Mega Construx Aliens Xenomorph Egg Slime Building Set

Introduction

Welcome to the Mega Construx Aliens Xenomorph Egg Slime Building Set. This set allows you to discover buildable Xenomorph micro action figures and Facehugger accessories hidden within a slimy Xenomorph egg. Designed for Probuilders aged 10 and up, this manual will guide you through the setup, assembly, and care of your new collectible.

What's Included:

• 1 Xenomorph Egg container
• 2 Buildable Xenomorph micro action figures (parts)
• 2 Facehugger accessories
• 1 Slime pool (slime)

Setup

1. Unpack the Egg: Carefully remove the Xenomorph Egg from its packaging.
2. Open the Egg: Gently separate the two halves of the Xenomorph Egg container.
3. Retrieve Contents: Inside, you will find a slime pool containing the parts for your micro action figures and accessories.

Image: Mega Construx Aliens Xenomorph Eggs in their retail packaging.

Assembly

The micro action figures require assembly. Refer to the included instruction sheet for detailed, step-by-step visual guidance. The figures are designed for articulation, allowing for various poses once assembled.

1. Extract Parts from Slime: Carefully remove all figure parts and accessories from the slime pool. It is recommended to do this over a protected surface.
2. Clean Parts: Wipe any excess slime from the figure parts and accessories before assembly.
3. Assemble Figures: Follow the visual instructions on the included paper guide to connect the various body parts of the Xenomorph micro action figures.
4. Attach Accessories: Once the figures are assembled, attach the Facehugger accessories as desired.

Image: Assembled Mega Construx Aliens Xenomorph figures and slime displayed outside the egg.

Operating / Play

Your Mega Construx Aliens figures are designed for dynamic play and display.

• Posing: Utilize the multiple points of articulation on the micro action figures to create various menacing poses.
• Slime Interaction: The included slime can be used for creative play scenarios, simulating the alien environment.
• Display: The Xenomorph Egg container can be used as a display base for your assembled figures.

Maintenance

• Cleaning Figures: If figures become dirty, wipe them gently with a damp cloth. Avoid harsh chemicals.
• Slime Care: Store the slime in an airtight container to prevent it from drying out. Keep away from direct sunlight and extreme temperatures.
• Storage: Store all components in a cool, dry place, preferably in their original packaging or a sealed container.

Troubleshooting

• Missing Parts: If any parts are missing upon opening, please contact Mega Construx customer support.
• Slime Drying Out: If the slime begins to dry, a very small amount of water can sometimes help restore its consistency. Do not add too much water.
• Figures Not Posing: Ensure all joints are correctly assembled and not obstructed by excess slime.

Specifications

Warranty & Support

For warranty information, replacement parts, or customer support, please visit the official Mega Construx website or contact their customer service department. Keep your proof of purchase for any warranty claims.