TP-Link N300 WiFi Extender (RE105) User Manual

Introduction

The TP-Link N300 WiFi Extender (RE105) is designed to expand your existing Wi-Fi network coverage, eliminating dead zones and providing reliable wireless connectivity throughout your home. Despite its compact size, the RE105 projects Wi-Fi access into areas your standard router may not reach, supporting wireless speeds of up to 300Mbps.

Key Features

• Extended WiFi Coverage: Boosts Internet Wi-Fi coverage with two external antennas for more reliable Wi-Fi, compatible with any Wi-Fi Router, Gateway, or Access Point.
• Versatile Modes: Functions as both a Wi-Fi Repeater to expand network coverage and an Access Point (AP) to create a new Wi-Fi hotspot from an Ethernet connection.
• Fast Ethernet Port: Provides wired speed and reliability for devices like smart TVs, gaming consoles, or PCs.
• Enhanced Range: Two external antennas with MIMO technology improve range compared to standard range extenders.
• Easy Setup: Quick and easy setup and management via the TP-Link Tether app (Android, iOS).
• Optimal Placement Indicator: An intelligent LED indicator helps users find the best location for optimal Wi-Fi connection.

What's in the Box

• 1 x TP-Link RE105 N300Mbps Wi-Fi Range Extender
• 1 x Quick Installation Guide

Setup Guide

1. Unboxing and Initial Placement

Carefully remove the RE105 extender and the Quick Installation Guide from the packaging. Identify a suitable location for the extender. For optimal performance, place the RE105 halfway between your router and the Wi-Fi dead zone. The intelligent LED indicator on the device will help you determine the best spot.

Image: The TP-Link RE105 N300 WiFi Extender, showing its compact design and two external antennas.

Image: A diagram illustrating the placement of the RE105 between a router and a device, with an intelligent LED indicator showing connection quality (green for good, orange for too far).

2. Connecting to Your Network (WPS Method)

1. Plug the RE105 into an electrical outlet.
2. Press the WPS button on your main Wi-Fi router.
3. Within two minutes, press the Range Extender button (WPS button) on the RE105.
4. The Signal LED on the RE105 should turn solid green, indicating a successful connection.

3. Connecting to Your Network (TP-Link Tether App Method)

1. Download the TP-Link Tether app from the App Store (iOS) or Google Play Store (Android).
2. Plug the RE105 into an electrical outlet near your router.
3. Open the Tether app and follow the on-screen instructions to set up your RE105. The app will guide you through connecting to the extender's default Wi-Fi network and then configuring it to extend your main router's network.
4. Once configured, relocate the RE105 to an optimal location using the intelligent LED indicator as a guide.

Operating Modes

1. Repeater Mode (Default)

In Repeater Mode, the RE105 extends the existing Wi-Fi signal from your main router to eliminate Wi-Fi dead zones. This mode is ideal for expanding coverage to areas with weak signals, such as distant rooms or multiple floors.

Image: An illustration demonstrating how the RE105 extends Wi-Fi coverage from a main router to reach more devices throughout a home, covering up to 800 sq ft for 8 devices.

2. Access Point (AP) Mode

The RE105 can also function as an Access Point. In AP Mode, it converts a wired internet connection into a wireless Wi-Fi hotspot. This is useful in rooms where you have an Ethernet port but no Wi-Fi, allowing you to create a new Wi-Fi network for your wireless devices.

Image: The RE105 operating in Access Point Mode, connected to an Ethernet port to provide Wi-Fi connectivity in a room.

To switch to AP Mode, connect an Ethernet cable from your router (or any active Ethernet port) to the Ethernet port on the RE105. Then, use the Tether app or the web interface to configure the RE105 to Access Point mode.

Maintenance

• Firmware Updates: Regularly check for and install firmware updates via the TP-Link Tether app or the official TP-Link website to ensure optimal performance and security.
• Cleaning: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.
• Ventilation: Ensure the RE105 is placed in a well-ventilated area to prevent overheating. Avoid covering the ventilation holes.
• Power Cycle: If the device experiences issues, try power cycling it by unplugging it from the outlet for 10 seconds and then plugging it back in.

Troubleshooting

Specifications

Image: The RE105 highlighting its compact dimensions and the Fast Ethernet port, suitable for connecting various wired devices.

Image: The RE105 showcasing its two external antennas, which utilize MIMO technology for stable and extended Wi-Fi connectivity.

Warranty and Support

TP-Link offers a 2-year warranty for the RE105 N300 WiFi Extender. For any technical assistance, setup issues, or product inquiries, 24/7 technical support is available. Please refer to the official TP-Link website for contact information and support resources.

Legal Disclaimer

Important Information:

• Maximum wireless signal rates are physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of:
  1. Environmental factors, including building materials, physical objects, and obstacles.
  2. Network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead.
  3. Client limitations, including rated performance, location, connection quality, and client condition.
• The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non-standard or outdated.
• Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors, and other environmental conditions.