Introduction
Thank you for choosing the Giantex 3-Piece Pub Dining Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before assembly and retain them for future reference.
Important Safety Information
- Stability: Non-slip pads are provided for stability, but ensure the table is placed on a flat, even surface to prevent tipping.
- Weight Capacity: Do not exceed the weight capacity of 100 lbs for the table and 300 lbs for each stool. Overloading can cause damage or injury.
- Assembly: Assembly is required. Keep small parts out of reach of children during and after assembly to prevent choking hazards.
- Tools: Use appropriate tools for assembly. Do not overtighten screws, as this may damage the material.
- Regular Checks: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary.
Setup and Assembly
Your Giantex Pub Dining Set requires assembly. Detailed, easy-to-follow instructions are included with the product packaging. Please ensure all components are present before beginning assembly.
Components Overview
- 1 x Counter Height Pub Table
- 2 x Saddle Bar Stools
- Hardware pack (screws, bolts, non-slip pads)
General Assembly Steps
- Unpack all components and verify against the parts list in your included manual.
- Begin by assembling the table frame, attaching the legs to the tabletop using the provided hardware.
- Secure the crossbars between the table legs for enhanced stability.
- Assemble the stools by attaching the legs to the saddle seat and securing the 4-sided footrests.
- Attach the non-slip pads to the bottom of all table and stool legs.
- Ensure all connections are tight and secure before use.
Figure 1: Key structural features including enhanced crossbar and non-slip pads.
Figure 2: Detail of the stool's curved surface and integrated footrest for comfort.
Operating Instructions
This pub dining set is designed for versatile use in various living spaces, including kitchens, dining rooms, and small apartments.
Space-Saving Design
The stools are designed to be conveniently hung under the table top using the integrated slid-in rails. This feature maximizes space utilization when the set is not in use, making it ideal for smaller areas.
Figure 3: Stools stored under the table to save space.
Comfortable Seating
Each stool features a specially curved surface designed to fit comfortably, distributing pressure evenly. The 4-sided footrest provides additional support, allowing for comfortable seating even during extended periods.
Figure 4: The pub dining set in a typical usage scenario.
Maintenance and Care
Proper care will extend the life and maintain the appearance of your dining set.
- Cleaning: Wipe surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Spills: Clean spills immediately to prevent staining, especially on the wood surfaces.
- Protection: Avoid placing hot items directly on the tabletop. Use coasters or placemats to protect the surface from heat and moisture.
- Sunlight: Keep the furniture away from direct sunlight and heat sources to prevent fading and warping of the wood.
Troubleshooting
If you encounter any issues with your pub dining set, please refer to the following common solutions:
- Wobbling Table/Stools: Ensure all bolts and screws are securely tightened. Check that the furniture is placed on a level surface. Adjust non-slip pads if necessary.
- Missing Hardware: If any hardware is missing upon unboxing, please contact Giantex customer service for assistance. Do not attempt to substitute with incorrect parts.
- Difficulty during Assembly: Review the assembly instructions carefully. If a part does not fit, do not force it. Contact customer service for guidance.
For issues not covered here, please contact Giantex customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | GX65218-WH |
| Brand | Giantex |
| Color | Brown & Milky White |
| Material | Engineered Wood, Rubber Wood, MDF |
| Pub Table Dimensions (L x W x H) | 36" x 26" x 36.5" |
| Stool Dimensions (L x W x H) | 13" x 13" x 24.5" |
| Item Weight | 66 pounds |
| Table Weight Capacity | 100 lbs |
| Stool Weight Capacity | 300 lbs (each) |
| Product Care | Wipe with Dry Cloth |
Figure 5: Detailed dimensions of the Giantex Pub Dining Set.
Warranty Information
Giantex products are manufactured to high-quality standards. For specific warranty details regarding your 3-Piece Pub Dining Set, please refer to the warranty card included with your purchase or visit the official Giantex website. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Giantex customer service. You can typically find contact information on the Giantex website or through your retailer's support channels.
Online Support: Visit the Giantex Store on Amazon
