1. Introduction
Thank you for choosing the TRUSTECH SFH-181TP 2-in-1 Fan and Heater Combo. This appliance is designed to provide both cooling air circulation and supplemental heating for indoor spaces. Please read this manual thoroughly before operation to ensure safe and efficient use. Keep this manual for future reference.
Figure 1: TRUSTECH SFH-181TP 2-in-1 Fan and Heater Combo. This image shows the front view of the black unit with a visual representation of air circulating from it.
2. Important Safety Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this heater/fan.
- This heater/fan is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Always use the handle when moving this heater/fan.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater/fan and keep them away from the sides and rear.
- Extreme caution is necessary when any heater/fan is used by or near children or invalids and whenever the heater/fan is left operating and unattended.
- Always unplug heater/fan when not in use.
- Do not operate any heater/fan with a damaged cord or plug or after the heater/fan malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- This heater/fan is intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater/fan where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater/fan, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater/fan.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater/fan has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use this heater/fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heater/fan directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater/fan includes a Tip-Over Safety Switch which automatically shuts off the unit if it is accidentally tipped over.
- The unit also features Overheat Protection, which will automatically shut off the heater/fan if it reaches an unsafe temperature.
Figure 2: Tip-Over Protection. This image shows the unit being tipped by a cat, illustrating the automatic shut-off feature.
Figure 3: Overheat Protection. This image shows the unit with a visual indicator of the overheat protection feature, which activates if the internal temperature becomes too high.
3. Product Overview
The TRUSTECH SFH-181TP features a compact design with intuitive controls for both fan and heating functions.
Components:
- Control Knob: Located on the top, used to select operating modes and power levels.
- Air Outlet Grille: Front-facing grille for air distribution.
- Portable Handle: Integrated handle on the top for easy transport.
- Tilt Adjustment: Allows for manual adjustment of the unit's angle.
Figure 4: Control Panel and Features. This image provides a close-up of the control knob, the tip-over protection mechanism, and the integrated portable handle.
4. Setup
Follow these steps to set up your TRUSTECH SFH-181TP:
- Placement: Place the unit on a firm, level surface. Ensure there are no obstructions within 3 feet (0.9 m) of the front, sides, and rear of the appliance.
- Power Connection: Plug the power cord directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.
- Initial Inspection: Before first use, inspect the unit for any signs of damage. If damaged, do not operate and contact customer support.
Figure 5: Versatile Placement. This image shows the compact unit placed on a bedside table, a desk, and the floor, demonstrating its suitability for various indoor environments.
5. Operating Instructions
The control knob on the top of the unit allows you to select different operating modes and power levels.
Control Knob Settings:
- OFF: Turns the unit off.
- FAN LO: Activates the fan in low-speed mode for cooling air circulation.
- FAN HI: Activates the fan in high-speed mode for stronger cooling air circulation.
- HEAT LO (750W): Activates the heater in low-heat mode (750 Watts) for gentle warming.
- HEAT HI (1500W): Activates the heater in high-heat mode (1500 Watts) for rapid and powerful warming.
Tilt Adjustment:
The unit features a 0° to 45° adjustable tilt angle. Gently push or pull the top of the unit to adjust the airflow direction to your desired angle. This allows for direct personal heating/cooling or broader air circulation.
Figure 6: 45° Variable Angle. This image illustrates the adjustable tilt feature, showing the unit positioned for both desktop and floor use to direct airflow.
Figure 7: Air Circulation. This diagram shows how the 45-degree tilt helps circulate air throughout a room, balancing temperature.
Figure 8: Mode Selection. This image displays the unit operating in 750W warming mode, 1500W warming mode, and fan mode, suitable for various seasonal needs.
6. Maintenance and Cleaning
Regular cleaning and maintenance will help ensure the longevity and efficient operation of your unit.
- Always unplug the unit before cleaning or performing any maintenance.
- Exterior Cleaning: Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Air Inlet/Outlet: Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the air inlet and outlet grilles. Ensure these areas remain clear for proper airflow.
- Storage: If storing the unit for an extended period, clean it thoroughly and store it in a cool, dry place, preferably in its original packaging.
7. Troubleshooting
If you experience issues with your TRUSTECH SFH-181TP, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power to the unit; Unit is tipped over; Overheat protection activated. | Ensure the power cord is securely plugged into a working outlet. Check if the unit is on a stable, level surface. Allow the unit to cool down for 30 minutes if overheat protection was triggered. |
| No heat output in heater mode. | Overheat protection activated; Incorrect mode selected. | Allow the unit to cool down. Ensure the control knob is set to HEAT LO or HEAT HI. |
| Fan does not operate. | Incorrect mode selected; Unit is tipped over. | Ensure the control knob is set to FAN LO or FAN HI. Check if the unit is on a stable, level surface. |
| Reduced airflow. | Air inlets/outlets are blocked by dust or debris. | Unplug the unit and clean the air inlets and outlets as described in the Maintenance section. |
If the problem persists after attempting these solutions, please contact TRUSTECH customer support.
8. Specifications
- Brand: TRUSTECH
- Model: SFH-181TP
- Product Dimensions: 9.6"D x 10.8"W x 6"H
- Item Weight: 3.72 pounds
- Heat Output: 750W / 1500W
- Voltage: 120 Volts
- Amperage: 12.5 Amps
- Number of Speeds: 2 (Fan), 2 (Heat)
- Special Features: 45° Tilt, Tip-Over Protection, Overheat Protection
- Indoor/Outdoor Usage: Indoor
9. Warranty and Support
The TRUSTECH SFH-181TP comes with a 1-year warranty, plus an additional 1-year extended warranty. For warranty claims, technical support, or any questions regarding your product, please contact TRUSTECH customer service.
For further assistance, please visit the official TRUSTECH store: TRUSTECH Store on Amazon
