1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your TEHOME Matt Black Pivot Rectangle Bathroom Vanity Mirror. Please read these instructions thoroughly before beginning installation to ensure proper setup and safe use of the product.
Figure 1: TEHOME Matt Black Pivot Rectangle Bathroom Vanity Mirror (Overall View)
2. Safety Information
This mirror should be installed securely to the wall to prevent accidental falls, which could cause injury or damage. Handle with care to avoid breakage, as shattered glass may pose a risk. The edges of the mirror may be sharp; exercise caution when handling. For best results, follow the provided mounting instructions and use appropriate hardware. This product is not intended for use in areas where it may be exposed to excessive moisture or temperature fluctuations, which could affect its longevity and safety.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x TEHOME Matt Black Pivot Rectangle Bathroom Vanity Mirror
- 2 x Adjustable Wall Brackets (Premium quality zinc alloy material)
- Mounting Hardware (screws and anchors)
- Installation Instructions
4. Specifications
| Feature | Detail |
|---|---|
| Brand | TEHOME |
| Model | B08DLQ57D4 |
| Overall Dimensions (with brackets) | 26.91" wide x 3" deep x 35" high |
| Mirror Dimensions (excluding brackets) | 23" wide x 35" high |
| Frame Material | Metal |
| Color | Matt Black |
| Shape | Rectangular |
| Mounting Type | Wall Mounted |
| Additional Features | Adjustable, Beveled |
| Item Weight | 18.7 Pounds |
Figure 2: Detailed Dimensions
5. Setup and Installation
5.1 Tools Required (Not Included)
- Pencil
- Measuring Tape
- Level
- Drill
- Screwdriver
5.2 Installation Steps
- Prepare the Wall: Choose the desired location for your mirror. Ensure the wall surface is clean and dry.
- Mark Mounting Points: Use the provided paper template (if included) or measure carefully to mark the positions for the wall brackets. Ensure the marks are level and spaced correctly for the mirror.
- Drill Pilot Holes: Using a drill, create pilot holes at the marked locations. If installing into drywall, insert the provided wall anchors.
- Attach Wall Brackets: Secure the adjustable wall brackets to the wall using the provided screws. Ensure they are firmly attached and level.
- Mount the Mirror: Carefully align the mirror's pivot points with the installed wall brackets. Insert the mirror into the brackets, ensuring it is securely seated.
- Adjust and Tighten: Once the mirror is in place, adjust the pivot grommets on the brackets to achieve the desired tilt and tighten them to secure the mirror's position.
Figure 3: Pivot Mechanism and Wall Bracket Detail
6. Operation
The TEHOME Pivot Rectangle Bathroom Vanity Mirror features a tiltable design, allowing you to adjust the viewing angle. Gently grasp the top or bottom edge of the mirror and tilt it up or down to your preferred angle. The adjustable wall brackets are designed to hold the mirror securely in place once adjusted, accommodating both standing and seated use.
Figure 4: Mirror in a Bathroom Setting
7. Maintenance
To maintain the clarity and appearance of your mirror, follow these guidelines:
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping behind the edges. Wipe gently until clean and streak-free.
- Cleaning the Frame: Wipe the metal frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish. Dry immediately with a clean, soft cloth.
- Regular Inspection: Periodically check the wall brackets and mounting hardware to ensure they remain secure. Tighten any loose screws as needed.
8. Troubleshooting
- Mirror is loose or wobbles: Ensure all mounting screws and pivot grommets are securely tightened. Re-check the wall anchors for proper installation.
- Mirror does not tilt smoothly: Check for any obstructions around the pivot points. Ensure the pivot grommets are not overtightened, which could restrict movement.
- Streaks after cleaning: Use a clean, lint-free microfiber cloth and a high-quality glass cleaner. Avoid using excessive cleaner.
9. Warranty and Support
Customers are eligible for hardware replacement if this mirror arrives missing, defective, or with damaged brackets. TEHOME offers a 100% satisfaction guarantee. For further assistance or to request replacement parts, please contact TEHOME customer support through your purchase platform or the official TEHOME website.