HUMAX R8705

Humax HD Nano Digital Satellite Receiver User Manual

Model: R8705

Introduction

This manual provides comprehensive instructions for the Humax HD Nano Digital Satellite Receiver (Model R8705). This device is designed to deliver high-resolution television viewing up to 1080i/1080p via HDMI, and also supports older television sets through its SCART interface. It comes with pre-installed channel lists for immediate use, eliminating the need for manual channel scanning. Its 12V power capability makes it suitable for mobile use, such as camping.

Package Contents

Please verify that all items listed below are included in your package:

  • Humax HD Nano Satellite Receiver
  • Remote Control
  • Batteries (AAA)
  • Power Adapter (12V)
  • User Manual (German, refer to this document for English instructions)
Humax HD Nano Satellite Receiver and accessories including remote control and power adapter, with dimensions shown.

Image: Humax HD Nano Satellite Receiver with its dimensions (9.6cm depth, 15cm width, 3.6cm height) and included accessories: remote control and power adapter.

Setup

Follow these steps to set up your Humax HD Nano Digital Satellite Receiver:

  1. Connect to Television:
    • For modern TVs, connect the receiver to your TV using an HDMI cable (not included).
    • For older TVs, connect the receiver to your TV using a SCART cable (not included).
  2. Connect to Satellite Dish: Connect your satellite dish cable to the "LNB IN" port on the back of the receiver.
  3. Power Connection: Connect the provided 12V power adapter to the receiver and then to a power outlet. For camping or mobile use, connect the 12V adapter to a compatible 12V power source.
  4. Insert Batteries: Open the battery compartment of the remote control and insert the two AAA batteries.
  5. Power On: Press the power button on the remote control or the receiver to turn on the device.
  6. Initial Setup: The receiver comes with a pre-installed channel list for Astra satellites, so no initial channel scan is typically required. If prompted, follow the on-screen instructions for language selection and basic settings.
Rear view of Humax HD Nano Satellite Receiver showing HDMI, Optical, SCART, and 12V DC connections.

Image: The rear panel of the Humax HD Nano receiver, highlighting the HDMI and SCART connection ports for versatile TV compatibility.

Humax HD Nano Satellite Receiver next to a satellite dish, indicating its capability to receive all free satellite programs.

Image: The Humax HD Nano receiver positioned with a satellite dish, illustrating its function for receiving all free satellite programs (HD+SD).

Operating Instructions

Once set up, operating your Humax HD Nano receiver is straightforward:

  • Power On/Off: Use the red power button on the remote control to turn the receiver on or off.
  • Channel Selection: Use the CH+ and CH- buttons to navigate through channels, or enter channel numbers directly using the numeric keypad.
  • Volume Control: Adjust the volume using the VOL+ and VOL- buttons.
  • Menu Access: Press the MENU button to access the receiver's main menu for settings, channel management, and other features.
  • HDTV and Dolby Digital: Enjoy crisp HDTV picture quality and impressive Dolby Digital sound output for an enhanced viewing experience.
Hand holding Humax remote control with TV screen in background, illustrating channel selection and general operation.

Image: A hand operating the remote control, demonstrating typical usage for channel changing and volume adjustment. The screen in the background shows a television program.

Maintenance

To ensure the longevity and optimal performance of your Humax HD Nano receiver, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the receiver. Do not use liquid cleaners or abrasive materials.
  • Ventilation: Ensure the receiver has adequate ventilation. Do not block the ventilation openings.
  • Storage: When not in use for extended periods, store the receiver in a cool, dry place away from direct sunlight and extreme temperatures.
  • Power Disconnection: Disconnect the power adapter from the wall outlet during electrical storms or when leaving the device unattended for a long time.

Troubleshooting

If you encounter issues with your Humax HD Nano receiver, refer to the following common troubleshooting tips:

Problem Possible Cause Solution
No picture or sound
  • Power cable disconnected
  • HDMI/SCART cable loose or incorrect input selected on TV
  • Satellite signal issue
  • Check power connection to receiver and outlet.
  • Ensure HDMI/SCART cable is securely connected and TV input is correct.
  • Check satellite dish alignment and cable connection.
Remote control not working
  • Dead batteries
  • Obstruction between remote and receiver
  • Replace batteries with new AAA batteries.
  • Ensure clear line of sight to the receiver's IR sensor.
Poor picture quality
  • Weak satellite signal
  • Incorrect display settings
  • Check satellite dish alignment.
  • Adjust display settings in the receiver's menu.

Specifications

Brand HUMAX
Model Number R8705
Color Black
Dimensions (L x W x H) 9.6 cm x 15 cm x 3.6 cm
Weight 100 Grams
Connectivity Technology HDMI
Total HDMI Ports 1
Total USB Ports 1
Analog Video Output SCART
Audio Output Mode Surround (Dolby Digital)
Compatible Devices Television
Power Supply 12V DC Adapter
Battery Composition (Remote) Alkaline (2x AAA)

Warranty and Support

For warranty information and technical support, please refer to the official HUMAX website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Online Resources: www.humaxdigital.com

Related Documents - R8705

Preview Humax PDR iCord HD User Manual: Setup, Operation, and Troubleshooting
Comprehensive user manual for the Humax PDR iCord HD HDTV-Festplatten-Receiver, detailing setup, installation, basic operation, PVR functions, channel management, preferences, and troubleshooting.
Preview HUMAX PDR iCord HD Bedienungsanleitung
Umfassende Bedienungsanleitung für den HUMAX PDR iCord HD HDTV-Festplatten-Receiver. Enthält Informationen zur Installation, Bedienung, Fehlerbehebung und technischen Daten.
Preview Humax PTT1000 UHD Movistar+ Receiver User Manual
User manual for the Humax PTT1000 UHD Movistar+ receiver, providing setup, operation, and troubleshooting information.
Preview Humax FOXSAT-HDR User Manual: Satellite HD Digital Television Recorder Guide
Comprehensive user manual for the Humax FOXSAT-HDR, detailing setup, operation, features, and troubleshooting for your Satellite HD Digital Television Recorder.
Preview HUMAX IR-ACE II/SII Digital Satellite Receiver User Manual
User manual for HUMAX IR-ACE II and IR-ACE SII digital satellite receivers, detailing setup, installation, operation, channel management, preferences, troubleshooting, and system specifications. Includes safety guidelines and trademark information.
Preview HUMAX HD-FOX T2 User's Manual: Setup, Operation, and Features
This user manual provides comprehensive guidance for the HUMAX HD-FOX T2 HD Digital Receiver, covering installation, basic operations, channel management, media playback, preferences, system settings, and troubleshooting. Learn how to set up and maximize your viewing experience with this digital receiver.