1. Introduction
Thank you for choosing the Lucande Silvan LED Garden Bollard with Motion Sensor. This product is designed to provide efficient and intelligent outdoor lighting for your garden, pathways, terraces, or balconies. Featuring a modern design and an integrated motion sensor, it enhances both security and convenience. Please read this manual carefully before installation and use to ensure safe and optimal performance.
2. Safety Instructions
- Always disconnect the power supply before installation, maintenance, or repair.
- Installation should be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards.
- Ensure the product is securely mounted on a stable surface.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
- This product is rated IP54, providing protection against dust and splashing water from any direction. Do not immerse the product in water.
- Keep packaging materials out of reach of children.
3. Package Contents
Please check that all components are present and undamaged:
- Lucande Silvan LED Garden Bollard
- Integrated LED light source
- Mounting hardware (screws, anchors)
- User Manual
4. Product Overview
The Lucande Silvan LED Garden Bollard is a modern outdoor lighting fixture designed for durability and functionality. It features an integrated LED light source for energy efficiency and a motion sensor for automatic operation.
The Lucande Silvan LED Garden Bollard provides modern illumination for outdoor spaces, featuring an integrated motion sensor.
A detailed view of the bollard's upper section, clearly showing the motion sensor for automatic light activation.
This image provides a closer look at the LED light source and the motion sensor, which controls the light's operation.
5. Setup and Installation
Important: Installation must be carried out by a qualified professional. Ensure the main power supply is switched off before commencing any electrical work.
5.1 Mounting Location
Choose a suitable outdoor location for the bollard, such as a garden path, terrace, or driveway. Ensure the surface is level and stable for secure floor mounting. Consider the motion sensor's detection range and angle when positioning the light.
5.2 Wiring
- Prepare the electrical wiring at the chosen installation point. The bollard requires a wired connection to the main power supply (230 Volts).
- Open the wiring compartment at the base of the bollard.
- Connect the live, neutral, and earth wires to the corresponding terminals inside the compartment. Ensure all connections are tight and properly insulated.
- Close the wiring compartment securely to maintain the IP54 rating.
View of the internal wiring connections, showing the terminal block for electrical installation. Ensure all connections are secure and properly insulated.
5.3 Securing the Bollard
- Position the bollard base over the prepared mounting surface.
- Mark the positions for drilling through the holes in the bollard's base.
- Drill appropriate holes and insert wall anchors if necessary.
- Secure the bollard to the surface using the provided mounting screws. Ensure it is firmly fixed and does not wobble.
The sturdy base of the bollard, designed for secure floor mounting, with pre-drilled holes for installation.
6. Operating Instructions
The Lucande Silvan LED Garden Bollard features an integrated motion sensor for automatic light activation. Once installed and powered, the light will operate based on the sensor's settings.
6.1 Motion Sensor Settings
The motion sensor has adjustable settings for detection range and illumination time. These settings are typically located within the sensor unit itself, often accessible by rotating small dials or switches. Refer to the specific markings on your sensor for adjustment.
- Detection Angle: The sensor has a detection angle of 120°.
- Detection Range: The range can be adjusted from 6 to 10 meters. Adjust this to cover the desired area.
- Illumination Time: The duration the light stays on after motion is detected can be set from 5 seconds to 10 minutes. Set this according to your preference for how long the light should remain active.
Note: Test the sensor after making adjustments to ensure it functions as desired. Environmental factors like temperature and surrounding objects can influence sensor performance.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Lucande Silvan LED Garden Bollard.
- Cleaning: Clean the bollard regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish. Ensure the light is off and cool before cleaning.
- Inspection: Periodically check the mounting screws and electrical connections for tightness and signs of wear. If any damage is observed, disconnect power and consult a qualified electrician for repair.
- LED Light Source: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture may need professional servicing or replacement.
- Motion Sensor: Keep the motion sensor lens clean and free from obstructions (e.g., leaves, dirt) to ensure proper operation.
8. Troubleshooting
If you encounter issues with your Lucande Silvan LED Garden Bollard, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Faulty wiring. Sensor sensitivity too low. Ambient light too high. | Check circuit breaker. Verify wiring connections (consult electrician). Increase sensor sensitivity. Adjust sensor's lux setting if available, or wait for darker conditions. |
| Light stays on continuously. | Continuous motion detected. Sensor faulty. Illumination time set too long. | Check for constant movement in detection area. Contact support. Reduce illumination time setting. |
| Motion sensor not detecting. | Obstruction on sensor lens. Detection range too low. Sensor angle incorrect. | Clean sensor lens. Increase detection range. Adjust sensor's physical angle. |
If the problem persists after attempting these solutions, please contact customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Lucande |
| Model Name | Silvan |
| Model Number | 9619178 |
| Color | Graphite Grey (Ral 840-m), Black |
| Material | Metal, Aluminium |
| Style | Modern |
| Product Dimensions (L x W x H) | 18.7 cm x 14 cm x 100 cm |
| Item Weight | 3.35 Kilograms |
| Power Source | Wired |
| Special Features | Motion Sensor, Energy Efficient |
| Light Source | 1 x 14 W Integrated LED |
| Voltage | 230 Volts |
| Light Color | Warm White |
| Color Temperature | 3000 Kelvin |
| Luminous Flux | 700 Lumen |
| Wattage | 14 W |
| Switch Type | Motion Sensor |
| Waterproof Level | IP54 (Waterproof against splashing water) |
| Energy Efficiency Class | E (New scale) |
| Energy Consumption | 12 kWh/1000h |
| Mounting Type | Floor Mounting |
9.1 Energy Label Information
The current energy efficiency label for the product, indicating an 'E' rating and energy consumption of 12 kWh per 1000 hours. For more details, scan the QR code or visit the provided link: https://eprel.ec.europa.eu/qr/743633
10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
