1. Introduction
Thank you for choosing the YAHEETECH 36-inch Cat Tree Tower. This multi-level cat tree is designed to provide a comfortable and engaging environment for your feline companions. It features double condos, a large plush perch, and scratching surfaces to satisfy your cat's natural instincts. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and enjoyable use of your new cat tree.
Figure 1: YAHEETECH 36-inch Cat Tree Tower, showcasing its multi-level design, double condos, plush perch, and scratching ramp.
2. Safety Instructions
- Ensure all parts are securely fastened during assembly to prevent instability.
- Place the cat tree on a flat, stable surface.
- Utilize the included anti-toppling kit to secure the cat tree to a wall for enhanced stability, especially if you have active or multiple cats.
- Regularly inspect the cat tree for loose or damaged parts. Replace or repair as needed.
- Keep small children away from the cat tree during assembly and ensure they do not climb on it.
- This product is intended for indoor cat use only.
Figure 2: The anti-toppling kit, which should be used to secure the cat tree to a wall for maximum stability.
3. Parts List
Before assembly, verify that all components are present and undamaged. Refer to the assembly video for visual identification of parts.
- Platforms: Base plate, middle platform, top platform (plush perch).
- Condos: Two enclosed cat condos.
- Posts: Various support posts, some wrapped with natural sisal rope for scratching.
- Ramp: One scratching ramp.
- Accessories: Hanging play ball, anti-toppling strap, screws, and Allen key.
4. Setup and Assembly
Assembly is straightforward with the included step-by-step instructions and hardware. An electronic version of the manual can be accessed by scanning the QR code provided in the physical instructions. For visual guidance, please refer to the official assembly video below.
Video 1: Official assembly guide for a similar cat tree with two condos. This video demonstrates the step-by-step process of connecting posts, platforms, and condos using the provided hardware.
- Base Assembly: Attach the initial support posts to the base plate using the appropriate screws.
- First Condo & Platform: Secure the first cat condo and its supporting posts to the base assembly.
- Second Condo & Platform: Continue by attaching the second cat condo and its posts, building upwards.
- Top Perch: Fasten the plush top perch to the uppermost posts.
- Scratching Ramp: Attach the scratching ramp to its designated position.
- Accessories: Install the hanging play ball and the anti-toppling strap.
Ensure all screws are tightened securely, but do not overtighten. Once assembled, gently test the stability of the cat tree before allowing your cats to use it.
Figure 3: Detailed dimensions of the cat tree, showing its 36-inch height and various platform sizes.
5. Operating Instructions
The YAHEETECH Cat Tree Tower offers multiple features for your cat's enjoyment and comfort:
- Plush Perch: The oversized top platform with soft raised edges provides a comfortable spot for resting and observing surroundings.
- Double Condos: Two spacious, soft-lined condos offer private, secure spaces for napping and hiding.
- Scratching Posts & Ramp: Multiple posts wrapped with natural sisal rope and a dedicated scratching board ramp encourage healthy scratching habits, protecting your furniture.
- Hanging Play Ball: An attached jingly dangling ball provides interactive entertainment.
Figure 4: A cat comfortably resting on the soft, elevated top perch, demonstrating its suitability for relaxation.
Figure 5: A cat actively using both the sisal-wrapped scratching post and the scratching ramp, highlighting the various scratching options.
6. Maintenance
- Cleaning: Clean the plush surfaces with a damp cloth and a mild cleanser. Use a dry cloth to blot out any water and allow it to air dry completely.
- Inspection: Periodically check all connections and posts for tightness. Re-tighten any loose screws to maintain structural integrity.
- Damage: If any part becomes significantly damaged, consider replacing the affected component or the entire unit to ensure your pet's safety.
7. Troubleshooting
- Instability: If the cat tree wobbles, ensure it is placed on a level surface. Double-check all screw connections for tightness and confirm the anti-toppling kit is properly installed and secured to a wall stud.
- Cat Not Using: Introduce your cat to the tree gradually. Place treats or familiar toys on different levels. Catnip can also be used to encourage exploration.
- Excessive Shedding: The plush material may shed slightly initially. Regular vacuuming can help manage this.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Number | 592958 |
| Product Dimensions | 49.02 x 45.72 x 91.44 cm (19.3 x 18 x 36 inches) |
| Item Weight | 10.55 kg (23.26 lbs) |
| Material | Polyester, P2 grade particleboard, Natural Sisal Rope |
| Color | Light Gray |
| Mounting Type | Floor Mount (with optional wall anchor) |
| Recommended Breeds | All Breed Sizes (Small and Medium sized cats recommended) |
| Specific Uses | Climbing, Jumping, Scratching, Resting |
9. Warranty and Customer Support
While specific warranty details are not provided in this manual, Yaheetech is committed to customer satisfaction. If you encounter any problems or have questions regarding your YAHEETECH Cat Tree Tower, please do not hesitate to contact our customer service. Our team is ready to assist you with any concerns.
For assistance, please refer to the contact information provided with your purchase or visit the official Yaheetech website.
