1. Product Overview
The Optonica 20W LED Floodlight is a versatile and energy-efficient lighting solution designed for both indoor and outdoor applications. With an IP65 waterproof rating, it is protected against dust and water jets, making it suitable for various environments. This floodlight provides a bright 1600 lumens of daylight white light (6000K) while consuming only 20 watts, equivalent to a 100-watt traditional light source. It features a durable aluminum construction and a long operational lifespan, backed by a 3-year warranty.
Typical applications include illuminating garage entrances, pathways, building facades, architectural features, and large indoor spaces.
2. Safety Instructions
- Always disconnect power before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Ensure the mounting surface is capable of supporting the weight of the floodlight.
- Do not look directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
- Keep the product away from flammable materials.
- Ensure all electrical connections are secure and properly insulated to prevent electric shock.
3. Setup and Installation
3.1 Package Contents
- 1x Optonica 20W LED Floodlight
- 1x U-shaped mounting bracket (pre-attached)
3.2 Mounting the Floodlight
- Choose a suitable mounting location (wall, ceiling, or other stable surface) that can support the floodlight's weight and provide adequate illumination.
- Using the pre-attached U-shaped mounting bracket as a template, mark the drilling points on the desired surface.
- Drill appropriate holes and insert suitable anchors (not included, depending on surface material).
- Securely fasten the mounting bracket to the surface using screws (not included).
- Adjust the angle of the floodlight as needed by loosening the screws on the sides of the bracket, tilting the light, and then tightening the screws firmly.
Figure 1: Rear view of the floodlight with mounting bracket and wiring.
3.3 Electrical Connection
The floodlight comes with a 25cm electrical cable. Ensure the power supply is turned OFF at the circuit breaker before proceeding with wiring.
- Connect the floodlight's electrical cable to your main power supply. Standard wiring colors are typically:
- Brown (Live/Phase)
- Blue (Neutral)
- Green/Yellow (Earth/Ground)
Note: Always consult local electrical regulations and ensure proper grounding for safety.
- Use appropriate waterproof connectors and junction boxes for outdoor installations to maintain the IP65 rating.
- Once connections are secure, restore power to test the floodlight.
4. Operating Instructions
The Optonica 20W LED Floodlight is designed for immediate illumination upon receiving power. There are no complex controls; simply connect it to a power source, and it will light up.
- Power On/Off: Control the floodlight using an external switch connected to its power supply.
- Light Output: Provides 1600 lumens of 6000K daylight white light with a wide 120° beam angle for broad coverage.
- Versatile Use: Suitable for continuous illumination in areas requiring bright, efficient lighting, such as security lighting, accent lighting, or general area lighting.
Figure 2: Front view of the Optonica LED Floodlight.
5. Maintenance
The Optonica LED Floodlight requires minimal maintenance due to its durable construction and long-life LED technology.
- Cleaning: Periodically clean the floodlight's surface and glass cover with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
- Inspection: Regularly inspect the electrical cable and connections for any signs of wear, damage, or corrosion. Address any issues promptly to ensure safe operation.
- No User-Serviceable Parts: The LED module is integrated and not designed for user replacement. Do not attempt to open the floodlight housing.
6. Troubleshooting
If the floodlight is not functioning as expected, perform the following basic checks:
- No Light:
- Check if the power supply is active.
- Verify that the external switch (if any) is in the "ON" position.
- Inspect all electrical connections for looseness or damage (ensure power is OFF before inspection).
- Check the circuit breaker for the connected circuit.
- Flickering Light:
- Ensure all electrical connections are secure.
- Check for stable power supply.
If the problem persists after performing these checks, contact customer support or a qualified electrician.
7. Specifications
| Brand | Optonica |
| Model Number | 3800156659032 |
| Power Consumption | 20W (100W equivalent) |
| Luminous Flux | 1600 lumens |
| Color Temperature | 6000K (Daylight White) |
| Beam Angle | 120° |
| IP Rating | IP65 (Waterproof and Dust-tight) |
| Material | Aluminum |
| Dimensions (L x W x H) | 142 x 130 x 24 mm |
| Cable Length | 25 cm |
| Installation Type | Surface Mount (U-bracket included) |
| Usage Environment | Indoor / Outdoor |
8. Warranty and Support
The Optonica 20W LED Floodlight is covered by a 3-year warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or any questions regarding your product, please contact your retailer or Optonica customer service through their official website or contact channels.
