UNICOO Electric Height Adjustable 2-Tier Mobile Standing Desk User Manual

Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your UNICOO Electric Height Adjustable 2-Tier Mobile Standing Desk. Please read this guide thoroughly before use to ensure proper function and safety. This desk is designed to enhance ergonomic comfort and productivity in various work environments.

Safety Information

Your UNICOO Electric Height Adjustable Desk is equipped with several safety features to ensure secure operation. These include collision avoidance, overheat protection, and auto balance protection. Always ensure the desk is on a stable, level surface before adjusting height. Keep hands and objects clear of moving parts during operation. Do not overload the desk beyond its maximum weight recommendation of 225 pounds.

Setup and Assembly

Assembly of the UNICOO Electric Height Adjustable Desk typically requires one person and takes approximately 30-90 minutes. All necessary tools are included, though a power drill may expedite the process. Follow the steps below for proper assembly:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all components are present against the parts list in the included guide.
2. Assemble Legs and Crossbar: Attach the legs to the crossbar using the provided M6x8mm screws. Ensure the motor drive shaft is correctly aligned.
3. Attach Base to Legs: Secure the base feet to the bottom of each leg using the M6x35mm screws.
4. Install Side Plates: Attach the side plates to the frame using the M6x8mm screws.
5. Connect Transmission Rod: Loosen the knob on the transmission rod, insert one end into the hole in the left leg, and smoothly connect the other end to the motor drive shaft on the right leg. Tighten the pre-assembled set screw and the knob.
6. Attach Desktop: Carefully place the desktop onto the assembled frame, ensuring proper alignment with the pre-drilled holes. Secure the desktop using the M5x15mm screws.
7. Install Headphone Hangers and Controller: Attach the side headphone hangers and the control panel to the underside of the desktop using the M5x15mm screws.
8. Connect Cables: Connect all motor and control panel cables as indicated in the detailed diagram. Use the provided cable clips to manage wires for a tidy setup.
9. Final Check: Ensure all screws are tightened and connections are secure before powering on the desk.

Operating Instructions

Your UNICOO Electric Height Adjustable Desk offers seamless height adjustments and convenient features for an optimized workspace.

Electric Height Adjustment

Use the up and down arrow buttons on the control panel to smoothly adjust the desk height. The desk can transition between a minimum height of 30 inches and a maximum height of 48 inches, accommodating various sitting and standing preferences.

Programmable Height Settings

The control panel features programmable memory settings (1, 2, 3) to save your preferred heights. To set a height, adjust the desk to the desired level, then press the 'S' (Set) button followed by the desired number (1, 2, or 3). The desk will then automatically move to this saved height with a single press of the corresponding number button.

Dual-Tier Design and Storage

The 2-tier design includes an elevated monitor stand for optimal screen positioning and a lower level for your keyboard and other essentials. This design promotes an organized workspace. The desk also features integrated storage solutions to keep your area tidy.

Mobility with Wheels

The desk is equipped with wheels for easy mobility. Each wheel includes a locking mechanism to secure the desk in place when needed. To move the desk, unlock the wheels. To stabilize the desk, lock the wheels.

Maintenance

To maintain the longevity and appearance of your UNICOO desk, follow these care instructions:

• Clean with a soft, damp cloth.
• Avoid abrasive materials and cleaners.
• Use a microfiber cloth or soft dusting implement for dusting.
• Wipe up spills promptly.
• Avoid placing heavy or sharp objects that may damage the surface.
• Do not expose to extreme temperatures or moisture.
• Refer to the manufacturer for specific care instructions if needed.

Troubleshooting

If you encounter issues with your desk, refer to the following common troubleshooting steps:

• Desk is stuck or not adjusting: If the desk becomes stuck or displays an error code (e.g., "A5E"), try resetting the system. Unplug the desk from the power outlet, wait for at least 30 seconds, then plug it back in. If the issue persists, consult the full troubleshooting guide or contact customer support.
• Uneven height adjustment: Ensure the desk is placed on a level surface. Check that all leg components are securely tightened.
• Noise during adjustment: A slight motor sound is normal during height adjustment. If the noise is excessive or unusual, ensure all screws are tight and no obstructions are present.

Specifications

Warranty and Support

This product comes with a Limited Warranty. For detailed information regarding warranty coverage, claims, or technical support, please refer to the warranty documentation included with your purchase or contact UNICOO customer service directly.