PaiPaitek Vibrating Dog Collar PD 523V User Manual

Introduction

Thank you for choosing the PaiPaitek Vibrating Dog Collar. This device is designed to assist in humane and effective dog training through vibration and sound, without the use of static shock. It is suitable for dogs weighing 5-120 lbs and offers a long range for versatile training environments. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.

Image: The PaiPaitek Vibrating Dog Collar receiver and remote control unit.

Safety Guidelines

• No Shock Design: This collar is designed without static shock prongs, ensuring a humane training experience. It uses only vibration and sound.
• Proper Fit: Ensure the collar fits snugly but not too tightly. You should be able to fit two fingers comfortably under the collar. A loose collar may not deliver consistent vibration, and a too-tight collar can cause skin irritation.
• Supervision: Always supervise your dog during training sessions. Do not leave the collar on your dog for more than 12 hours a day.
• Age and Weight: This collar is suitable for dogs weighing 5-120 lbs. Do not use on puppies under 6 months old.
• Skin Health: Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.

Image: Illustration highlighting the humane, no-shock, no-prongs design of the collar.

Package Contents

Please check the package to ensure all items are present:

• Remote Transmitter x 1
• Receiver x 1
• Lanyard x 1
• Nylon Collar Strap x 1
• USB Charging Cable x 1
• User Manual x 1
• Box x 1

Product Components Overview

Familiarize yourself with the remote transmitter and receiver components:

Image: Detailed diagram showing the various buttons and indicators on the remote transmitter and receiver, including mode indication, channel display, vibration level, battery display, power button, signal channel button, sound button, sound+vibration button, level adjustment buttons, charging port, indicator light, and on/off button.

Remote Transmitter

• Mode Indication: Displays the current training mode (Beep, Vibration, Beep+Vibration).
• Channel Display: Shows the selected dog channel (1, 2, or 3).
• Vibration Level: Indicates the current vibration intensity (1-100).
• Battery Display: Shows the remote's battery level.
• Power Button: Turns the remote on/off.
• Signal Channel Button: Switches between dog channels.
• Sound Button: Activates the beep sound.
• Sound+Vibration Button: Activates both sound and vibration simultaneously.
• Level +/- Buttons: Adjusts the vibration intensity.
• Charging Port: For charging the remote.

Receiver

• Indicator Light: Shows power status and activity.
• ON/OFF Button: Turns the receiver on/off.
• Charging Port: For charging the receiver.

Charging the Device

Before first use, fully charge both the remote transmitter and the receiver. A full charge typically takes 2-3 hours.

1. Connect the USB charging cable to the charging ports on both the remote and the receiver.
2. Plug the other end of the USB cable into a standard USB wall adapter (not included) or a computer's USB port.
3. The indicator lights on both devices will show charging status (refer to the device's specific light behavior for full charge indication, usually a solid light or light turning off).
4. Once fully charged, disconnect the devices from the charging cable.

The collar boasts a long battery life, with up to 20 days of work time for the receiver and 160 days for the remote on a single charge, depending on usage.

Image: Visual representation of the long battery life for both the collar receiver (20 days) and the remote transmitter (160 days), highlighting easy charging.

Getting Started (Setup)

1. Turning On/Off

• Receiver: Press and hold the ON/OFF button on the receiver until the indicator light turns on/off.
• Remote: Press and hold the Power button on the remote until the screen lights up/turns off.

2. Pairing the Remote and Receiver

The devices are usually pre-paired from the factory. If they are not responding, follow these steps to pair them:

1. Ensure both the remote and receiver are turned off.
2. Turn on the remote transmitter.
3. Press and hold the ON/OFF button on the receiver until the indicator light flashes rapidly.
4. While the receiver light is flashing, press any training mode button (Beep, Vibration, or Beep+Vibration) on the remote.
5. The receiver's indicator light will stop flashing and remain solid, indicating successful pairing.

3. Fitting the Collar

Proper fit is crucial for the collar's effectiveness and your dog's comfort.

1. Place the receiver on the center of your dog's neck, just below the chin.
2. Adjust the nylon strap so it is snug but not tight. You should be able to fit two fingers between the collar strap and your dog's neck.
3. The collar is adjustable to fit neck girths from 8 to 27 inches, suitable for dogs weighing 5 to 120 lbs.

Image: The adjustable collar strap designed to fit dogs from 5 to 120 lbs, with neck sizes from 8 to 27 inches.

Operating the Collar

Training Modes

The PaiPaitek collar offers three distinct training modes:

• Beep Mode: Delivers an audible tone. Useful for attention-getting or as a warning before a vibration.
• Vibration Mode: Delivers a tactile vibration. The intensity can be adjusted from 1 to 100 levels.
• Beep + Vibration Mode: Delivers both an audible tone and vibration simultaneously.

Image: Visual representation of the three training modes: Beep, Vibration (1-100 levels), and Beep+Vibration (1-100 levels).

Adjusting Vibration Intensity

Use the + and - buttons on the remote to adjust the vibration intensity from level 1 to 100. Start with the lowest effective level and gradually increase if necessary.

Multi-Dog Control

The remote transmitter can control up to three receivers (collars) simultaneously. To switch between dogs, press the Signal Channel button on the remote. The channel display will show the selected dog (1, 2, or 3).

Image: The remote control unit demonstrating its ability to train up to three dogs by switching between different collar channels.

Effective Training Practices

This collar is a training aid, not a punishment device. Consistency and positive reinforcement are key to successful training.

• Timing is Crucial: Deliver the correction (beep or vibration) immediately as your dog performs the unwanted behavior.
• Consistency: Everyone in the household should use the collar consistently and follow the same commands and correction methods.
• Positive Reinforcement: Always reward desired behaviors with praise, treats, or affection.
• Short Sessions: Keep training sessions short and positive, especially when introducing the collar.
• Common Uses:
  • Stopping Excessive Barking: Use a beep or low-level vibration when your dog barks unnecessarily.
  • Recall Training: Use a consistent command like "Come" followed by a beep or vibration if your dog doesn't respond.
  • Discouraging Jumping: A quick vibration can interrupt jumping behavior.
  • Preventing Chasing: Use the collar to interrupt your dog's focus on chasing vehicles or other animals.

Waterproof Feature

The receiver is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in various weather conditions and allows your dog to swim or play in water without damaging the device.

Image: A dog swimming in a pool while wearing the PaiPaitek collar, demonstrating its IPX7 waterproof capability.

Range Capability

The PaiPaitek Vibrating Dog Collar offers an impressive range of up to 3300 feet (approximately 1000 meters) in open areas. This extended range allows for effective training even when your dog is at a distance, such as in a large yard or park.

Image: A person using the remote control to interact with a dog from a distance, illustrating the 3300ft range capability.

Maintenance and Care

• Cleaning: Wipe the receiver and remote with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Collar Strap: The nylon collar strap can be hand-washed with mild soap and water. Ensure it is completely dry before reattaching the receiver.
• Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the batteries frequently. Charge them regularly, especially if storing the device for an extended period.

Troubleshooting

Specifications

Warranty and Support

PaiPaitek is committed to providing high-quality products. For any questions, concerns, or technical support regarding your vibrating dog collar, please contact PaiPaitek customer service. Refer to the product packaging or the official PaiPaitek website for the most current contact information.

Please retain your proof of purchase for any warranty claims.