Intex Easy Set Round Above Ground Pool

Introduction

This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Intex 28106NP Easy Set Round Above Ground Pool. Please read all instructions carefully before installation and use to ensure a safe and enjoyable experience.

Image: The Intex Easy Set Round Above Ground Pool, blue in color, with its inflatable top ring.

Safety Information

WARNING: Failure to follow these instructions can result in serious injury or death.

• For external use only.
• Avoid contact with eyes.
• Keep away from naked flame or direct heat sources.
• Adult supervision is required at all times when children are in or near the pool.
• Do not dive or jump into the pool. Shallow water can cause serious injury.
• Ensure the pool is set up on a completely level surface to prevent collapse.
• Keep all electrical devices away from the pool.
• Do not sit, stand, or climb on the inflatable top ring.

Image: A warning sign indicating the usage load. The pool's usage load is 353 kg/m², calculated with 3 users weighing 50 kg each. For installations on roofs, terraces, balconies, or patios, consult a technician for structural load capacity.

Package Contents

Your Intex Easy Set Pool package typically includes:

• One (1) Intex Easy Set Pool Liner (Model 28106NP)
• Instruction Manual

Note: This model (28106NP) does not include a filter pump. A separate pump system may be required for water filtration and maintenance.

Image: The product packaging box, displaying the pool dimensions (2.44m x 61cm) and water capacity (1942 Liters).

Setup

Estimated setup time: Approximately 10 minutes (excluding filling time).

1. Choose a Level Location: Select a firm, level area free of sharp objects, debris, and excessive slopes. A slight incline can cause the pool to collapse. Clear the area and lay down a ground cloth (not included) for added protection.
2. Unfold the Pool Liner: Carefully spread out the pool liner on the prepared level ground. Ensure the drain plug is facing the desired drainage area.
3. Inflate the Top Ring: Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm to the touch but not over-inflated. Do not use a high-pressure air compressor.
4. Begin Filling with Water: Start filling the pool with water. As the water level rises, the inflatable top ring will float and the pool walls will begin to rise and take shape. Smooth out any wrinkles on the bottom of the pool as it fills.
5. Continue Filling: Fill the pool to the indicated fill line, which is typically just below the inflatable ring. Do not overfill.

Image: Visual guide for pool setup, showing three steps: 1. Place the pool on level ground. 2. Inflate the top ring. 3. Fill the pool with water and enjoy.

Image: Diagram illustrating the pool dimensions (244 cm diameter, 61 cm height, 46 cm water fill line) and the "SUPER TOUGH" 3-layer PVC-Polyester material construction.

Operating the Pool

Once the pool is set up and filled, it is ready for use. Always ensure adult supervision, especially when children are present. Maintain proper water chemistry and cleanliness for a safe swimming environment.

Image: Two individuals enjoying the Intex Easy Set Pool, demonstrating its capacity for recreational use.

Maintenance

Regular maintenance is crucial for extending the life of your pool and ensuring clean, safe water.

• Water Treatment: Since this model does not include a filter pump, you will need to manually treat the water. Use appropriate pool chemicals (e.g., chlorine tablets, algaecide) to maintain proper pH levels and sanitize the water. Test water regularly.
• Cleaning: Use a pool skimmer net to remove leaves, insects, and other debris from the water surface daily. A pool vacuum (not included) can be used to clean the bottom of the pool.
• Liner Care: Inspect the pool liner periodically for any signs of wear, tears, or punctures. Repair small holes with a vinyl repair kit (not included) as soon as they are detected.
• Covering the Pool: When not in use, cover the pool with a pool cover (not included) to prevent debris from entering and reduce water evaporation.

Storage

At the end of the swimming season or when the pool will not be used for an extended period, proper storage is essential.

1. Drain the Pool: Connect a garden hose to the drain plug and open the plug to drain the water completely. Ensure the water drains away from your home and any electrical outlets.
2. Clean and Dry: Once drained, clean the inside and outside of the pool liner thoroughly with mild soap and water. Rinse completely. Allow the pool to air dry completely in the sun to prevent mold and mildew.
3. Deflate and Fold: Deflate the top inflatable ring. Carefully fold the pool liner, avoiding sharp creases that could damage the material.
4. Store: Store the pool in a dry, cool place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective bag to prevent damage from pests or sharp objects.

Troubleshooting

Specifications

• Brand: Intex
• Model Number: 28106NP
• Shape: Round
• Color: Blue
• Material: Polyester, PVC (3-ply "SUPER TOUGH" material)
• Product Dimensions (L x W x H): 120.08" x 120.08" x 29.92" (244 cm x 61 cm)
• Water Capacity: 1942 Liters (513 Gallons)
• Item Weight: 9.9 pounds (4.5 Kilograms)
• Assembly Required: No (referring to complex frame assembly, simple inflation/filling required)
• Special Feature: Easy to assemble
• Indoor/Outdoor Usage: Outdoor

Image: Close-up diagram showing the multi-layer construction of the pool material, with specific thickness measurements for different sections (e.g., 0.265mm for the top ring, 0.25mm and 0.41mm for the side walls).

Warranty and Support

Specific warranty information for the Intex 28106NP Easy Set Pool was not provided in the product data. Please refer to the product packaging or contact Intex customer service directly for warranty details and support inquiries.

You can often find support information on the official Intex website or through the retailer where the product was purchased.