Motor Trend SafeKeeper Heavy Duty Car Cover (Fits up to 190" Length)

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Motor Trend SafeKeeper Heavy Duty Car Cover Instruction Manual

Model: SafeKeeper Heavy Duty Car Cover (Fits up to 190" Length)

Introduction

The Motor Trend SafeKeeper Heavy Duty Car Cover is designed to provide comprehensive protection for your vehicle against various environmental elements. This multi-layered cover shields your car from UV rays, rain, snow, dust, pollen, tree sap, and debris, helping to preserve its exterior and interior condition. Crafted from water-resistant, breathable materials, it prevents moisture buildup while ensuring proper ventilation. The UV-resistant fabric protects against sun fading and heat damage, making it suitable for year-round use.

Key Features

  • Universal Fit: Designed to fit most standard vehicles, including cars, trucks, SUVs, and vans, providing reliable protection.
  • Multi-Layered Design: Features multiple layers for superior protection against UV rays, snow, rain, dust, and scratches. The waterproof exterior blocks moisture, while the soft felt interior prevents scratches.
  • Heavy-Duty Protection: Reinforced seams and sturdy construction ensure lasting use.
  • Secure Straps: Three adjustable buckles and straps secure the cover in place, even in windy conditions, tested to withstand winds up to 70 MPH.
  • Full Coverage: Elastic hems provide a snug fit, preventing moisture buildup and wind lift.
  • Reflective Strips: Strategically placed reflective strips enhance visibility in low-light conditions, reducing the risk of accidental impact.
  • Scratch-Proof Lining: The soft inner lining is thoroughly tested to prevent damage to your vehicle's exterior.
Motor Trend SafeKeeper Car Cover with All Weather Protection Icons

Image: Motor Trend SafeKeeper Car Cover highlighting all-weather protection.

Close-up of adjustable buckle strap on car cover

Image: Close-up of the adjustable buckle strap, designed for secure fitment against wind.

Reflective safety strips on car cover for night visibility

Image: Reflective safety strips on the car cover, ensuring high visibility at night.

Close-up of scratch-resistant inner lining of car cover

Image: Close-up of the soft, scratch-resistant inner lining, protecting the vehicle's paintwork.

Installation & Usage

1. Vehicle Measurement

Before purchasing or installing the cover, measure your vehicle's length from front to rear. Refer to the product sizing chart to select the appropriate cover size. If your vehicle is between sizes, it is recommended to choose a size up for easier installation and complete coverage.

2. Cover Placement

Carefully unfold the car cover and identify the front and rear sections. Position the cover over your vehicle, starting from the front bumper and gradually pulling it towards the rear, ensuring even distribution.

3. Securing the Cover

Locate the three adjustable buckle straps on the underside of the cover. Fasten these straps securely beneath the vehicle to prevent the cover from shifting or being blown off by wind. Adjust the straps for a snug fit around the vehicle's perimeter.

Video: Official product video demonstrating the features and installation of the Motor Trend All Weather Multi-Layer Car Covers. This video highlights the waterproof material, secure buckle system, reflective strips, and scratch-proof lining, providing a visual guide to the product's benefits and proper usage.

Maintenance & Care

Cleaning

To ensure maximum protection and prevent scratches, always install the car cover on a clean vehicle. Ensure the vehicle's exterior is free of any dirt, dust, or debris before covering. The cover itself can be cleaned with mild soap and water, then air-dried.

Prolonged Use Advisory

Car covers are intended for temporary protection and should not be left on a vehicle for extended periods (beyond a few weeks) without removal. Prolonged use without periodic removal may lead to trapped moisture, condensation buildup, and potential damage to the paint or clear coat. It is recommended to periodically remove the cover, allow the vehicle to air out, and inspect for any signs of moisture accumulation or wear.

Troubleshooting

Scratches on Vehicle

If scratches occur, ensure the vehicle was thoroughly cleaned before cover installation. Dirt or debris trapped between the cover and the vehicle's surface can cause abrasion. Always install the cover on a clean, dry vehicle.

Cover Wear in Extreme Climates

In regions with extreme weather conditions (e.g., intense sun, high heat, heavy snow), the cover may experience accelerated wear. While designed for all-weather use, continuous exposure to severe elements can impact its lifespan. Regular inspection and adherence to the prolonged use advisory can help mitigate this.

Specifications

BrandMotor Trend
ModelSafeKeeper Heavy Duty Car Cover (Fits up to 190" Length)
ColorSilver Up to 190"
MaterialFelt, Polyester, Vinyl
Vehicle Service TypeCar, SUV, Truck, Van
Fit TypeUniversal Fit
UV ProtectionYes
Water Resistance LevelWaterproof
Item Dimensions (L x W x H)190 x 70 x 50 inches
Item Weight12 Pounds
UPC826942150593

What's in the Box

  • Car Cover
  • Storage Bag

Warranty & Support

This Motor Trend SafeKeeper Car Cover comes with a 1-Year Manufacturer's Warranty. For any product-related inquiries or support, please contact the manufacturer directly. For returns or replacements, refer to the Amazon return policy, which typically allows returns within 30 days of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.