Introduction
This manual provides instructions for the safe and efficient operation of your VOBAGA Coffee Mug Warmer, Model V16006. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, basic safety precautions should always be followed, including:
- Read all instructions before using the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical hazards, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- The heating plate is hot during operation and remains hot for a period after use. A blinking red light indicates the heating plate is hot.
- Use only flat-bottomed, thin-walled mugs for optimal heat transfer.
Product Overview
The VOBAGA Coffee Mug Warmer is designed to keep your beverages at an optimal drinking temperature. It features three temperature settings and an automatic shut-off function for safety.
The warmer consists of a heating plate and a single touch button for power and temperature control.
Setup
- Unpack the mug warmer and ensure all components are present and undamaged.
- Place the mug warmer on a flat, stable, and heat-resistant surface.
- Ensure the power cord is not obstructed and is away from water sources.
- Plug the UL-certified power cord into a standard 110V electrical outlet.
Operating Instructions
The VOBAGA Coffee Mug Warmer features a single touch button for control and three temperature settings.
Power On/Off and Temperature Adjustment
- To Power On: Place your mug with a hot beverage on the heating plate. Tap the power button once. The indicator light will illuminate.
- Temperature Settings:
- Tap once: Highest temperature (approximately 149°F / 65°C). Indicator light: Red.
- Tap twice: Medium temperature (approximately 131°F / 55°C). Indicator light: Pink.
- Tap three times: Lowest temperature (approximately 104°F / 40°C). Indicator light: Blue.
- To Power Off: Tap the power button a fourth time, or simply remove the mug from the heating plate. The device will automatically shut off after 4 hours of continuous operation.
Automatic Shut-off and Residual Heating Reminder
- The mug warmer will automatically shut off after 4 hours of continuous operation as a safety feature.
- After the device is turned off, the indicator light may blink red. This signifies that the heating plate is still hot. The blinking will stop once the temperature drops below 97°F (36°C). Exercise caution when the light is blinking.
Mug Compatibility
For optimal performance, use flat-bottomed, thin-walled mugs. The heating plate is designed to accommodate most standard mug sizes.
Maintenance
Regular cleaning ensures the longevity and proper function of your mug warmer.
- Always unplug the device and allow it to cool completely before cleaning.
- Wipe the heating plate and exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners, scouring pads, or harsh chemicals.
- Do not immerse the mug warmer in water or any other liquid.
Troubleshooting
If you encounter issues with your VOBAGA Coffee Mug Warmer, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Warmer does not turn on. | Not plugged in; power outlet malfunction; device malfunction. | Ensure the power cord is securely plugged into a working outlet. Try a different outlet. If the issue persists, contact customer service. |
| Beverage is not warm enough. | Incorrect temperature setting; unsuitable mug type; liquid was cold initially. | Select a higher temperature setting. Use a flat-bottomed, thin-walled mug. The warmer is designed to maintain warmth, not rapidly heat cold liquids. Ensure the beverage is already hot when placed on the warmer. |
| Indicator light is blinking red after turning off. | Residual heat on the plate. | This is a normal safety feature. The light indicates the plate is still hot. Avoid touching the surface until the light stops blinking. |
| Warmer automatically shut off. | 4-hour auto shut-off activated. | This is a safety feature. To resume warming, turn the device back on. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | V16006 |
| Brand | VOBAGA |
| Voltage | 110 Volts |
| Wattage | 20 watts |
| Maximum Temperature | 149°F (65°C) |
| Product Dimensions | 5.32 x 4.33 x 0.79 inches (13.5 x 11 x 2 cm) |
| Item Weight | 10.2 ounces |
| Heating Plate Material | 3.54 Inch Heating Plate with Sturdy Material |
| Cord Length | 59.06 inches (150 cm) |
| Auto Shut-off | After 4 hours of continuous operation |
Warranty and Support
VOBAGA is committed to customer satisfaction. For any questions, concerns, or support needs regarding your VOBAGA Coffee Mug Warmer, please contact our customer service team. We aim to resolve any issues within 24 hours.
For more information or to access additional support resources, please refer to the official VOBAGA website or the contact information provided with your purchase.
