Cooler Master MPY-850V-AFBAG-US
Contents
Cooler Master V850 Gold V2 Power Supply User Manual
Model: MPY-850V-AFBAG-US
1. Introduction
The Cooler Master V850 Gold V2 power supply unit (PSU) is engineered to provide a high-quality and reliable power solution for your personal computer. Featuring 80 Plus Gold efficiency, full-modular cabling, and a semi-fanless operation mode, this PSU ensures stable power delivery while maintaining quiet performance. Its robust design incorporates 100% Japanese capacitors, a half-bridge LLC resonant converter, and DC-DC circuitry for enhanced durability and efficiency.

Figure 1.1: Cooler Master V850 Gold V2 Power Supply and its retail packaging.
2. Safety Information
Please read and understand all safety instructions before installing or operating this power supply. Failure to do so may result in personal injury or damage to the product or connected components.
- Always disconnect the power cord from the wall outlet before installing, removing, or servicing the PSU or any other computer components.
- This PSU is designed for use in personal computers only. Do not use it for any other purpose.
- Do not open the PSU casing. High voltages are present inside, and opening it will void the warranty.
- Ensure proper grounding to prevent electrical shock.
- Install the PSU in a well-ventilated area, away from heat sources, direct sunlight, and moisture.
- Use only the modular cables provided with this PSU. Using incompatible cables may cause damage.
3. Package Contents
Verify that all items listed below are included in your package:
- Cooler Master V850 Gold V2 Power Supply Unit
- Full Set of Modular Cables (including 24-pin ATX, 8-pin EPS, 6+2-pin PCIe, SATA, and Peripheral connectors)
- AC Power Cord
- Mounting Screws
- Cable Storage Bag
- User Manual (this document)
4. Setup and Installation
Follow these steps to properly install your Cooler Master V850 Gold V2 PSU into your computer system.
- Prepare Your System: Ensure your computer is powered off and unplugged from the wall outlet. Open your PC case to access the PSU mounting area.
- Mount the PSU: Carefully slide the V850 Gold V2 PSU into the designated power supply bay in your PC case. Secure it using the provided mounting screws.
- Connect Modular Cables: This PSU features a full-modular design, allowing you to connect only the cables you need. Refer to the diagrams below for connector types and proper orientation.

Figure 4.1: Full-modular cabling interface on the V850 Gold V2 PSU. Connectors are clearly labeled for easy identification.

Figure 4.2: The thicker 16 AWG PCIe cables allow for higher currents, less heat resistance, and improved overall efficiency and lower ambient temperatures for safer, more stable system operation.
- Connect to Components:
- Motherboard: Connect the 24-pin ATX cable to your motherboard.
- CPU: Connect the 8-pin EPS (CPU) cable(s) to the CPU power connector(s) on your motherboard.
- Graphics Card(s): Connect the 6+2-pin PCIe cables to your graphics card(s). Ensure all required power connectors on the GPU are utilized.
- Storage Devices: Connect SATA power cables to your SSDs, HDDs, and optical drives.
- Peripherals: Connect peripheral (Molex) cables for fans or other accessories as needed.
- Secure Cables: Route and secure all cables using cable ties to ensure proper airflow and a tidy build.
- Connect AC Power: Plug the provided AC power cord into the PSU's AC inlet and then into a wall outlet.
Video 4.1: Official Cooler Master V Gold V2 Series overview, demonstrating key features and design elements of the power supply.
5. Operating the PSU
The Cooler Master V850 Gold V2 is designed for efficient and quiet operation.
5.1 Semi-Fanless Mode with Hybrid Switch
The 135mm Fluid Dynamic Bearing (FDB) fan operates in a semi-fanless mode, meaning it will remain off under low load conditions (typically up to 40% load) to minimize noise. The fan will automatically activate when the load exceeds this threshold to ensure optimal cooling.

Figure 5.1: The Hybrid switch allows manual control over the semi-fanless mode, enabling the fan to be turned on or off regardless of load.
You can manually control the fan's operation using the Hybrid Switch located on the rear of the PSU. Toggle the switch to enable or disable the semi-fanless mode based on your preference for noise levels versus continuous cooling.
5.2 80 Plus Gold Efficiency
The 80 Plus Gold certification ensures that the V850 Gold V2 operates with high energy efficiency, converting a significant percentage of AC power into usable DC power for your components, thereby reducing wasted energy and heat generation.

Figure 5.2: The 80 Plus Gold efficiency rating indicates how much power is retained or lost when transferring from the wall to your components, with a typical efficiency of 90% guaranteed.
6. Maintenance
To ensure the longevity and optimal performance of your Cooler Master V850 Gold V2 PSU, periodic maintenance is recommended.
- Keep it Clean: Regularly clean the exterior of the PSU and the fan grille to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air to gently remove dust from the fan blades and internal components (ensure PSU is unplugged and discharged before cleaning).
- Ensure Proper Airflow: Make sure there are no obstructions around the PSU's intake and exhaust vents within your PC case. Good airflow is crucial for heat dissipation.

Figure 6.1: The Fluid Dynamic Bearing (FDB) fan generates less friction, ideal for low RPM operations, ensuring smooth and efficient performance for extended periods while maintaining low noise levels.
7. Troubleshooting
If you encounter issues with your Cooler Master V850 Gold V2 PSU, refer to the following common troubleshooting steps:
- No Power:
- Ensure the AC power cord is securely plugged into both the PSU and the wall outlet.
- Check that the ON/OFF switch on the back of the PSU is in the 'ON' position.
- Verify all modular cables are correctly and firmly connected to both the PSU and your components (motherboard, GPU, etc.).
- Test the wall outlet with another device to ensure it is supplying power.
- System Instability/Crashes:
- Ensure your PSU wattage is sufficient for all your components. The V850 Gold V2 provides 850W, which is ample for most high-performance systems.
- Check for loose cable connections.
- If overclocking, try returning to default settings to rule out power instability.
- Excessive Fan Noise:
- If the Hybrid Switch is set to 'OFF', the fan will run continuously. Toggle it to 'ON' to enable semi-fanless mode under low loads.
- Ensure the PSU fan is not obstructed by cables or dust buildup. Clean if necessary.
- High system load will cause the fan to spin faster and louder. This is normal operation.
If issues persist after following these steps, please contact Cooler Master customer support.
8. Specifications
| Feature | Description |
|---|---|
| Brand | Cooler Master |
| Series | V850 Gold V2 |
| Model Number | MPY-850V-AFBAG-US |
| Output Wattage | 850 Watts |
| Efficiency Rating | 80 PLUS Gold |
| Form Factor | ATX |
| Cooling Method | Air (135mm FDB Fan) |
| Fan Mode | Semi-fanless with Hybrid Switch |
| Cabling | Full Modular (16 AWG PCIe cables) |
| Dimensions (LxWxH) | 6.3 x 5.91 x 3.39 inches |
| Item Weight | 6.3 pounds |
| Compatible Devices | Personal Computer |
| Date First Available | August 10, 2020 |
9. Warranty and Support
The Cooler Master V850 Gold V2 Power Supply comes with a 10-year warranty, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or further inquiries, please visit the official Cooler Master website or contact their customer service department.
Cooler Master Official Website: www.coolermaster.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.