Majority DX10

Majority DX10 PC Speakers User Manual

Model: DX10

Introduction

Thank you for choosing the Majority DX10 PC Speakers. These compact, USB-powered stereo speakers are designed to enhance your audio experience for computers, laptops, and other compatible devices. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

What's Included

2 x Majority DX10 PC Speakers
Integrated USB power cable
Integrated 3.5mm AUX audio cable
User Manual (this document)

Figure 1: Contents of the Majority DX10 speaker package, including the two speakers, integrated cables, and user manual.

Setup Guide

Placement: Position the two DX10 speakers on either side of your computer monitor or desired listening area. Ensure they are on a stable, flat surface. The compact design allows for versatile placement on desktops or shelves.
Figure 2: Proper placement of the DX10 speakers flanking a laptop for optimal stereo sound.
Connect Audio Cable: Locate the integrated 3.5mm AUX audio cable extending from one of the speakers. Plug this cable into the 3.5mm audio output (headphone jack) of your computer, laptop, or other audio device.
Connect USB Power: Locate the integrated USB power cable. Plug this USB connector into an available USB port on your computer, a USB wall adapter (not included), or any other USB power source. The speakers are USB plug-and-play, requiring no additional software installation.
Figure 3: Detail of the speaker connections, showing the USB cable for power and the 3.5mm AUX cable for audio input.
Power On: Once both cables are connected, the speakers should power on automatically, indicated by a green LED light on the front of the main speaker.

Operating Instructions

Volume Control

The Majority DX10 speakers feature a single intuitive control knob on the front of the main speaker. Rotate this knob clockwise to increase the volume and counter-clockwise to decrease it. This knob also functions as the power on/off switch by rotating it fully counter-clockwise until it clicks.

Figure 4: The front panel of the speaker showing the volume control knob and the 3.5mm headphone jack.

Headphone Jack

A 3.5mm headphone jack is conveniently located on the front of the main speaker. Plug your headphones into this jack for private listening. When headphones are plugged in, the speaker audio will automatically mute. Unplug the headphones to resume audio playback through the speakers.

Majority DX10 speaker with headphones plugged into the front jack

Figure 5: Headphones connected to the speaker's front jack for private audio listening.

Audio Playback

Ensure your audio source (computer, laptop, etc.) has its volume turned up and is playing media. The DX10 speakers will reproduce clear 2.0 channel stereo sound. Adjust the volume using the speaker's control knob or your device's volume settings.

Video 1: Official product video demonstrating the Majority DX10 Computer Speakers in use, highlighting their sound quality and compact design.

Maintenance and Care

Cleaning: Use a soft, dry cloth to clean the exterior of the speakers. Do not use liquid cleaners or abrasive materials, as they may damage the finish.
Storage: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.
Handling: Avoid dropping or subjecting the speakers to strong impacts, which can damage internal components.
Ventilation: Ensure the speakers are placed in an area with adequate ventilation to prevent overheating.

Troubleshooting

Problem	Possible Cause	Solution
No sound from speakers.	Speakers not powered on. Volume too low. Audio cable not connected properly. Headphones plugged in. Device audio output issue.	Ensure green LED is lit; rotate volume knob clockwise. Increase volume on speakers and device. Check 3.5mm AUX cable connection at both ends. Unplug headphones from the speaker. Test device with other audio output or try speakers on another device.
Distorted or poor sound quality.	Volume too high. Poor audio source quality. Interference.	Reduce volume on speakers and device. Try a different audio file or source. Move speakers away from other electronic devices.
Green LED not lit.	USB power cable not connected. USB port issue.	Ensure USB cable is securely plugged into a powered USB port. Try a different USB port or power adapter.

Specifications

Model Name: DX10
Brand: Majority
Speaker Type: Monitor
Connectivity: USB (power), 3.5mm AUX (audio)
Audio Output Mode: Stereo (2.0 Channel)
Speaker Maximum Output Power: 10 Watts (Peak)
Speaker Size: 2.5" Full-Range Drivers (9.3 cm)
Control Method: Rotary Knob (Volume/Power), Headphone Jack
Material: Plastic
Color: Black
Product Dimensions: 3.5"D x 4.65"W x 6.5"H (per speaker)
Item Weight: 1.43 pounds (total)
Mounting Type: Tabletop Mount
Compatible Devices: PC, Laptop, Desktop, Tablet, MP3 Player, TV, Smartphone, other audio devices with 3.5mm output.

Warranty and Support

The Majority DX10 PC Speakers come with a standard warranty. You can extend this warranty to 3 years by registering your product online within 30 days of purchase. For detailed warranty terms, product registration, and technical support, please visit the official Majority website or contact their customer service team.

For additional support, you may refer to the official Majority store on Amazon: Majority Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.