1. Important Safety Instructions
Please read these instructions carefully before using the ProfiCare PC-WZD 3061 Electric Heated Blanket and retain them for future reference. Incorrect use can lead to hazards.
- Do not use the blanket if it is wet or damp.
- Ensure the control unit and power cord are not damaged before each use.
- Do not use the blanket folded, creased, or bunched up, as this can cause overheating.
- Do not insert pins or other sharp objects into the blanket.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance.
- Always unplug the blanket from the power outlet when not in use or before cleaning.
- The blanket features an integrated automatic shut-off and overheat protection system for enhanced safety.
2. Product Overview
The ProfiCare PC-WZD 3061 is an electric heated blanket designed for comfort and warmth. It features a soft, skin-friendly material and an intuitive control panel.

Figure 1: The ProfiCare PC-WZD 3061 Electric Heated Blanket, showcasing its soft texture and the attached control unit.
Components:
- Heated Blanket (approx. 130 x 180 cm)
- Detachable Control Unit with LED display
- Power Cord

Figure 2: Detailed view of the control unit, showing the LED display and buttons for power, timer, and temperature adjustment.
3. Setup
- Unpack: Carefully remove the heated blanket and its control unit from the packaging.
- Inspect: Check the blanket and control unit for any signs of damage. Do not use if damaged.
- Position: Lay the blanket flat on a bed, sofa, or other suitable surface. Ensure it is not folded, creased, or bunched up.
- Connect: Plug the control unit's connector firmly into the socket on the blanket.
- Power: Plug the power cord into a standard 220-240V, 50Hz electrical outlet.
4. Operating Instructions
The ProfiCare PC-WZD 3061 offers 10 temperature levels and a timer function for personalized comfort.

Figure 3: The control unit's LED display showing active timer and temperature settings, indicating the blanket's operational status.
- Power On/Off: Press the "ON/OFF" button to turn the blanket on or off. The LED display will illuminate when on.
- Adjust Temperature: Use the "Temp" button to cycle through the 10 available temperature levels. The current level will be shown on the LED display. Start with a lower setting and increase as needed. The blanket features rapid heating.
- Set Timer: Press the "Timer" button to set the automatic shut-off time. You can select a duration from 1 to 9 hours. The selected time will be displayed on the LED. After the set time, the blanket will automatically turn off.
- Safety Features: The blanket is equipped with an automatic shut-off function and overheat protection for your safety.

Figure 4: Illustrates the safety features of the blanket, including automatic shut-off and overheat protection, ensuring worry-free use.
5. Maintenance and Cleaning
Proper care ensures the longevity and hygiene of your heated blanket.

Figure 5: Demonstrates the detachable control unit, highlighting the ease of preparing the blanket for machine washing.
- Before Cleaning: Always unplug the blanket from the power outlet and detach the control unit from the blanket.
- Washing: The blanket is machine washable up to 40°C. Use a gentle cycle and mild detergent. Do not bleach.
- Drying: Do not tumble dry. Hang the blanket to air dry completely. Ensure it is thoroughly dry before reattaching the control unit and using it again.
- Storage: When not in use, store the blanket in a cool, dry place, preferably in its original packaging or a breathable bag. Do not place heavy objects on it.
- Control Unit: Clean the control unit with a dry or slightly damp cloth. Do not immerse it in water.
6. Troubleshooting
If you encounter issues with your ProfiCare PC-WZD 3061, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket does not heat up. | Not plugged in; control unit not connected properly; power outage; safety shut-off activated. | Ensure power cord is securely plugged into outlet. Check connection between control unit and blanket. Verify power supply. Turn off and on again to reset safety features. |
| Blanket heats unevenly. | Blanket is folded or bunched up. | Lay the blanket flat and smooth out any folds or creases. |
| Control unit display is off. | Blanket is off; power issue. | Press the "ON/OFF" button. Check power connection. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
- Model: PC-WZD 3061
- Brand: ProfiCare
- Dimensions: Approximately 130 x 180 cm
- Material: Soft, skin-friendly fabric (Polycarbonate)
- Power Supply: 220-240 V, 50 Hz
- Power Consumption: 180 W
- Temperature Levels: 10
- Timer: 1-9 hours automatic shut-off
- Safety Features: Automatic shut-off, Overheat protection
- Care: Machine washable up to 40°C (detachable control unit)
- Weight: 1.6 kg
- Color: Grey
8. Warranty and Support
ProfiCare products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ProfiCare website.
If you require technical assistance, have questions about your product, or need to report a fault, please contact ProfiCare customer support. Contact information can typically be found on the product packaging or the official brand website.
Note: Information regarding spare parts availability is currently unavailable.





