Introduction
Thank you for purchasing the Muse M-150 CDB DAB+ FM PLL Dual Alarm Clock Radio. This manual provides essential information for the safe and correct operation of your device. Please read it thoroughly before use and retain it for future reference.
Product Features
- DAB+ and FM PLL Radio Tuner
- Dual Alarm Functionality
- Snooze and Sleep Functions
- LCD Display
- 20 Preset Stations (for both DAB+ and FM)
Package Contents
- Muse M-150 CDB DAB+ FM PLL Dual Alarm Clock Radio Unit
- AC Power Adapter
- Instruction Manual (this document)
Controls and Display
This image shows the Muse M-150 CDB DAB+ FM PLL Dual Alarm Clock Radio. The front features a dark grey casing and a bright LCD display showing 'DAB-MUSE' and icons for snooze and sleep. The top panel includes control buttons for functions like SNOOZE, SCAN, SELECT, and PRESET.
Front Panel:
- LCD Display: Shows time, radio station information, alarm status, and other operational details.
Top Panel Buttons:
- SNOOZE: Temporarily silences the alarm for a set period.
- SCAN: Initiates an automatic scan for DAB+ or FM radio stations.
- SELECT: Confirms selections in menu settings.
- PRESET: Accesses and saves radio station presets.
- TUNING/VOLUME +/-: Adjusts radio frequency or volume level.
- MODE: Switches between DAB+ and FM radio modes.
- POWER/STANDBY: Turns the unit on or off.
Setup
1. Power Connection
- Connect the supplied AC power adapter to the DC IN jack on the back of the unit.
- Plug the adapter into a standard wall outlet.
2. Initial Setup and DAB+ Scan
- Upon first power-on, the unit will automatically perform a full scan for DAB+ radio stations. This process may take a few minutes.
- The clock will automatically synchronize its time and date information from the DAB+ signal once stations are found.
- Ensure the antenna is fully extended for optimal reception during the scan.
Operating Instructions
1. Radio Operation (DAB+/FM)
- Switching Modes: Press the MODE button to switch between DAB+ and FM radio.
- DAB+ Tuning: After the initial scan, use the TUNING +/- buttons to navigate through available DAB+ stations. Press SELECT to confirm.
- FM Tuning: In FM mode, use the TUNING +/- buttons to manually tune to a frequency. Press SCAN to auto-scan for the next available station.
- Saving Presets: Tune to your desired station. Press and hold the PRESET button. Use TUNING +/- to select a preset number (1-20), then press SELECT to save.
- Recalling Presets: Press the PRESET button briefly, then use TUNING +/- to select your desired preset station and press SELECT.
- Volume Adjustment: Use the VOLUME +/- buttons to adjust the listening volume.
2. Setting Alarms
The unit features two independent alarms (Alarm 1 and Alarm 2).
- In standby mode, press and hold the ALARM 1 or ALARM 2 button.
- Use TUNING +/- to set the alarm hour, then press SELECT.
- Repeat for minutes, then press SELECT.
- Select alarm source (Buzzer, DAB+, or FM) using TUNING +/-, then press SELECT.
- Select alarm frequency (Daily, Weekdays, Weekends) using TUNING +/-, then press SELECT.
- Adjust alarm volume using TUNING +/-, then press SELECT to confirm and activate the alarm.
- An alarm icon will appear on the display when activated.
3. Snooze and Sleep Function
- Snooze: When an alarm sounds, press the SNOOZE button to temporarily silence it. The alarm will sound again after approximately 9 minutes.
- Sleep Function: While the radio is playing, press the SLEEP button repeatedly to cycle through sleep timer options (e.g., 15, 30, 60, 90 minutes, OFF). The radio will automatically turn off after the selected time.
4. Display Brightness
The display brightness can typically be adjusted by pressing a dedicated button (often labeled 'DIMMER' or integrated with another function) or through the menu settings. Refer to the specific button layout on your device for this function.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the unit. Do not use abrasive cleaners or solvents.
- Placement: Place the unit on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.
- Antenna: Ensure the telescopic antenna is fully extended for optimal radio reception.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected or faulty outlet. | Check power connections. Try a different outlet. |
| Poor radio reception | Antenna not extended or weak signal. | Fully extend the antenna. Reposition the unit for better signal. Perform a new DAB+ scan. |
| Alarm does not sound | Alarm not activated or set incorrectly. | Verify alarm settings and ensure the alarm icon is visible on the display. Check alarm volume. |
| Display is too bright/dim | Brightness setting needs adjustment. | Adjust the display brightness using the dedicated button or menu option. |
Specifications
| Feature | Detail |
|---|---|
| Brand | MUSE |
| Model Number | M-150 CDB |
| Colour | Dark Grey |
| Product Dimensions | 11.8 x 6.7 x 7.5 cm |
| Item Weight | 280 g |
| Voltage | 240 Volts (AC) |
| Material | Metal |
| Display Type | LCD |
| Special Features | Alarm, Radio, Snooze |
Warranty Information
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging or contact your retailer for specific terms and conditions.
Customer Support
For further assistance, technical support, or service inquiries, please contact your retailer or the official Muse customer support channels. Contact information can typically be found on the manufacturer's website or in your product documentation.
