Spigen Glas.tR EZ Fit Tempered Glass Screen Protector for iPhone 12 and iPhone 12 Pro Instruction Manual

Introduction

This manual provides detailed instructions for the installation, use, and maintenance of your Spigen Glas.tR EZ Fit Tempered Glass Screen Protector. Designed for the iPhone 12 and iPhone 12 Pro, this screen protector offers 9H hardness for protection against scratches and an oleophobic coating to resist fingerprints. Please read these instructions carefully before installation to ensure optimal performance and longevity of your screen protector.

What's in the Box

Each Spigen Glas.tR EZ Fit package contains the following components:

• Screen protector (2 units)
• Wet Wipe (2 units)
• Dry Wipe (2 units)
• Micro Fiber Cloth (2 units)
• Dust Removal Sticker (2 units)
• Installation Tray (2 units, pre-attached to screen protectors)

Image: Contents of the Spigen Glas.tR EZ Fit package.

Compatibility

The Spigen Glas.tR EZ Fit Tempered Glass Screen Protector is specifically designed for the following models:

• iPhone 12 (6.1-inch display)
• iPhone 12 Pro (6.1-inch display)

This product is not compatible with iPhone 12 Pro Max (6.7-inch) or iPhone 12 mini (5.4-inch) models. Please verify your device model before installation.

Image: Device compatibility for the screen protector.

Setup and Installation

The Spigen Glas.tR EZ Fit features an auto-alignment installation tray for a precise and bubble-free application. Follow these steps carefully:

Preparation:

1. Clean your workspace: Ensure you are in a dust-free environment. Wash your hands thoroughly.
2. Power off your device: Turn off your iPhone 12 or 12 Pro.
3. Clean the screen:
   • Use the Wet Wipe to thoroughly clean the entire screen surface, removing all oils, smudges, and dirt.
   • Immediately follow with the Dry Wipe to dry the screen completely.
   • Use the Micro Fiber Cloth to polish the screen and remove any remaining lint or streaks.
   • Finally, use the Dust Removal Sticker to dab the screen and pick up any microscopic dust particles. Ensure the screen is perfectly clean before proceeding.

Installation Steps:

4. Position the installation tray: Take one screen protector with its pre-attached installation tray. Align the tray over your iPhone, ensuring the top and bottom are correctly oriented. The tray is designed to fit snugly over your phone.
5. Remove the protective film: While holding the tray firmly, peel off the protective film from the adhesive side of the screen protector. Be careful not to touch the adhesive surface.
6. Lower the screen protector: Gently lower the screen protector onto your phone's screen using the alignment tray. The EZ Fit tray will automatically guide the screen protector into the correct position.
7. Apply pressure: Once the screen protector is in place, press firmly along the center of the screen protector to initiate adhesion. You may see the adhesive spread across the screen.
8. Remove the tray: Carefully lift and remove the installation tray from your phone.
9. Finalize adhesion: Use the Micro Fiber Cloth to gently press out any remaining small bubbles towards the edges of the screen. Most bubbles should disappear within 24-48 hours.

Operating and Usage

Once installed, your Spigen Glas.tR EZ Fit screen protector provides robust protection while maintaining the original touch experience and display clarity of your iPhone.

• 9H Hardness: The tempered glass is rated at 9H hardness, offering superior resistance against scratches from keys, coins, and other sharp objects in daily use.
• Crystal Clarity: Enjoy your iPhone's display with uncompromised visual quality and touch sensitivity.
• Oleophobic Coating: The special coating helps reduce fingerprints and smudges, making the screen easier to clean.
• Case Friendly Design: The screen protector is designed to be compatible with most phone cases, including Spigen cases, ensuring a seamless fit without lifting at the edges.

Image: Screen protector keeping the phone screen protected.

Image: Crystal clear display with the screen protector.

Image: Screen protector designed for a flawless fit with Spigen cases.

Maintenance

To keep your Spigen Glas.tR EZ Fit screen protector clean and clear:

• Wipe the screen regularly with a soft, lint-free cloth, such as the included Micro Fiber Cloth.
• For stubborn smudges or fingerprints, lightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
• The oleophobic coating helps repel oils, making cleaning easier and reducing the frequency of cleaning needed.

Troubleshooting

Here are solutions to common issues you might encounter:

• Bubbles after installation:
  • Small bubbles: Many small bubbles will naturally disappear within 24-48 hours as the adhesive fully cures. Gently push larger bubbles towards the nearest edge with the microfiber cloth.
  • Dust-induced bubbles: If a bubble persists and appears to have a dust particle underneath, it may be difficult to remove without lifting the protector. If you have a second protector, consider re-installing after ensuring a completely dust-free screen.
• Misalignment: The EZ Fit tray is designed for precise alignment. If misalignment occurs, it is usually due to not properly seating the phone in the tray or not pressing down evenly during application. If significantly misaligned, you may need to use the second screen protector.
• Edges not adhering: Ensure the screen was thoroughly cleaned and free of dust or oils, especially along the edges. Press firmly along the edges with the microfiber cloth. If the issue persists, it might be due to a case pushing against the protector; ensure your case is compatible.

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the official Spigen website or contact Spigen customer service directly. Details can typically be found on the product packaging or the manufacturer's official online channels.