1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Trust Yuri 2.1 PC Speaker System. This 2.1 speaker system delivers dynamic bass and powerful sound, suitable for various audio applications.
Key features include a powerful 120W peak power (60W RMS) output, a wooden subwoofer with a 5.25-inch driver for enhanced bass, and a convenient wired volume control with integrated headphone and line-in connections. The system also features additional volume and bass adjustments on the subwoofer and smart power management for energy efficiency.
Image 1.1: Overview of the Trust Yuri 2.1 PC Speaker System highlighting 120W peak power, wooden subwoofer, and powerful bass capabilities.
2. Package Contents
Please verify that all items listed below are present in your package:
- 1x Subwoofer
- 2x Satellite Speakers
- 1x Wired Remote Control
- Necessary Audio Cables (3.5mm jack)
- Power Cable
Image 2.1: All components of the Trust Yuri 2.1 PC Speaker System, including the subwoofer, two satellite speakers, and the wired remote control.
3. Setup Instructions
Follow these steps to set up your speaker system:
- Positioning: Place the subwoofer on the floor, ideally near your desk. Position the two satellite speakers on either side of your monitor for optimal stereo sound.
- Connect Satellite Speakers: Connect the cables from the satellite speakers to the corresponding 'SPEAKERS' output jacks on the rear panel of the subwoofer (R for right, L for left).
- Connect Audio Source: Connect the 3.5mm audio cable from your PC, laptop, smartphone, or tablet to the 'INPUT' jack on the rear panel of the subwoofer. Alternatively, you can use the line-in connection on the wired remote control.
- Connect Wired Remote: Plug the wired remote control cable into the dedicated port on the subwoofer.
- Power Connection: Connect the power cable to the subwoofer and then plug it into a wall outlet.
- Power On: Flip the 'POWER' switch on the rear of the subwoofer to the 'ON' position.
Image 3.1: The Trust Yuri 2.1 PC Speaker System integrated into a desktop setup, demonstrating its compatibility with various devices.
Image 3.2: Detailed view of the subwoofer's rear panel, illustrating the connections for satellite speakers, audio input, and power, along with volume and bass adjustment knobs.
4. Operating Instructions
4.1 Power On/Off
To power on the system, ensure the power cable is connected and flip the 'POWER' switch on the subwoofer's rear panel to 'ON'. To power off, flip the switch to 'OFF'.
4.2 Volume Control
The main volume can be adjusted using the large rotary dial on the wired remote control. Rotate clockwise to increase volume and counter-clockwise to decrease it.
4.3 Bass Adjustment
The bass level can be fine-tuned using the 'BASS' knob located on the rear panel of the subwoofer. Adjust to your preference.
4.4 Headphone and Line-in Connections
The wired remote control features a headphone output and an auxiliary line-in input. Connect your headphones to the headphone jack for private listening. Connect an additional audio source (e.g., an MP3 player) to the line-in jack on the remote.
4.5 Smart Power Management
The system is equipped with smart power management. It will automatically enter standby mode when not in use for a period, conserving energy. To reactivate, simply play audio or touch the volume control.
Image 4.1: The wired remote control, featuring the main volume dial, headphone output, and auxiliary line-in input for convenient access.
5. Controls and Connections Overview
5.1 Wired Remote Control
- Volume Dial: Large rotary dial for adjusting the overall system volume.
- Headphone Jack: 3.5mm output for connecting headphones.
- Line-in Jack: 3.5mm input for connecting external audio devices.
5.2 Subwoofer Rear Panel
- SPEAKERS Output (R/L): RCA jacks for connecting the right and left satellite speakers.
- INPUT: 3.5mm jack for connecting the primary audio source.
- VOLUME Knob: Secondary volume adjustment.
- BASS Knob: Dedicated control for adjusting the subwoofer's bass level.
- POWER Switch: Main power toggle for the system.
- ECO Mode Switch: Toggles the smart power management feature.
- Power Input: For connecting the power cable.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | Trust |
| Model Number | 23696 |
| Speaker Type | 2.1 Speaker System with Subwoofer |
| Max Output Power | 120 Watts (Peak) |
| RMS Power | 60 Watts |
| Subwoofer Diameter | 5.25 Inches |
| Frequency Response | 20 Hz - 20000 Hz |
| Impedance | 4 ohms |
| Connectivity Technology | Auxiliary (3.5mm jack) |
| Compatible Devices | PC, Laptop, Tablet, Smartphone |
| Subwoofer Dimensions (L x W x H) | 24 cm x 18 cm x 24 cm |
| Satellite Speaker Dimensions (L x W x H) | 11 cm x 11 cm x 9 cm (approximate, based on images) |
| Item Weight | 3720 Grams |
| Color | Black |
| Special Features | Wired volume control, Smart power management |
7. Troubleshooting
If you encounter issues with your Trust Yuri 2.1 PC Speaker System, please refer to the following common problems and solutions:
- No Sound:
- Ensure the power cable is securely connected and the power switch on the subwoofer is 'ON'.
- Check all audio cables (from source to subwoofer, and satellite speakers to subwoofer) are firmly plugged in.
- Verify the volume on both the wired remote and your audio source (PC, smartphone) is turned up.
- If using the wired remote's line-in, ensure no headphones are plugged into the headphone jack, as this may mute the speakers.
- Distorted Sound:
- Reduce the volume on both the wired remote and your audio source.
- Adjust the bass level on the subwoofer's rear panel. Excessive bass can cause distortion.
- Ensure audio cables are not damaged or loosely connected.
- Humming or Static Noise:
- Ensure all connections are secure.
- Try plugging the speaker system into a different power outlet.
- Move the speakers away from other electronic devices that might cause interference.
- If the noise persists when the audio source is off, consider unplugging the speakers from the power outlet when not in use.
- Subwoofer Not Working:
- Check the bass knob on the subwoofer's rear panel and ensure it is not set to minimum.
- Verify the audio source is providing a full-range signal.
8. Maintenance
To ensure the longevity and optimal performance of your speaker system, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surfaces of the speakers and subwoofer. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
- Placement: Place the speakers on a stable, flat surface to prevent accidental falls. Avoid placing them in direct sunlight, near heat sources, or in areas with high humidity.
- Ventilation: Ensure the subwoofer has adequate ventilation. Do not block any vents or place it in an enclosed space that could restrict airflow.
- Cable Care: Handle cables carefully. Avoid bending them sharply or placing heavy objects on them, which can cause internal damage.
- Power Off: When not in use for extended periods, it is recommended to power off and unplug the system from the wall outlet.
9. Warranty and Support
Your Trust Yuri 2.1 PC Speaker System is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
Additionally, spare parts for this product are guaranteed to be available for 2 years.
For warranty claims, technical support, or further assistance, please refer to the official Trust website or contact your local retailer. Please retain your proof of purchase for warranty validation.
