1. Introduction
The Carlinkit CPC200-U2W Plus is a wireless CarPlay adapter designed to convert your car's existing wired CarPlay system into a wireless one. This device utilizes a fast 5G chip and 5.8Ghz WiFi to provide a stable and lag-free connection, enhancing your in-car entertainment and navigation experience. It is compatible with iPhone 6 and above, running iOS 10 or later, and cars equipped with original wired CarPlay.
Figure 1.1: Carlinkit CPC200-U2W Plus Wireless CarPlay Adapter.
2. Features
- Wireless CarPlay Conversion: Transforms your car's wired CarPlay into a wireless connection, eliminating the need for cables.
- Advanced Chipset: Features a faster Wi-Fi 5 chipset for improved signal stability and reduced latency in calls and audio.
- Plug and Play: Simple connection process; no additional drivers or apps required for initial setup.
- Automatic Connection: After the initial pairing, the adapter automatically connects when you start your car.
- OTA Upgrade Support: Allows for online firmware updates to optimize performance and user experience.
- Carbon Fiber Material: Durable design that prevents scratches.
Figure 2.1: Seamless upgrade from wired to wireless CarPlay.
Figure 2.2: The adapter features a low-power 5.0~5.8GHz WiFi chip for stable performance.
3. Setup Guide
3.1 Initial Connection
- Insert the Carlinkit CPC200-U2W Plus adapter into your car’s USB port. This is typically the same port used for wired CarPlay.
- On your iPhone, turn on both Wi-Fi and Bluetooth.
- Go to your iPhone's Bluetooth settings and search for the Bluetooth name displayed on your car's screen.
- Select the device name to connect.
- After successful pairing, your car's display will switch to wireless CarPlay.
Figure 3.1: Plug and Play installation into the car's USB port.
Figure 3.2: Visual guide for the three-step setup process.
4. Operating Instructions
4.1 CarPlay Functions
Once connected, you can utilize all standard CarPlay functions wirelessly, including:
- Navigation: Use mainstream map applications for real-time directions.
- Music Playback: Stream music from your iPhone.
- Siri Control: Activate Siri for voice commands.
- Making Calls: Initiate and receive calls hands-free.
- Split Screen Effect: View multiple applications simultaneously on your car's display.
- Custom Wallpaper: Personalize your CarPlay interface with custom backgrounds.
Figure 4.1: Overview of available CarPlay functions.
Figure 4.2: Siri voice control for music and other features.
Figure 4.3: Real-time map for navigation using voice commands.
Figure 4.4: Quickly read messages with voice control for safer driving.
4.2 Automatic Reconnection
After the initial successful pairing, the adapter will automatically reconnect to your iPhone when you get into the car, providing a seamless experience without manual intervention.
Figure 4.5: The adapter automatically recognizes and connects to your iPhone.
4.3 Switching Devices
If you need to switch between multiple iPhone devices, simply click on the desired phone name in the connection list on your car's screen to switch. Ensure that Wi-Fi and Bluetooth are turned off on any other connected iPhones to avoid interference.
Figure 4.6: Instructions for quickly switching between paired iPhones.
4.4 Official Product Video
Video 4.1: An official demonstration of the Carlinkit 3.0 Wireless CarPlay Adapter Dongle in use, showcasing its features and seamless operation.
5. Maintenance
5.1 Firmware Updates (OTA)
The Carlinkit CPC200-U2W Plus supports Over-The-Air (OTA) firmware updates to ensure optimal performance and compatibility. It is recommended to keep your device updated.
- Insert the adapter into the car's USB port.
- On your iPhone, turn on Wi-Fi and connect to the adapter's Wi-Fi signal. The Wi-Fi name typically follows the English name of the car, and the default password is '12345678'.
- Open your iPhone's browser (e.g., Safari) and enter the URL: http://192.168.50.2 to access the device's background interface.
- Navigate to the help page and click 'Check updates' to upgrade online.
Note: If the product is working normally, there is no need to update the version. Self-upgrade may cause product damage if not performed correctly.
Figure 5.1: Interface for checking and performing online firmware updates.
6. Troubleshooting
6.1 No Response When Plugged In
Q: What should I do if there is no response when I plug in the product?
A: 1. Pull out the product, at first check the original car's wired Apple CarPlay can be used normally.
2. Click Settings on your original car system - Click "restore factory settings".
3. Plug the cable of product into the USB port of the car (the same port that used to connect the CarPlay with a data cable).
4. Connect the Type-C end of the cable to the product and wait for a while (the first identification may be slower).
5. For the first use, connect the iPhone to the product with the data cable to improve product compatibility.
6.2 Cannot Connect Automatically
Q: Can't connect automatically.
A: 1. Please turn on your phone's Bluetooth and WLAN, and make sure both Bluetooth and WLAN do not connect to other devices. Neglect the original car Bluetooth.
2. (1) Connect the adapter's WiFi signal with your phone (password: 12345678).
(2) Open the iPhone browser: Safari and enter the URL 192.168.50.2; Adjust the "start delay" to "20" and turn on the "Auto Connect".
6.3 Stuck in Connection State
Q: When stuck in the connection state, and it keeps connecting, what should I do?
A: 1. Please click settings - clear pair list, and ignore the Bluetooth pairing record on the phone, then restart your phone.
2. Restore the factory settings of the original car.
6.4 iPhone Cannot Identify Product Bluetooth/WiFi
Q: My iPhone can identify the product Bluetooth/WiFi, but my car does not enter the connection page.
A: 1. Reset the box.
2. Restore the factory settings of your original car system.
3. Replace a data cable for connection.
6.5 WiFi Error and BT Error
Q: WiFi error and BT error.
A: Contact the store customer service for version update.
6.6 Cannot Hear Others on Phone
Q: What should I do if I can't hear others on the phone?
A: Please select CarPlay from Audio in your phone call interface.
6.7 Heat Problems During Use
Q: What should I do if I encounter heat problems during using product?
A: 1. It is best to use the original data cable of the product, thin wire will cause heat problem.
2. Please do not expose to direct sunlight or non-ventilation.
7. Product Specifications
- Product Dimensions: 3.15 x 1.81 x 0.51 inches
- Item Weight: 1.2 ounces
- Item Model Number: CPC200-U2W Plus
- Manufacturer: Carlinkit
- Connectivity Technology: Wireless, USB
- Power Source: USB
- Material: Carbon Fibre
Figure 7.1: The adapter features both Type-C and standard USB ports for connectivity.
8. Safety Information
Please observe the following safety guidelines:
- Potential interference with other wireless devices may occur.
- Follow all battery handling precautions if applicable (though this device is USB powered, general electronic safety applies).
- Keep software up to date for safety improvements and optimal performance.
9. Warranty and Support
Dear user, thank you for using this product. To protect your rights and interests, we provide you with high-quality after-sales service.
- Warranty: Enjoy a one-year global warranty from the date of purchase. This warranty covers failures caused by quality problems under normal use.
- Technical Support: Permanent technical service support is available to ensure your product performance and user experience.
Please keep your purchase proof properly, as it is necessary for warranty service. The company reserves the right to interpret the after-sales service of this product.
