Reaks King Size Electric Heated Mattress Pad User Manual

1. Product Overview

The Reaks King Size Electric Heated Mattress Pad provides customizable warmth and comfort for your bed. It features dual controls, multiple heat settings, and safety features to ensure a pleasant and secure sleeping experience.

Key Features:

• Customizable Warmth: 12 adjustable heat settings (87°F to 115°F).
• Rapid Preheat: Quickly warms the bed to your desired temperature.
• Smart Memory Control: Remembers your preferred heat settings.
• Adjustable Auto Shut-off: Timer from 1 to 12 hours for safety and convenience.
• Dual Control: Independent heat adjustment for each side of the bed (King size).
• Lighted Buttons: Easy operation in low light conditions.
• Enhanced Safety: Built-in overheating protection, ETL and FCC compliant.
• Easy Care: Machine washable design.

Image 1: The Reaks King Size Electric Heated Mattress Pad shown on a bed with its two independent controllers.

2. Setup Instructions

2.1 Unpacking and Inspection

1. Carefully remove the mattress pad and controllers from the packaging.
2. Inspect all components for any signs of damage. Do not use if damaged.

2.2 Placing the Mattress Pad

1. Lay the heated mattress pad flat on your mattress, ensuring the connectors are positioned at the foot end of the bed.
2. The pad features a 360° elastic skirt designed to fit mattresses up to 15 inches deep, ensuring a snug and secure fit.

Image 2: The mattress pad is designed to fit deep mattresses, up to 15 inches, with its elasticized skirt.

2.3 Connecting the Controllers

1. Locate the hidden connectors on the underside of the mattress pad at the foot end.
2. Connect each controller cord to its corresponding port on the mattress pad. Ensure a firm connection.
3. Route the power cords to a nearby electrical outlet, ensuring they are not pinched or tangled.
4. Plug the power cords into a standard 120V AC electrical outlet.

Image 3: Detail of the hidden connector located beneath the mattress pad for a seamless fit.

3. Operating Instructions

3.1 Powering On and Off

• Press the 'ON/OFF' button on the controller to turn the mattress pad on or off. The digital display will illuminate.

3.2 Adjusting Heat Settings

• Use the '+' and '-' buttons to select your desired heat level from 1 to 12. The current heat setting will be shown on the digital display.
• For King size pads, each side has an independent controller, allowing individual temperature preferences.

Image 4: The smart controller features 12 heat settings, a 1-12 hour auto shut-off timer, lighted buttons for visibility in the dark, and a clear digital display.

3.3 Using Preheat Mode

• Press the 'PREHEAT' button to quickly warm your bed to your last selected temperature. This mode is designed for rapid heating.

Image 5: The controller offers a rapid preheat function and smart memory to recall your preferred settings.

3.4 Setting the Auto Shut-off Timer

• Press the 'TIMER HEAT' button to cycle through the available auto shut-off times, from 1 to 12 hours. The selected duration will appear on the display.
• The mattress pad will automatically turn off after the set time, providing peace of mind and energy efficiency.

3.5 Dual Zone Heating (King Size)

• The King size mattress pad is equipped with two independent controllers, allowing each user to set their preferred heat level for their side of the bed.

Image 6: The zoned heating area allows for individual temperature control on each side of the bed, catering to different preferences.

4. Maintenance and Care

4.1 Cleaning Instructions

The Reaks Electric Heated Mattress Pad is machine washable for easy maintenance. Follow these steps:

1. Ensure the mattress pad is completely unplugged from the wall outlet.
2. Disconnect both controllers from the mattress pad by unlatching the connectors.
3. Machine wash the mattress pad in warm water on a gentle cycle.
4. Tumble dry on low heat. Ensure the pad is completely dry before reconnecting the controllers and plugging it back in.

4.2 Important Care Notes

• Do not dry clean.
• Do not iron.
• Do not bleach.
• Always ensure the mattress pad and connectors are completely dry before use to prevent electrical hazards.

Image 7: Detailed care instructions for machine washing and drying the mattress pad.

5. Troubleshooting

5.1 Common Issues and Solutions

• Pad not heating: Ensure all connections are secure and the power cord is firmly plugged into a working electrical outlet. Check if the auto shut-off timer has expired.
• Uneven heating: Verify that the mattress pad is spread evenly on the bed and not bunched up. Ensure both controllers (for King size) are set to the desired temperature.
• Feeling the wires: Due to the heating elements, a slight presence of wires may be felt through the padding. This is normal for heated mattress pads.

5.2 Contacting Customer Support

If you encounter any issues not covered in this section or require further assistance, please contact Reaks customer service. Refer to the 'Warranty & Support' section for contact information.

6. Specifications

Image 8: The mattress pad is certified for safety with ETL and FCC compliance, and includes overheating protection.

Image 9: An exploded view illustrating the construction of the mattress pad, including skin-friendly air layers, padding, heating wires, and protective layers.

7. Warranty & Support

For warranty information, product support, or any inquiries, please contact Reaks customer service. Details can typically be found on the product packaging or the official Reaks website.

We are committed to providing assistance and ensuring your satisfaction with your Reaks Electric Heated Mattress Pad.