Aerocool Mirage 12 ARGB PC Fan Instruction Manual

1. Introduction

Thank you for choosing the Aerocool Mirage 12 ARGB PC Fan. This manual provides detailed instructions for the installation, operation, and maintenance of your new fan. The Mirage 12 ARGB fan features an Infinity Mirror RGB design and is compatible with Addressable RGB motherboards for customizable lighting effects. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Safety Information

• Ensure your computer system is powered off and disconnected from the main power supply before installation.
• Handle components with care to avoid damage.
• Do not attempt to modify the fan or its connectors.
• Keep out of reach of children.
• Refer to your motherboard manual for specific ARGB header and fan header locations and voltage requirements.

3. Package Contents

The Aerocool Mirage 12 ARGB PC Fan package includes the following items:

• 1 x Aerocool Mirage 12 ARGB PC Fan (120mm)
• Mounting Screws

Image 1: Front view of the Aerocool Mirage 12 ARGB PC Fan, showcasing its infinity mirror RGB lighting effect.

4. Installation Guide

4.1 Physical Installation

1. Identify the desired mounting location within your PC case (e.g., front, rear, top, bottom).
2. Position the fan in the chosen location, ensuring proper airflow direction (typically, the side with the frame supports and sticker is the exhaust side).
3. Secure the fan to the case using the provided mounting screws. Do not overtighten.

Image 2: Back view of the Aerocool Mirage 12 ARGB PC Fan, illustrating the fan blade structure and motor hub.

4.2 Electrical Connection

1. Locate the 6-pin connector on the fan cable.
2. Connect the 6-pin connector to a compatible Aerocool H66F RGB Control Hub (if available) or a similar Addressable RGB controller that supports 6-pin fan connections.
3. If using an H66F RGB Control Hub, connect the hub to your motherboard's 4-pin PWM fan header for fan speed control and a 3-pin 5V Addressable RGB header for lighting control. Refer to the H66F hub manual for detailed instructions.
4. Ensure all connections are secure before powering on your system.

Image 3: Close-up view of the 6-pin connector, used for both power and ARGB signal transmission.

5. Operation

5.1 ARGB Lighting Control

The Aerocool Mirage 12 ARGB fan's lighting can be controlled via a compatible Addressable RGB motherboard or an external ARGB controller (e.g., Aerocool H66F RGB Control Hub).

• Motherboard Software: If connected to a 3-pin 5V ARGB header on your motherboard, use the motherboard's proprietary software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to customize lighting effects, colors, and patterns.
• External Controller: If connected to an external ARGB controller, refer to the controller's manual for instructions on how to adjust lighting settings.

5.2 Fan Speed Control

The fan speed is controlled via the 6-pin connector, which typically interfaces with a PWM-compatible fan header on your motherboard (often through a control hub like the H66F). You can adjust fan speeds through your motherboard's BIOS/UEFI settings or dedicated fan control software.

• Ensure your motherboard's 4-pin fan header is PWM compatible for optimal speed control.
• Adjust fan curves in your motherboard's BIOS/UEFI or operating system software to balance cooling performance and noise levels.

6. Maintenance

To ensure optimal performance and longevity of your Aerocool Mirage 12 ARGB PC Fan, periodic cleaning is recommended.

• Power Off: Always power off your computer and disconnect it from the power supply before cleaning.
• Dust Removal: Use compressed air or a soft, dry cloth to gently remove dust accumulation from the fan blades and frame.
• Avoid Liquids: Do not use liquid cleaners or immerse the fan in water.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official AeroCool website or contact your local retailer. Keep your proof of purchase for warranty claims.

AeroCool Official Website: www.aerocool.io