Lexicon 4983BU-NT

Lexicon Constance Metal Daybed with Trundle Instruction Manual

Model: 4983BU-NT

Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your Lexicon Constance Metal Daybed with Trundle. Please read this manual thoroughly before assembly and retain it for future reference.

Lexicon Constance Metal Daybed in Navy Blue with trundle stored underneath

Figure 1: Lexicon Constance Metal Daybed with Trundle in Navy Blue, shown with the trundle unit stored beneath the main daybed frame.

Safety Information

  • Weight Limit: The daybed has a maximum weight capacity of 300 lbs (136 kg). Do not exceed this limit.
  • Mattress Thickness: For the trundle unit, use a twin mattress no thicker than 8 inches (20 cm) to ensure proper storage and operation.
  • Assembly: Assembly is required. Ensure all parts are securely fastened before use.
  • Supervision: Children should be supervised when operating the trundle unit to prevent injury.
  • Placement: Place the daybed on a level surface.

Setup and Assembly

The Lexicon Constance Metal Daybed with Trundle requires assembly. Follow the included assembly instructions carefully. Ensure all components are present before beginning.

Key Assembly Steps:

  1. Unpack all components and verify against the parts list.
  2. Assemble the main daybed frame according to the diagrams.
  3. Assemble the trundle unit frame, ensuring the folding legs and casters are correctly installed.
  4. Insert the trundle unit beneath the main daybed frame.
  5. Place the appropriate twin mattresses on both the daybed and trundle unit.
Dimensions of Lexicon Constance Metal Daybed with Trundle extended

Figure 2: The daybed with the trundle unit fully extended, illustrating the overall dimensions of 41.5"L x 78.5"W x 44"H. The trundle unit is shown at an elevated height, flush with the main daybed.

Video 1: Product Display Video. This video demonstrates the assembly and functionality of a metal daybed with a lift-up trundle, showing how the trundle can be pulled out and raised to the same height as the main bed.

Operating Instructions

Deploying the Trundle Unit:

  1. Ensure the area in front of the daybed is clear.
  2. Gently pull the trundle unit out from underneath the main daybed frame. The casters will facilitate smooth movement.
  3. Once fully extended, locate the folding legs on the trundle unit.
  4. Lift the trundle unit frame until the folding legs engage and lock into their upright position. This will raise the trundle mattress to the same height as the main daybed mattress.

Storing the Trundle Unit:

  1. Ensure the trundle unit is clear of any bedding or obstructions.
  2. Disengage the folding legs, allowing the trundle unit to lower.
  3. Gently push the trundle unit back underneath the main daybed frame until it is fully stored.
Lexicon Constance Metal Daybed with Trundle extended, showing two twin beds

Figure 3: The Lexicon Constance Metal Daybed with Trundle in its fully extended configuration, effectively creating two separate twin-sized sleeping surfaces.

Maintenance

  • Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners.
  • Mattress Care: Follow the care instructions provided with your mattresses. The product description states "Dry Clean Only" for product care instructions, which likely refers to the fabric components of the daybed or specific bedding, not the metal frame itself.
  • Hardware: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary.
  • Casters: Keep trundle casters free of debris to ensure smooth operation.

Troubleshooting

ProblemPossible CauseSolution
Trundle unit does not slide smoothly.Debris in casters or uneven flooring.Clean casters. Ensure the daybed is on a level surface.
Trundle unit does not lift or lower correctly.Folding legs are jammed or mechanism is obstructed.Check for obstructions. Ensure the mattress on the trundle is not too thick (max 8 inches).
Bed feels unstable or wobbly.Loose hardware.Inspect and tighten all bolts and screws.

Specifications

  • Model: 4983BU-NT
  • Brand: Lexicon
  • Color: Navy Blue
  • Material: Metal
  • Form Factor: Day Bed, Trundle Bed
  • Size: Twin
  • Product Dimensions (L x W x H): 78.5" x 41.5" x 44" (199.4 cm x 105.4 cm x 111.8 cm)
  • Trundle Dimensions (L x W x H): 71" x 41" x 4"/15.5" (180.3 cm x 104.1 cm x 10.2 cm/39.4 cm) - Note: 4" height when stored, 15.5" height when lifted.
  • Item Weight: 71.8 lbs (32.6 kg)
  • Maximum Weight Recommendation: 300 lbs (136 kg)
  • Recommended Trundle Mattress Thickness: Max 8 inches (20 cm)
  • Assembly: Required

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Lexicon customer service directly. Keep your proof of purchase for warranty claims.

Contact Information: Please refer to the manufacturer's official website or the packaging for the most current contact details.

© 2023 Lexicon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.