Introduction
This manual provides essential information for the safe and effective use of the Fafeicy Water Pressure Sensor, model electronic-pressure-sensors. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the device. This sensor is designed for industrial applications requiring precise water pressure measurement.
Safety Information
- Electrical Safety: Ensure all power is disconnected before installation or maintenance. Incorrect wiring can lead to electric shock or damage to the sensor.
- Pressure Safety: Do not exceed the specified overload pressure (2 times full range pressure) or blasting pressure (3 times full range pressure). Exceeding these limits can cause sensor failure and potential injury.
- Environmental Conditions: The sensor is rated IP65 for protection against dust and low-pressure water jets. Avoid submerging the sensor or exposing it to high-pressure water jets. Operate within the specified temperature ranges.
- Installation: Installation should be performed by qualified personnel familiar with industrial pressure sensing equipment and electrical systems.
Product Overview
The Fafeicy Water Pressure Sensor is a robust and accurate device designed for reliable pressure measurement in various industrial environments. Its compact design and durable construction ensure stable performance over time.
Key Features:
- EMC Compliance: The product has passed EMC testing, ensuring stable operation in electromagnetic environments.
- High Stability: Features stable product performance with small long-term drift, contributing to a long operational life.
- Durable Construction: The outer shell is made of stainless steel, housing an advanced ceramic core and a customized process chip for enhanced reliability.
- Accuracy and Ease of Use: Offers high accuracy, small size, light weight, and is designed for easy installation and use.
- IP65 Protection: Provides protection against dust ingress and low-pressure water jets.
Figure 1: Fafeicy Water Pressure Sensor. This image shows the main body of the sensor, its G3/8 threaded connection, and the attached three-wire cable for electrical connection.
Specifications
| Parameter | Value |
|---|---|
| Model Number | electronic-pressure-sensors |
| Level of Protection | IP65 |
| Input Voltage | 5±0.25VDC / 5~32VDC |
| Technology | Piezoresistance |
| Screw Connection | G3/8 |
| Output Type | Analog |
| Measuring Range | 0-2 BAR (for this specific model) |
| Output Pattern | Three-wire |
| Overload Pressure | 2 Times Full Range Pressure |
| Blasting Pressure | 3 Times Full Range Pressure |
| Comprehensive Accuracy (0 ~ 80 ℃) | ± 1% FS |
| Comprehensive Accuracy (-20 ~ 100 ℃) | ± 1.5% FS |
| Comprehensive Accuracy (-40 ~ 125 ℃) | ± 3% FS |
| Electrical Connection | Packard Connector (Three-core) |
| Item Weight | 3.52 ounces |
Setup
Proper setup is crucial for accurate readings and safe operation. Follow these steps carefully:
- Preparation: Ensure the system where the sensor will be installed is depressurized and drained. Gather necessary tools, including a wrench for the G3/8 connection and appropriate wiring tools.
- Mounting:
Figure 2: G3/8 Screw Connection. This image highlights the G3/8 threaded connection point of the sensor, which is used for mechanical installation into the pressure system.
Screw the sensor into the designated G3/8 port on your system. Use a wrench to tighten it securely, but do not overtighten to avoid damaging the threads or the sensor. Ensure a proper seal to prevent leaks.
- Electrical Connection:
Figure 3: Three-wire Electrical Cable. This image displays the three-core cable extending from the sensor, indicating the electrical connection points for power and signal output.
Connect the three-core Packard connector to your control system. Refer to the wiring diagram provided with your system for specific connections. Typically, these wires are for power supply (positive and negative) and analog signal output. Ensure correct polarity and secure connections.
- Power On: Once all connections are secure, slowly re-pressurize the system and apply power to the sensor. Monitor for any leaks or abnormal readings.
Operating
The Fafeicy Water Pressure Sensor provides a continuous analog output signal corresponding to the measured pressure. This signal can be integrated into various industrial control systems for monitoring and automation.
- Monitoring: The sensor's analog output can be read by a PLC, data logger, or other compatible device to display real-time pressure values.
- Range: The sensor measures pressure within the 0-2 BAR range. Ensure your monitoring equipment is calibrated to interpret this range correctly.
- Environmental Considerations: While IP65 rated, avoid exposing the sensor to extreme vibrations or sudden temperature changes outside its specified operating range (-40 ℃ to 125 ℃ for accuracy considerations).
Maintenance
The Fafeicy Water Pressure Sensor is designed for low maintenance. However, periodic checks can help ensure continued accuracy and reliability.
- Visual Inspection: Regularly inspect the sensor body and cable for any signs of physical damage, corrosion, or wear.
- Connection Check: Verify that the G3/8 screw connection and electrical connections remain tight and free from leaks or corrosion.
- Cleaning: If necessary, gently clean the exterior of the sensor with a damp cloth. Do not use abrasive cleaners or solvents. Ensure no water enters the electrical connection points.
- Recalibration: Depending on the application and industry standards, periodic recalibration may be required to maintain specified accuracy. Consult a qualified technician for recalibration services.
Troubleshooting
If you encounter issues with your Fafeicy Water Pressure Sensor, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No output signal or incorrect reading |
|
|
| Inaccurate readings |
|
|
| Leakage at connection point |
|
|
If the problem persists after attempting these solutions, please contact Fafeicy customer support.
Warranty Information
Fafeicy products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage resulting from improper installation, misuse, unauthorized modification, accident, or operation outside the specified environmental and electrical parameters.
Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fafeicy customer support through the retailer where the product was purchased or visit the official Fafeicy website for contact information.
Online Resources: For additional product information and updates, please visit the Fafeicy Store on Amazon.