Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your PDP Gaming Faceoff Deluxe Wireless Switch Pro Controller. Designed for Nintendo Switch, Switch Lite, and Switch OLED, this controller offers wireless freedom, customizable features, and motion control capabilities to enhance your gaming experience.
Figure 1: Front view of the PDP Gaming Faceoff Deluxe Wireless Switch Pro Controller, highlighting its wireless capability.
Setup
Charging the Controller
Before initial use, ensure your controller is fully charged. The controller features a built-in rechargeable battery designed for up to 40 hours of gameplay on a single charge.
- Locate the USB charging port on the top edge of the controller.
- Connect the provided USB charging cable to the controller's port and the other end to a USB power source (e.g., Nintendo Switch dock, USB wall adapter, computer USB port).
- The LED indicators on the front of the controller will illuminate to show charging status. They will turn off or change color when fully charged.
Figure 2: The top of the controller, indicating the USB charging port for power input.
Pairing with Nintendo Switch
Follow these steps to wirelessly connect your controller to your Nintendo Switch console:
- Ensure your Nintendo Switch console is powered on and updated to the latest system software.
- From the HOME Menu, select Controllers, then Change Grip/Order.
- On your PDP Gaming Faceoff Deluxe Wireless Switch Pro Controller, press and hold the Sync Button (located on the top edge, near the charging port) for a few seconds until the player LEDs begin to flash.
- Once the controller is successfully paired, the player LED(s) corresponding to its assigned player number will remain lit.
- The controller has a wireless range of 30 feet. Ensure you are within this range for optimal performance.
Operating Instructions
Controller Layout and Functions
The PDP Gaming Faceoff Deluxe Wireless Switch Pro Controller features a standard layout with additional customizable elements.
- Analog Sticks: Two precision analog sticks for movement and camera control. An additional precision analog stick is included for replacement or preference.
- D-Pad: Directional pad for precise input.
- Face Buttons (A, B, X, Y): Standard action buttons.
- Shoulder Buttons (L, R) & Triggers (ZL, ZR): Located on the top of the controller for various in-game actions.
- Plus (+) and Minus (-) Buttons: System menu navigation.
- Home Button: Returns to the Nintendo Switch HOME Menu.
- Capture Button: Takes screenshots or video clips.
Figure 3: Overview of the controller's front buttons and analog sticks.
Customizable Features
This controller allows for personalization to suit your gaming style.
- Interchangeable Faceplate: The unique design allows you to swap out the front faceplate for a different look. Gently lift the existing faceplate from the edges to remove it, and snap a new one into place.
- Interchangeable Joysticks/Thumbsticks: The analog stick caps can be removed and replaced with different styles or heights for improved comfort and precision.
- Programmable Back Buttons (Paddles): Two programmable back buttons are located on the underside of the controller. These can be assigned to replicate any other button on the controller for quick access during gameplay. Refer to the specific programming instructions provided with the controller or on the manufacturer's website for detailed steps.
Figure 4: The controller's interchangeable faceplate feature.
Figure 5: The underside of the controller, featuring the programmable back paddles.
Motion Control
The controller supports motion control features, allowing for immersive gameplay in compatible titles such as Mario Kart 8, Mario Party, Arms, Splatoon 2, and Zelda Breath of the Wild. Ensure the game supports motion controls and that the feature is enabled in the game's settings if applicable.
Maintenance
Cleaning
To maintain the appearance and functionality of your controller:
- Use a soft, dry cloth to wipe down the controller's surface.
- For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the controller.
- Clean around buttons and analog sticks carefully to prevent debris buildup.
Storage and Battery Care
- Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping or subjecting the controller to strong impacts.
- To prolong battery life, avoid fully discharging the battery frequently. Charge the controller regularly, even if not in constant use.
- If storing for an extended period, charge the battery to approximately 50% before storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller does not connect/pair. | Out of range, low battery, pairing issue, console software outdated. |
|
| Buttons or analog sticks are unresponsive. | Debris under buttons, software glitch, physical damage. |
|
| Battery life is shorter than expected. | Aging battery, frequent full discharge, environmental factors. |
|
Specifications
- Model Number: 500-202-NA-CMPK
- Connectivity: Wireless
- Compatibility: Nintendo Switch, Nintendo Switch Lite, Nintendo Switch OLED
- Battery: 1 Lithium Polymer battery (included)
- Battery Life: Up to 40 hours per charge (approximate)
- Wireless Range: Up to 30 feet (approximate)
- Dimensions (L x W x H): 0.28 x 0.63 x 0.63 inches (Controller only, approximate)
- Weight: 14.1 ounces (approximate)
- Motion Control: Supported
- Customization: Interchangeable faceplate, interchangeable joysticks, programmable back paddles
Warranty Information
This product is covered by a limited manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included with your product packaging or visit the official PDP website. Keep your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact PDP customer support through their official website or the contact information provided in your product documentation. You can visit the PDP Store on Amazon for more product information.
