Armor3 Wired Game Controller User Manual

Introduction

This manual provides essential information for the setup, operation, and maintenance of your Armor3 Wired Game Controller. Designed for use with PlayStation 4, PC, and Mac, this controller offers a responsive and immersive gaming experience.

Key features include a 6.5 ft. cable for flexible placement, intense vibration-feedback, motion sensing technology, an integrated light bar for enhanced immersion, a functional touchpad, and a front speaker. Please note that some functionalities, such as vibration-feedback and touchpad, may vary when used with PC and Mac. The controller does not include a headphone jack or an extension port.

Setup Guide

Follow these steps to connect your Armor3 Wired Game Controller to your device:

Unpack the Controller: Carefully remove the controller from its packaging.
Identify the USB Connector: Locate the standard USB-A connector at the end of the controller's 6.5 ft. cable.
Connect to Device:
- For PlayStation 4: Insert the USB connector into an available USB port on your PS4 console. The controller should be automatically recognized.
- For PC/Mac: Insert the USB connector into an available USB port on your computer. The necessary drivers should install automatically. If not, check your operating system's device manager.
Verify Connection: Once connected, the controller's light bar should illuminate, indicating a successful connection.

Armor3 Wired Game Controller with USB cable highlighted

Figure 1: The Armor3 Wired Game Controller showing its integrated USB cable, ready for connection. The image highlights the USB connector, the generous 6.5-foot cable length, and the ergonomic design for comfortable use.

Operating Instructions

The Armor3 Wired Game Controller provides a full range of controls for an immersive gaming experience. Familiarize yourself with the controller's layout and features:

Front view of Armor3 Wired Game Controller showing all buttons and features

Figure 2: A detailed front view of the Armor3 Wired Game Controller, displaying its various buttons, analog sticks, D-pad, touchpad, and light bar. This image helps in identifying the different control inputs.

Analog Sticks: Use the left and right analog sticks for precise movement and camera control.
Directional Pad (D-Pad): Provides directional input, commonly used for menu navigation or specific in-game actions.
Action Buttons: The standard PlayStation action buttons (Triangle, Circle, Cross, Square) are located on the right side for in-game commands.
SHARE Button: Allows you to share gameplay moments (PS4 specific functionality).
OPTIONS Button: Typically used to access in-game menus or pause the game.
Touchpad: The integrated touchpad offers additional input methods. Note: Touchpad functionality may vary significantly when used with PC and Mac.
Light Bar: The light bar changes color to provide visual feedback, such as player identification or in-game status.
Vibration Feedback: The controller provides immersive vibration feedback during gameplay. Note: Vibration functionality may vary when used with PC and Mac.
Front Speaker: Certain in-game audio cues may be played through the controller's integrated speaker.

For optimal performance, ensure your console or computer's operating system is up to date. Specific game settings may allow for customization of controller inputs.

Maintenance

Proper care and maintenance will extend the lifespan of your Armor3 Wired Game Controller:

Cleaning: Use a soft, dry cloth to wipe down the controller. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the controller's openings. Do not use harsh chemicals or abrasive cleaners.
Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cable.
Handling: Avoid dropping the controller or subjecting it to strong impacts, as this can damage internal components. Do not pull the cable excessively when disconnecting.

Troubleshooting

If you encounter issues with your Armor3 Wired Game Controller, please refer to the following common solutions:

Problem	Possible Cause / Solution
Controller not recognized by PS4/PC/Mac.	Ensure the USB cable is securely plugged into both the controller and the device. Try a different USB port on your console or computer. Restart your console or computer. For PC/Mac, check device manager for driver issues.
Vibration feedback not working (PC/Mac).	Vibration functionality may vary or be limited on PC and Mac depending on the game and operating system. Check in-game settings to ensure vibration is enabled. Ensure your PC/Mac drivers are up to date.
Touchpad not responding (PC/Mac).	Touchpad functionality is primarily designed for PS4 and may have limited or no support on PC and Mac. Some games or applications may offer specific touchpad support.
Buttons or analog sticks are unresponsive.	Ensure the controller is properly connected. Test the controller with another game or application to isolate the issue. Inspect for any physical damage or debris obstructing the buttons/sticks.

Specifications

Feature	Detail
Model Number	M07341-WH
Compatibility	PlayStation 4, PC, Mac (via USB)
Connectivity	Wired USB
Cable Length	6.5 ft.
Features	Vibration-feedback, Motion Sensing Technology, Light Bar, Touchpad, Front Speaker
Dimensions (Package)	6.93 x 4.57 x 3.5 inches
Item Weight	10.9 ounces
Manufacturer	Armor3

Warranty Information

Specific warranty terms and conditions for the Armor3 Wired Game Controller are provided by the manufacturer. Please refer to the documentation included with your purchase or visit the official Armor3 website for detailed warranty information and registration procedures.

Customer Support

For technical assistance, troubleshooting beyond this guide, or inquiries regarding your Armor3 Wired Game Controller, please contact Armor3 customer support. Contact details can typically be found on the product packaging or the manufacturer's official website.

Armor3 M07341-WH