GHB Baby Monitor User Manual

1. Introduction

Thank you for purchasing the GHB Baby Monitor. This device is designed to provide reliable and clear monitoring of your baby, ensuring peace of mind. Featuring a 2.4-inch LCD screen, 2.4 GHz wireless technology, two-way communication, night vision, and temperature sensing, this monitor offers essential functionalities for modern parenting. Please read this manual carefully before use to ensure proper operation and maintenance.

Figure 1: GHB Baby Monitor (Monitor and Camera Unit)

2. Safety Information

• Keep the monitor and camera units out of reach of children.
• Do not place the camera or cords within 3 feet (1 meter) of the crib or playpen to avoid strangulation hazards.
• Use only the provided power adapters. Using unauthorized adapters may damage the device and void the warranty.
• Do not expose the device to water, moisture, or extreme temperatures.
• Avoid placing the device near heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
• Clean the device with a dry, soft cloth. Do not use liquid or aerosol cleaners.
• This product is not a substitute for responsible adult supervision.

3. Package Contents

The GHB Baby Monitor package includes the following items:

• 1 x Baby Monitor (Parent Unit)
• 1 x Baby Camera (Baby Unit)
• 2 x Power Adapters (one for each unit)
• 1 x User Manual

Figure 2: Package Contents

4. Product Overview

4.1 Parent Unit (Monitor)

The parent unit features a 2.4-inch LCD screen for clear video display and intuitive controls for various functions.

• LCD Screen: Displays live video feed from the camera.
• Power Button: Turns the unit on/off.
• Menu Button: Accesses settings and options.
• Navigation Buttons (Up/Down/Left/Right/OK): For menu navigation and digital zoom control.
• Talk Button: Activates two-way audio communication.
• Lullaby Button: Plays built-in lullabies.
• Volume Buttons: Adjusts audio volume.
• Antenna: For wireless signal reception.
• Charging Port: For connecting the power adapter.

4.2 Baby Unit (Camera)

The baby unit is equipped with a camera, microphone, speaker, and infrared LEDs for night vision.

• Camera Lens: Captures video of the baby.
• Infrared LEDs: Provide illumination for night vision.
• Microphone: Picks up sounds from the baby's room.
• Speaker: Outputs audio from the parent unit (two-way talk) and lullabies.
• Temperature Sensor: Monitors the room temperature.
• Power Port: For connecting the power adapter.
• Pairing Button: Used for initial pairing or re-pairing with the parent unit.

Figure 3: Monitor and Camera Unit Details

5. Setup

5.1 Charging the Parent Unit

1. Connect one power adapter to the charging port on the parent unit.
2. Plug the other end into a power outlet.
3. The battery indicator on the screen will show charging status. A full charge takes approximately 3-4 hours.
4. The parent unit has a built-in 950 mAh battery, providing up to 12 hours of use in ECO mode or 8 hours in normal mode.

5.2 Powering the Baby Unit

1. Connect the second power adapter to the power port on the baby unit.
2. Plug the other end into a power outlet. The baby unit must remain plugged in for continuous operation.

5.3 Positioning the Baby Unit (Camera)

Place the baby unit in a location that provides a clear view of your baby in the crib or play area. Ensure it is at least 3 feet (1 meter) away from the baby to prevent any cord hazards. The camera can be placed on a flat surface, mounted on a wall, or attached to a crib using compatible accessories (not included).

Figure 4: Flexible Camera Placement Options

5.4 Initial Connection

The parent unit and baby unit are pre-paired at the factory. Once both units are powered on, they should automatically connect. If the connection is lost or you are adding a new camera, follow the pairing instructions in the "Troubleshooting" section.

6. Operating Instructions

6.1 Powering On/Off

• To turn on the parent unit, press and hold the Power Button until the screen lights up.
• To turn off the parent unit, press and hold the Power Button again until the screen turns off.
• The baby unit powers on automatically when plugged into an outlet.

6.2 ECO Mode (Voice Activation)

ECO mode conserves battery life by turning off the screen and audio when no sound is detected from the baby's room. The monitor will automatically activate when sound is detected.

• To activate/deactivate ECO mode, navigate through the menu settings on the parent unit.

Figure 5: ECO Mode in action, activating upon sound detection

6.3 Two-Way Audio Communication

The two-way audio feature allows you to speak to your baby through the monitor's speaker.

• Press and hold the Talk Button on the parent unit to speak. Release the button to hear your baby.

Figure 6: Two-Way Communication Feature

6.4 Night Vision

The baby unit automatically activates infrared night vision in low-light conditions, providing a clear black-and-white image of your baby.

Figure 7: Automatic Infrared Night Vision

6.5 Digital Zoom

You can zoom in on the video feed to get a closer look at your baby.

• Use the navigation buttons on the parent unit to activate and control the 2X digital zoom.

Figure 8: 2X Digital Zoom Functionality

6.6 Lullabies

The monitor includes 4 built-in lullabies to help soothe your baby to sleep.

• Press the Lullaby Button on the parent unit to play or stop lullabies.
• You can adjust the volume of the lullabies using the volume buttons.

Figure 9: Lullaby Feature

6.7 Temperature Monitoring

The baby unit has a built-in temperature sensor that displays the room temperature on the parent unit's screen.

• Monitor the temperature to ensure your baby's room is comfortable.
• The monitor may have an alert function for temperatures outside a set range (refer to menu settings).

Figure 10: Real-time Temperature Display

6.8 Adding Multiple Cameras (Optional)

The GHB Baby Monitor supports connecting up to 4 cameras to a single parent unit, allowing you to monitor multiple rooms or children.

• Additional cameras are sold separately.
• To add a new camera, access the "Camera Management" or "Add Camera" option in the parent unit's menu and follow the on-screen instructions. You will typically need to press a pairing button on the new camera unit.

Figure 11: Support for up to 4 Cameras

7. Maintenance

• Cleaning: Wipe the monitor and camera surfaces with a soft, dry, lint-free cloth. Do not use cleaning sprays or liquid cleaners.
• Battery Care: To prolong battery life, avoid fully discharging the parent unit's battery frequently. Charge it regularly. If storing the unit for a long period, charge it fully every few months.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

8.1 Re-pairing the Units

If the parent unit and baby unit lose connection, you may need to re-pair them:

1. Ensure both units are powered on and within close proximity (e.g., within 1 meter).
2. On the parent unit, go to the "Camera Management" or "Add Camera" section in the menu.
3. Select an available camera slot (e.g., Camera 1, Camera 2).
4. Follow the on-screen prompts. You will typically be instructed to press and hold the Pairing Button on the back of the baby unit for a few seconds until the parent unit confirms pairing.

9. Specifications

10. Warranty and Support

GHB products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or spare parts availability, please refer to the warranty card included with your product or contact GHB customer service through the retailer where you purchased the product. Please retain your proof of purchase for warranty claims.