Introduction
This manual provides essential instructions for the proper use, setup, and maintenance of your Invicta Men's Star Wars 52mm Stainless Steel Quartz Watch, Model 40621. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece.
Image: Invicta Men's Star Wars 52mm Stainless Steel Quartz Watch, Model 40621. The watch features a silver stainless steel case and band, a black dial with green accents, and a depiction of Grogu (The Child) from Star Wars at the 6 o'clock position. The bezel is uni-directional with green markings. The watch has chronograph sub-dials and a screw-down crown with pushers.
Setup
1. Setting the Time
- Unscrew the Crown: The watch features a screw-down crown. Rotate the crown counter-clockwise until it is released from the case.
- Pull the Crown: Gently pull the crown out to the second click position. This will stop the second hand.
- Adjust Time: Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the desired time.
- Push and Screw Down the Crown: Once the time is set, push the crown back into the first click position, then gently push it in and rotate clockwise to screw it back into the case. Ensure it is securely tightened to maintain water resistance.
2. Adjusting the Band
The stainless steel band can be adjusted by adding or removing links. This procedure typically requires specialized tools and is best performed by a qualified watch technician to avoid damage to the band or clasp. The band features a fold-over safety clasp for secure wearing.
Operating the Watch
1. Chronograph Function
Your watch is equipped with a quartz chronograph movement, allowing for precise time measurement.
- Start/Stop: Press the upper pusher (button) to start the chronograph. Press it again to stop the measurement.
- Reset: While the chronograph is stopped, press the lower pusher to reset all chronograph hands to their zero positions.
2. Uni-directional Bezel
The watch features a uni-directional rotating bezel. This bezel can be used to measure elapsed time, typically for diving or other timed activities. Rotate the bezel counter-clockwise to align the zero marker with the minute hand at the start of your timed event. The minute hand will then indicate the elapsed time against the bezel's scale.
3. Water Resistance
This watch is water resistant to 100 meters (10 ATM). This rating makes it suitable for swimming and snorkeling. Do not operate the crown or pushers while the watch is submerged or wet, as this can compromise the water resistance. Always ensure the screw-down crown is fully tightened before exposing the watch to water.
Maintenance
1. Cleaning
To maintain the appearance of your watch, regularly wipe the case and band with a soft, dry cloth. For stainless steel, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
2. Battery Replacement
As a quartz watch, it is powered by a battery. The battery life typically ranges from 2 to 5 years, depending on usage. When the battery needs replacement, it is recommended to have this service performed by an authorized Invicta service center or a professional watchmaker to ensure proper sealing and maintain water resistance.
Troubleshooting
- Watch Not Running: Check if the crown is pushed in and screwed down. If the watch still does not run, the battery may need replacement.
- Chronograph Hands Not Resetting to Zero: This may require a chronograph reset procedure. Consult a professional watch technician if the issue persists after a battery change.
- Water Inside the Watch: If you notice condensation or water inside the watch, immediately take it to a professional watch repair center. Do not attempt to dry it yourself, as this can cause further damage.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 40621 |
| Case Size | 52mm |
| Case Material | Stainless Steel |
| Dial Color | Black, Green |
| Movement Type | Quartz |
| Band Material | Stainless Steel |
| Band Length | 190mm |
| Band Width | 26mm |
| Clasp Type | Fold over safety Clasp |
| Crown Type | Screw Down Crown |
| Bezel Type | Uni-directional Bezel |
| Water Resistance | 100 meters |
| Product Dimensions | 18.29 x 13.46 x 12.7 cm |
| Item Weight | 558 g |
Warranty and Support
For information regarding warranty coverage, service, or technical support, please refer to the official Invicta website or contact Invicta customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Official Invicta Website: www.invictawatch.com
