1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Amantii SYM-60-BESPOKE Symmetry Series Bespoke 60-Inch Built-in Electric Fireplace. Please read all instructions carefully before installation and use to ensure proper function and safety.
Figure 1: Amantii SYM-60-BESPOKE Electric Fireplace with vibrant orange and yellow flames over ice media.
2. Safety Information
Observe the following safety precautions to reduce the risk of fire, electric shock, or injury.
- Read all instructions before using this fireplace.
- This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains, at least 3 feet (0.9 m) from the front of the fireplace.
- Extreme caution is necessary when any fireplace is used by or near children or invalids and whenever the fireplace is left operating and unattended.
- Do not operate any fireplace with a damaged cord or plug or after the fireplace malfunctions, has been dropped, or damaged in any manner.
- Do not use outdoors. This fireplace is intended for indoor and approved outdoor installation.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect fireplace, turn controls to off, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fireplace.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This fireplace has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this fireplace only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug fireplaces directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This fireplace is designed for built-in installation. Ensure proper clearances are maintained as per installation instructions.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Amantii SYM-60-BESPOKE Electric Fireplace Unit
- Remote Control
- Ice Media (decorative glass crystals)
- Black Steel Surround
- Instruction Manual
Figure 2: Included Ice Media for the fireplace bed.
4. Installation
The Amantii SYM-60-BESPOKE is designed for built-in installation. Professional installation is recommended to ensure safety and proper function.
4.1 Site Preparation
- Ensure the installation location is structurally sound and can support the weight of the fireplace (approximately 88.6 pounds).
- Maintain proper clearances from combustible materials. Refer to local building codes.
- Ensure a dedicated 120V, 15 Amp circuit is available for the fireplace. The power cord length is 76 inches.
4.2 Dimensions and Framing
The overall dimensions of the unit are 60.25 inches (W) x 5.5 inches (D) x 15.625 inches (H). Refer to the technical drawing for precise framing dimensions.
Figure 3: Technical drawing with installation dimensions.
4.3 Built-in Installation Steps (General)
- Construct a framed opening according to the dimensions provided in the technical drawing.
- Carefully slide the fireplace unit into the opening.
- Secure the unit to the framing using appropriate fasteners.
- Install the decorative ice media onto the ember bed.
- Connect the unit to a grounded electrical outlet.
5. Operating Instructions
Your Amantii electric fireplace can be operated using the included remote control or the integrated control panel.
5.1 Remote Control
Figure 4: Remote Control.
The remote control allows you to power the unit on/off, adjust flame settings, control heat output, and activate the timer function.
5.2 Control Panel
Figure 5: Integrated Control Panel.
The control panel provides direct access to the fireplace functions, mirroring the remote control capabilities.
5.3 Flame Effects
The fireplace features lifelike LED flames with adjustable colors and brightness. You can cycle through various flame presentation colors to match your ambiance.
Figure 6: Various Flame Color Options.
Figure 7: Example of red and orange flame effect.
5.4 Heating Function
The unit includes an impressive heater with a quiet fan, providing up to 5100 BTU of heat output. It can be operated with or without heat for year-round use. The heater has high (1500 watts) and low (750 watts) settings.
5.5 Audio System
A premium audio system provides realistic crackling sounds, enhancing the fireplace experience. The audio can be turned on or off as desired.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric fireplace.
- Cleaning: Ensure the unit is turned off and unplugged before cleaning. Use a soft, damp cloth to clean the exterior surfaces. Do not use abrasive cleaners or sprays.
- Glass Panel: Clean the glass panel with a soft cloth and glass cleaner. Do not scratch the surface.
- Air Vents: Periodically check and clean the air intake and exhaust vents to ensure they are free from dust and debris, which can impede airflow and heating efficiency.
- Media: The decorative ice media can be removed and rinsed with water if needed. Ensure it is completely dry before placing it back in the unit.
7. Troubleshooting
If you encounter issues with your fireplace, refer to the following common troubleshooting steps. For persistent problems, contact customer support.
- No Power: Check if the unit is properly plugged into a grounded outlet. Verify the circuit breaker has not tripped.
- No Heat: Ensure the heater function is activated. Check if the air vents are clear of obstructions.
- Remote Not Working: Replace the batteries in the remote control. Ensure there are no obstructions between the remote and the fireplace sensor.
- Unusual Noises: A slight humming sound is normal during operation. If loud or unusual noises occur, turn off the unit and contact support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Amantii |
| Model Name | Symmetry Bespoke (SYM-60-BESPOKE) |
| Power Source | Corded Electric |
| Voltage | 120 V |
| Amps | 12.5 A |
| Heater Wattage (High) | 1500 watts |
| Heater Wattage (Low) | 750 watts |
| Heat Output | 5100 British Thermal Units |
| Product Dimensions (W x D x H) | 60.25" x 5.5" x 15.625" (153 cm x 14 cm x 39.7 cm) |
| Item Weight | 88.6 pounds (40.2 kg) |
| Material | Metal |
| Finish Type | Painted |
| Installation Type | Built In |
| Special Feature | Adjustable Flame |
| Included Components | Remote Control |
| Cord Length | 76 inches |
| Approx. Heating Area | 400 sq. ft. / 37 sqm |
| UPC | 696447447227 |
9. Warranty and Support
9.1 Warranty Information
This Amantii electric fireplace comes with a 5 Year Full Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
9.2 Customer Support
For technical assistance, replacement parts, or warranty inquiries, please contact Amantii customer support. Refer to the contact information provided with your product packaging or visit the official Amantii website.
