Unicook Offset Smoker Cover (Model B63-018) Instruction Manual

1. Introduction

Thank you for choosing the Unicook Offset Smoker Cover, Model B63-018. This manual provides essential information for the proper use, installation, and maintenance of your new smoker cover. Please read these instructions carefully to ensure optimal protection and longevity for your outdoor cooking equipment.

2. Product Overview

The Unicook Offset Smoker Cover is designed to protect your charcoal BBQ grill from various outdoor elements. Constructed from heavy-duty, fade-resistant fabric with a waterproof vinyl coating, it offers all-year-round protection against rain, UV rays, tears, and cold cracking. Integrated wind-resistant straps ensure the cover remains securely in place.

Image 2.1: The Unicook Offset Smoker Cover installed on an outdoor grill.

3. Dimensions and Compatibility

This cover measures 60 inches (W) x 28 inches (D) x 38.5 inches (H), with a smokestack accommodation of 5.5 inches (Dia) x 10.25 inches (H). It is compatible with many offset smokers and charcoal grills, including models from Brinkmann, Char-Broil, Royal Gourmet, Silver Smoker, Black Diamond Smoker, and New Braunfels. To ensure a proper fit, please measure your smoker's overall dimensions before purchasing.

Image 3.1: Detailed dimensions of the Unicook Offset Smoker Cover.

4. Material and Durability

The cover is crafted from a new generation special fade-resistant fabric, engineered to maintain its color and integrity over time. This material is combined with a waterproof vinyl coating on the interior, providing a robust barrier against moisture. The fabric is designed to be 4 times thicker than standard covers, enhancing its durability and resistance to wear and tear.

Image 4.1: Comparison illustrating the fade resistance of Unicook material.

Image 4.2: Detail of the anti-UV and water-repellent coating with waterproof vinyl backing.

Image 4.3: Visual comparison demonstrating the increased thickness and durability of the Unicook cover.

5. Installation and Securement

To install the cover:

1. Ensure your smoker is completely cool before covering to prevent damage to the cover material.
2. Carefully place the cover over your smoker, aligning the smokestack opening with your smoker's chimney.
3. Adjust the cover to fit snugly over the entire smoker.
4. Utilize the integrated fastening straps located on the sides of the cover. Securely fasten these straps to prevent the cover from being dislodged by wind.

Image 5.1: Detail of the windproof fastening straps for secure installation.

6. Care and Maintenance

Proper care will extend the life of your Unicook Smoker Cover:

• Cleaning: To clean, simply hose the cover with water. Dirt and debris will wash away easily.
• Drying: Allow the cover to air dry completely in the sun before storing or reinstalling.
• Important: Do not machine wash the cover, as this can damage the waterproof coating and fabric integrity.
• Storage: When not in use, store the cover in a dry, shaded area to further prolong its lifespan.

7. Important Safety Information

Please observe the following safety guidelines:

• Always allow the grill to cool completely before covering to prevent damage to the product and potential fire hazards.
• In case of rain or spills, wipe off excess water from the cover and allow it to dry naturally to prevent mildew and maintain material quality.
• Use the heavy-duty fastening straps to secure the cover, especially in windy conditions, to prevent it from blowing off and causing injury or damage.

8. Specifications

9. Warranty and Support

Unicook products are designed for durability and performance. For any questions regarding your Unicook Offset Smoker Cover, or for assistance with product issues, please contact Unicook customer support through the retailer where the product was purchased or visit the official Unicook website for contact information. Please retain your proof of purchase for warranty claims.