1. Product Overview
This manual provides essential information for the installation, maintenance, and troubleshooting of your new sparefixd Upper Spray Arm, designed as a direct replacement part for various Baumatic dishwasher models. This component is crucial for effective water distribution during the wash cycle, ensuring thorough cleaning of your dishes.
Image: The sparefixd Upper Spray Arm, a replacement part for Baumatic dishwashers. It is a curved, grey plastic component with a central hub for attachment and multiple small holes along its length for water dispersion.
2. Compatibility
The sparefixd Upper Spray Arm (Part Number: 07010384) is compatible with the following Baumatic dishwasher models. Please verify your dishwasher's model number before proceeding with installation. The model number is typically located inside the dishwasher door (on the side or top), or on the back of the appliance.
- BDF671SS, BDF671W, BDF682SL, BDF683BL, BDF683SS
- BDI630, BDI631, BDI633, BDI652, BDI680, BDI681
- BDS670BL, BDS670SS, BDS670W
- BDW01.1SS, BDW01SS, BDW1.1BL, BDW13, BDW15, BDW15.BK, BDW16, BDW17, BDW1SS, BDW1W, BDW2SS, BDW2W
- BFD62W, BFD63SS, BFD64SS, BFD65W, BFD66SL, BFD66W, BFD671SS
- BID60SS, BWDI631
- HL13, HL62B, HL63X, HL65B
- MG5, SB5, SUPREMA2SS, TG5
3. Installation (Setup)
Follow these steps to safely replace the upper spray arm in your Baumatic dishwasher. Always ensure the appliance is disconnected from the power supply before beginning any maintenance or installation.
- Safety First: Disconnect the dishwasher from the main power supply by unplugging it or switching off the circuit breaker.
- Empty the Dishwasher: Remove all dishes, racks, and any other items from the dishwasher interior.
- Locate the Upper Spray Arm: The upper spray arm is typically located beneath the upper dish rack.
- Remove the Old Spray Arm: Depending on your model, the spray arm may be held in place by a retaining nut, a clip, or simply by being pushed onto a central water feed tube. Gently twist or unclip the old spray arm to remove it. Note how it was attached for reassembly.
- Inspect the Water Feed Tube: Check the central water feed tube for any blockages or damage. Clean if necessary.
- Install the New Spray Arm: Align the new sparefixd upper spray arm with the central water feed tube. Push it firmly into place or secure it with the retaining nut/clip, ensuring it clicks or locks securely. Make sure it can rotate freely without obstruction.
- Test Rotation: Manually spin the spray arm to confirm it rotates smoothly and does not catch on any part of the dishwasher interior.
- Restore Power: Reconnect the dishwasher to the power supply.
- Test Cycle: Run a short wash cycle without dishes to check for proper water spray and rotation of the new arm. Listen for any unusual noises.
4. Maintenance
Regular maintenance of your upper spray arm ensures optimal dishwasher performance and longevity.
- Regular Cleaning: Periodically remove the spray arm (as per installation steps 1-4) and rinse it under running water to remove any food particles or debris that may clog the spray holes.
- Check Spray Holes: Use a small, pointed object (like a toothpick) to clear any stubborn blockages from the spray holes.
- Inspect for Damage: Routinely check the spray arm for cracks, warping, or any signs of wear. A damaged spray arm can lead to poor cleaning results.
- Mineral Deposits: If you live in an area with hard water, mineral deposits can build up. Use a dishwasher cleaner or a vinegar rinse cycle to help dissolve these deposits.
5. Troubleshooting
If you experience issues with your dishwasher's cleaning performance, the upper spray arm may be a contributing factor. Here are some common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishes not clean (especially upper rack) | Clogged spray arm holes | Remove and clean the spray arm, clearing all holes. |
| Spray arm not rotating | Obstruction (e.g., tall dish), damaged central hub, low water pressure | Ensure no items block rotation. Check for damage to the spray arm's central hub. Verify water supply pressure. |
| Unusual noise during wash cycle | Spray arm hitting dishes or interior | Rearrange dishes to ensure clearance. Check if the spray arm is correctly installed and secured. |
| Water leaking from spray arm connection | Improper installation or damaged seal | Reinstall the spray arm, ensuring it is securely attached. Inspect the seal or O-ring for damage and replace if necessary. |
6. Specifications
- Product Type: Upper Spray Arm
- Brand: sparefixd
- Part Number (Model): 07010384
- Compatibility: Designed for specific Baumatic dishwasher models (refer to Section 2 for full list).
- Material: Durable plastic composite
7. Warranty Information
This sparefixd product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact sparefixd customer support. Keep your proof of purchase for warranty claims.
8. Customer Support
If you require further assistance with the installation, maintenance, or troubleshooting of your sparefixd Upper Spray Arm, please contact your retailer or the sparefixd customer support team. When contacting support, please have your product's part number (07010384) and your dishwasher's model number ready.
For general inquiries or to find more information, you may visit the official sparefixd website (if available, link not provided in source data).