CoolStream CarPro Bluetooth Adapter

Product Overview

The CoolStream CarPro is a Bluetooth adapter designed to enable wireless music streaming in select vehicles equipped with a factory 30-pin iPod media cable. It provides a convenient way to stream audio from your smartphone or other Bluetooth-enabled devices directly to your car's sound system, utilizing the existing iPod integration.

Note: The CarPro is for music streaming only and does not support phone calls. The factory 30-pin iPod cable is not included with the CarPro adapter.

Image: The CoolStream CarPro Bluetooth Adapter, a compact black device with the 'CarPro' logo.

Important Notes Before Use

Please review the following critical information before installing and using your CoolStream CarPro adapter:

Image: A warning graphic stating "ATTENTION PLEASE" with key notes below it.

1. One Downloaded MP3 Song Required: Your phone must have at least one downloaded MP3 song saved in its music library. The CarPro uses this song to be recognized by the car's system. Without this, your phone may pair, but no music will play. This is not optional.
2. Compatibility Not Guaranteed: While designed for specific models, compatibility can vary. Always check the detailed compatibility lists provided in the Vehicle Compatibility section before purchase and installation.
3. Phone Pause Button Disabled: When paired to the CarPro, the pause function on your phone may be disabled. Use your vehicle's steering wheel controls or stereo buttons to pause and control music playback.
4. iPod Cable Not Included: The 30-pin iPod cable required for connection is not included with the CoolStream CarPro. It connects to your vehicle's existing factory-installed iPod cable.

Vehicle Compatibility

The CoolStream CarPro is designed for specific vehicle models from 2005-2011 that feature a factory-installed 30-pin iPod Media Cable. It is not compatible with aftermarket stereos or USB cables.

Compatible Vehicles:

Image: A detailed table listing various car and motorcycle manufacturers and models compatible with the CoolStream CarPro.

Refer to the image above for a comprehensive list of compatible manufacturers and models, including Acura, Aston Martin, Bentley, BMW, Cadillac, Chevrolet, Dodge, Ferrari, Ford, Harley Davidson, Honda, Infiniti, Jaguar, Jeep, Kawasaki, Land Rover, Lexus, Maserati, Mazda, Nissan, Polaris, Porsche, Subaru, Toyota, Victory, Volvo, and Winnebago.

Non-Compatible Vehicles and Cables:

Image: A table with a large red 'X' over it, listing car and motorcycle models that are NOT compatible with the CoolStream CarPro.

The CarPro is not compatible with the models listed in the image above, including certain years of Cadillac, Dodge, Ford, GMC, Harley, Honda, Hyundai, Infiniti, Jaguar, Jeep, Land Rover, Lexus, Mazda, Nissan, Porsche, Suzuki, Toyota, and Volvo. Additionally, it is not compatible with aftermarket iPod cables such as Denison Gateway, Griffin AutoPilot, iSimple, Pioneer AVIC F700BT, Sony WXGTYYU1, USA-Spec PA15-HON2Y, USA-Spec PA15-NIS, USA-Spec PA15-TOY.

Image: A USB cable with a red circle and line through it, indicating non-compatibility.

The CoolStream CarPro is specifically designed for 30-pin iPod cables and is not compatible with standard USB cables for audio streaming.

Setup Instructions

Follow these steps to set up your CoolStream CarPro for the first time:

1. Locate Your 30-Pin iPod Cable: Find the factory-installed 30-pin iPod media cable in your vehicle, typically located in the glove compartment or center console.
2. Connect the CarPro: Securely plug the CoolStream CarPro adapter into the 30-pin connector of your vehicle's iPod cable. It should click into place.

Image: The CoolStream CarPro adapter connected to a Mercedes Media Interface Cable with a 30-pin connector.
3. Prepare Your Phone: Ensure your mobile device has at least one downloaded MP3 song saved in its local music library. This is crucial for the CarPro to be recognized by your car's system.
4. Pair with Your Device: Turn on your vehicle's ignition. The CarPro will enter pairing mode. On your mobile device, go to Bluetooth settings and select "CoolStream CarPro" to pair.
5. Set Car Stereo to AUX Mode: Your Mercedes stereo needs to be in AUX mode to hear music from the CarPro.


Image: A step-by-step visual guide on how to navigate the Mercedes stereo menu to select AUX mode.

• Press the "DISC" button until "Audio" appears on the screen's menu.
• Select "Audio" from the menu using the control knob. A drop-down menu will appear.
• Scroll to the bottom of the drop-down menu and select "AUX".
• Note: AUX is typically at the bottom of the menu, so scrolling may be required. The car must be in Park to access this setting.

Operating the CarPro

Once set up, the CoolStream CarPro offers seamless music streaming:

• Automatic Reconnection: After the initial pairing, the CarPro will automatically reconnect to your mobile device when you start your vehicle's engine.
• Music Streaming Only: The CarPro is designed exclusively for music streaming. Crystal clear audio will pause for incoming calls or navigation instructions and seamlessly resume when completed. It does not support making or receiving phone calls.
• Steering Wheel Controls: You can control music saved on your phone using your vehicle's steering wheel buttons, including volume adjustment, pause, and track selection (next/previous). Note that steering wheel buttons cannot control browsing within music apps like Spotify or Apple Music.
• Song Information Display: Only iPhones support song information display on the car's entertainment screen. Song titles and artist information will not display when streaming from Android phones.

Image: A car's stereo display showing song information while the CoolStream CarPro is connected and streaming music from an iPhone.

Troubleshooting

If you encounter issues with your CoolStream CarPro, try the following solutions:

• No Music Playing After Pairing:
  • Ensure you have at least one downloaded MP3 song saved in your phone's local music library. The CarPro requires this to be recognized by the car.
  • Verify your car stereo is set to AUX mode.
• No Sound:
  • Confirm your car's stereo input is correctly set to AUX.
  • Check the volume levels on both your phone and the car stereo.
• Steering Wheel Controls Not Working for Music Apps (e.g., Spotify, Apple Music):
  • This is a known limitation. Steering wheel controls support volume, pause, and track selection for music saved directly on your phone. They do not support browsing or advanced controls within streaming applications.
• No Song Display on Android Phone:
  • This is normal behavior. Only iPhones support song information display on the car's screen.
• Interference or Poor Audio Quality:
  • Ensure the CarPro is securely connected to the 30-pin cable.
  • Try repositioning your phone or the CarPro if possible, away from other electronic devices that might cause interference.
• Device Not Recognized by Car:
  • Disconnect and reconnect the CarPro from the 30-pin cable.
  • Turn your car off and on again.
  • Forget the CarPro from your phone's Bluetooth settings and re-pair.

Product Specifications

Safety Information

Please observe the following safety guidelines:

• Do not use while driving if it distracts from safe operation of the vehicle.
• Keep the device away from excessive heat and moisture.
• Do not dispose of the device in regular trash; follow local electronic waste disposal guidelines.
• The device may interfere with other wireless devices.

Warranty and Support

Warranty Information

The CoolStream CarPro comes with a 1-year warranty from the date of purchase.

Customer Support

For further assistance, troubleshooting, or product inquiries, please visit the official CoolStream Store on Amazon or refer to the contact information provided with your product packaging.