Introduction
The HeatnBond Hem Iron-On Adhesive is a double-sided, heat-activated adhesive designed for permanently hemming garments and home decor items without the need for sewing. This regular weight adhesive is suitable for light fabrics such as cotton, rayon, polyester blends, and acrylic fabrics. It creates a clean, durable hem in seconds.
Image: HeatnBond Hem Iron-On Adhesive, Regular Weight, Black product packaging.
Setup
- Pre-wash Fabrics: For best results, pre-wash all materials without using fabric softeners. This ensures optimal adhesion.
- Pre-test Adhesive: Before starting your main project, it is recommended to pre-test the adhesive on a small, inconspicuous area of your fabric to ensure compatibility and desired results.
- Preheat Iron: Set your iron to medium heat. Ensure the steam function is turned OFF.
Operating Instructions
Follow these steps to apply HeatnBond Hem Iron-On Adhesive:
- Prepare Hem: Turn the garment or fabric item inside out. Measure and press the new hemline into the fabric using your preheated iron. This creates a crisp fold for the adhesive.
- Apply Adhesive: Place the HeatnBond Hem tape inside the newly folded hem. Ensure it is positioned evenly along the edge.
- Bonding Process: Place your iron directly onto the fabric over the tape. Hold the iron in place for 3-5 seconds on each section. Slightly overlap sections as you move along the hem to ensure continuous bonding. Avoid moving the iron back and forth.
- Final Press: Once the entire surface is bonded, turn the item right side out and iron the fabric for an additional 1-3 seconds to ensure a smooth, finished appearance.
Image: Step-by-step visual guide demonstrating the application of HeatnBond Hem adhesive to pants using an iron.
Video: Official demonstration of HeatnBond Hem Iron-On Adhesive application by Therm O Web Inc. This video illustrates the process of hemming fabric using the adhesive tape and an iron.
Maintenance
HeatnBond Hem adhesive is designed for durability. Once applied, the hem is permanent and resistant to washing and drying. Follow these care instructions:
- Washing: Machine washable. Use cold or cool water.
- Drying: Tumble dry on low heat.
- Ironing: Iron on medium heat (silk/wool setting). Do not use steam.
- Bleach: Do not bleach.
- Dry Cleaning: Do not dry clean.
Image: Reverse side of the product packaging, displaying comprehensive instructions and international care symbols for washing, drying, and ironing.
Troubleshooting
If the adhesive does not bond properly, consider the following:
- Iron Temperature: Ensure your iron is set to the correct medium heat setting and that the steam function is off. Insufficient heat will prevent proper activation of the adhesive.
- Pressure and Time: Apply firm, even pressure with the iron for the recommended 3-5 seconds per section. Holding the iron for too short a duration or with too little pressure may result in a weak bond.
- Fabric Compatibility: This regular weight adhesive is best for light fabrics. For heavier fabrics like denim or corduroy, consider using HeatnBond Hem Super Weight adhesive.
- Fabric Softener: Ensure fabrics were pre-washed without fabric softeners, as these can interfere with adhesion.
Specifications
- Brand: HeatnBond
- Model Number: 3726
- Color: Black
- Material: Hot Melt Adhesive
- Adhesive Type: Double-sided, Heat-activated, Permanent
- Recommended Uses: Arts and Craft, Sewing (Hemming)
- Surface Recommendation: Cloth
- Compatible Material: Cotton, Rayon, Polyester Blends, Acrylic
- Item Weight: 0.64 ounces
- Product Dimensions: 0.75 x 3.75 x 5.38 inches
- Water Resistance Level: Not Water Resistant (but washing and drying resistant)
- Upper Temperature Rating: 150 Degrees Celsius
Warranty and Support
For specific warranty information or product support, please contact the manufacturer, Therm O Web, directly. Their contact details can typically be found on the product packaging or their official website.
