Giantex Gaming Recliner Chair (Model GT65746RE-HW)

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Giantex Gaming Recliner Chair, Model GT65746RE-HW. Please read thoroughly before use to ensure safe and proper functionality.

Important Safety Information

To prevent injury or damage to the product, please adhere to the following safety guidelines:

• The maximum weight capacity for this chair is 330 lbs (150 kg). Do not exceed this limit.
• Exercise caution when adjusting the backrest and footrest to avoid pinching or trapping body parts.
• Ensure all components are securely fastened during assembly. Periodically check and tighten fasteners as needed.
• Keep children and pets away from moving parts of the chair.
• Do not stand on the chair or use it as a step stool.
• Use the chair only for its intended purpose as a gaming or lounge recliner.
• Disconnect the power adapter from the wall outlet before cleaning or performing any maintenance.

Parts List

Please verify that all the following components are included in your package before beginning assembly:

• Chair Base (Seat with integrated footrest mechanism)
• Backrest
• Chair Legs (4 units)
• Massage Lumbar Pillow
• Remote Control (for massage function)
• Power Adapter
• User Manual (this document)

Setup and Assembly

This gaming recliner chair is designed for easy assembly. No additional tools are required. Follow these steps carefully:

1. Unpacking: Carefully remove all components from the packaging. Place them on a soft, clean surface to prevent scratches.
2. Attach Legs: Locate the four chair legs. Screw each leg securely into the designated threaded holes on the underside of the chair base. Ensure they are tightened firmly.
3. Attach Backrest: Align the metal brackets on the backrest with the corresponding slots on the chair base. Slide the backrest down until it clicks securely into place. Verify it is firmly attached by gently pulling upwards.
4. Connect Massage Unit: Locate the power cable for the massage lumbar pillow. Connect it to the corresponding port on the chair's internal wiring. Connect the remote control cable to the massage unit.
5. Power Connection: Plug the power adapter into the chair's power input, then into a suitable wall outlet.

Operating Instructions

Reclining Function

The backrest can be adjusted to multiple positions, ranging from 90° (upright) to 160° (fully reclined), suitable for gaming, watching TV, or napping. To recline, apply gentle pressure to the backrest while pushing back. To return to an upright position, lean forward. The footrest extends automatically as the chair reclines and retracts when returning to an upright position.

Massage Function

The electric massage lumbar pillow provides targeted relief for your waist. Use the corded remote control to operate the massage features:

• Modes: The remote control offers 8 distinct massage modes. Use the arrow buttons to cycle through the available modes.
• Intensity: Adjust the vibration intensity using the '+' and '-' buttons on the remote to suit your preference.
• Timer: Set the massage duration for either 15 or 30 minutes using the timer button.

Storage

The chair features convenient storage options:

• Side Pockets: Extra storage bags are located on both sides of the chair, ideal for holding small items like remote controls, magazines, or mobile devices.
• Back Pocket: A pocket on the back of the chair is suitable for storing the massage remote control when not in use.

Maintenance

To ensure the longevity and appearance of your Giantex Gaming Recliner Chair, follow these care instructions:

• Cleaning: Wipe clean with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the PU leather.
• Spills: Promptly blot any spills with a clean, dry cloth to prevent staining.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading and material degradation.
• Inspection: Periodically check all connections and fasteners to ensure they remain tight. Tighten any loose parts immediately.

Troubleshooting Guide

If you encounter any issues with your chair, please refer to the following common solutions:

• Massage Function Not Working:
  • Ensure the power adapter is securely plugged into both the chair and a functional wall outlet.
  • Check that all cables connecting the massage unit and remote control are properly connected.
• Reclining Mechanism Stiff or Not Operating Smoothly:
  • Ensure no obstructions are preventing the backrest or footrest from moving freely.
  • Apply even pressure when reclining or returning to an upright position. Avoid sudden forceful movements.
• Chair Feels Unstable:
  • Verify that all four legs are securely screwed into the chair base.
  • Ensure the backrest is fully engaged in its locking mechanism.

Product Specifications

Warranty and Customer Support

For warranty information or assistance with your Giantex Gaming Recliner Chair, please refer to the warranty card included with your purchase or contact Giantex customer support directly. You can also visit the official Giantex store for more information: Giantex Store.