1. Introduction
The MOOER Air Plug AP10 is a compact and portable 2.4GHz wireless system designed to provide a cable-free connection for various instruments. It is suitable for electric guitars, violins, acoustic instruments equipped with piezoelectric pickups, and other compatible devices. This system offers a low-latency, reliable audio transmission, enhancing freedom of movement during practice or performance.
2. Safety Information
- Do not disassemble or modify the device.
- Keep the device away from water, moisture, and extreme temperatures.
- Use only the provided USB charging cable or a certified equivalent.
- Avoid dropping or subjecting the device to strong impacts.
- Dispose of batteries responsibly according to local regulations.
3. Package Contents
- 1x MOOER Air Plug AP10 Transmitter
- 1x MOOER Air Plug AP10 Receiver
- 1x USB Charging Cable
- 1x Carrying Pouch
- 1x User Manual
4. Product Overview
The MOOER Air Plug AP10 system consists of a transmitter and a receiver, both featuring a compact design and intuitive controls.

Image 4.1: The MOOER Air Plug AP10 wireless system, showing both the transmitter and receiver units. Each unit features an ON/OFF switch and channel indicator LEDs (A, B, C, D).
4.1 Components and Indicators
- Transmitter: Plugs into your instrument. Features an ON/OFF switch and channel selection LEDs.
- Receiver: Plugs into your amplifier, pedalboard, or audio interface. Features an ON/OFF switch and channel selection LEDs.
- Channel LEDs (A, B, C, D): Indicate the currently selected wireless channel.
- Power/Status LED: Indicates power status and charging.
5. Setup
5.1 Initial Charging
Before first use, ensure both the transmitter and receiver units are fully charged.
- Connect the supplied USB charging cable to the charging port on each unit.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer's USB port.
- The Power/Status LED will indicate charging status (e.g., red for charging, off or green for fully charged).
- A full charge typically takes approximately 2 hours.

Image 5.1: Illustration of the MOOER Air Plug AP10 units with a graphic representing built-in rechargeable batteries and charging.
5.2 Connecting the System
- Plug the Transmitter unit into the output jack of your instrument (e.g., guitar, violin).
- Plug the Receiver unit into the input jack of your amplifier, pedalboard, or audio interface.

Image 5.2: A hand inserting the MOOER Air Plug AP10 transmitter into the output jack of an electric guitar.

Image 5.3: The MOOER Air Plug AP10 transmitter connected to an acoustic guitar, demonstrating its compatibility with various instrument types.

Image 5.4: The MOOER Air Plug AP10 receiver connected to an amplifier, ready for audio output.
5.3 Angle Adjustment
The plug on both the transmitter and receiver units can be adjusted up to 225 degrees to accommodate various instrument jack positions and ensure a secure fit without obstruction.

Image 5.5: A diagram illustrating the 225-degree angle adjustment feature of the MOOER Air Plug AP10, allowing flexible positioning.
6. Operating Instructions
6.1 Power On/Off
- To power on, slide the ON/OFF switch on both the transmitter and receiver to the "ON" position. The status LEDs will illuminate.
- To power off, slide the ON/OFF switch on both units to the "OFF" position. The LEDs will turn off.
6.2 Channel Selection and Pairing
The AP10 system operates on the 2.4GHz frequency band and features multiple channels (A, B, C, D) to avoid interference.
- Upon powering on, the transmitter and receiver will automatically attempt to pair. The channel LEDs will flash during pairing.
- Once paired, the corresponding channel LED (e.g., 'A') on both units will remain steadily lit.
- If interference occurs or you wish to use multiple AP10 systems simultaneously, you can manually select a different channel. Press the "CHANNEL" button on both the transmitter and receiver to cycle through channels A, B, C, and D. Ensure both units are set to the same channel for proper operation.
6.3 Active and Passive Pickups
The MOOER Air Plug AP10 is compatible with both active and passive pickups, providing versatility for various instruments. No special settings are required for switching between pickup types.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the units. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the units in the provided carrying pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the units frequently. If storing for extended periods, charge the units to approximately 50% every few months.

Image 7.1: The MOOER Air Plug AP10 transmitter and receiver alongside their carrying pouch, emphasizing portability and protection.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Interference or static noise. |
|
|
| Units not charging. |
|
|
9. Specifications
| Model Number | AP10 |
| Wireless Frequency | 2.4GHz |
| Transmission Range | Up to 50 feet (approx. 15 meters) |
| Battery Type | Built-in Lithium Ion rechargeable battery |
| Battery Life | Up to 5 hours (approximate, varies with usage) |
| Compatible Devices | Electric Guitar, Violin, Acoustic Instruments with Piezoelectric Pickups, other instruments with 1/4" output |
| Item Weight | 7.8 ounces (approx. 221 grams) |
| Package Dimensions | 5.63 x 5.12 x 1.81 inches (approx. 14.3 x 13 x 4.6 cm) |
10. Warranty and Support
MOOER products are designed and manufactured to high-quality standards. For specific warranty information and terms, please refer to the warranty card included with your purchase or visit the official MOOER website.
For technical support, troubleshooting assistance, or service inquiries, please contact MOOER customer support through their official website or the retailer from whom you purchased the product.
MOOER Official Website: Visit the MOOER Store on Amazon