1. Introduction
Thank you for choosing the Lindby Filiz LED Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
The Lindby Filiz is a modern, Scandinavian-style ceiling spotlight featuring four adjustable lamps with E14 sockets, crafted from concrete and wood. It is designed to provide efficient and atmospheric lighting for various indoor spaces.
Image 1.1: The Lindby Filiz LED Ceiling Light with four adjustable spotlights, featuring a wooden bar and concrete shades, installed in a modern interior setting.
2. Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply at the circuit breaker before beginning any installation or maintenance work.
- Voltage: This fixture operates at 230 Volts. Ensure your electrical supply matches this requirement.
- Bulb Type: Use only E14 LED bulbs as specified. Do not exceed the maximum wattage of 5 Watts per bulb.
- IP Rating: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is intended for indoor use only. Do not install in bathrooms or other areas where it may be exposed to moisture.
- Handling: Handle the concrete and wood components with care to avoid damage.
- Cleaning: Disconnect power before cleaning. Use a dry, soft cloth. Do not use abrasive cleaners or solvents.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.
- 1x Lindby Filiz Ceiling Light fixture (wooden bar with four spotlight holders)
- 4x Concrete lamp shades
- 4x E14 LED bulbs (5 Watts each)
- Mounting hardware (screws, wall plugs)
- Installation manual
Image 3.1: All components included in the package: the wooden fixture, four concrete shades, and four E14 LED bulbs.
4. Setup and Installation
Important: Ensure the main power supply is switched off at the circuit breaker before proceeding with installation.
4.1 Mounting the Fixture
- Prepare the Mounting Surface: Choose a suitable location on the ceiling. Mark the drilling points for the mounting bracket (integrated into the wooden bar) using the fixture as a template.
- Drill Holes: Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Secure the Fixture: Align the wooden bar with the drilled holes and secure it to the ceiling using the provided screws. Ensure it is firmly attached.
Image 4.1: Dimensions of the Lindby Filiz ceiling light, showing a length of 770mm and a height of 123mm. The diameter of the shades is 72mm.
4.2 Wiring
- Connect Wires: Carefully connect the household electrical wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth). Refer to the wiring diagram provided with the product or consult a qualified electrician.
- Secure Connections: Ensure all wire connections are secure and properly insulated.
Image 4.2: View of the internal wiring compartment within the wooden bar of the fixture, showing the terminal block for electrical connections.
4.3 Installing Bulbs and Shades
- Insert Bulbs: Screw the E14 LED bulbs into the four lamp holders. Do not overtighten.
- Attach Shades: Place the concrete lamp shades over the bulbs and secure them to the fixture. Ensure they are seated correctly.
Image 4.3: A close-up view of one of the spotlights, showing the concrete shade and wooden base, with the E14 bulb installed.
Once all steps are completed, restore power at the circuit breaker.
5. Operating Instructions
The Lindby Filiz LED Ceiling Light is operated via a standard wall switch connected to your household electrical circuit.
- Turning On/Off: Flip the wall switch to turn the light fixture on or off.
- Adjusting Spotlights: Each spotlight is individually adjustable. You can rotate and tilt the concrete shades to direct the light beam to your desired area.
Image 5.1: The Lindby Filiz ceiling light fully installed and illuminated, showcasing its four adjustable spotlights.
6. Maintenance
- Cleaning: Before cleaning, ensure the power supply to the fixture is turned off. Use a soft, dry, lint-free cloth to wipe the wooden bar and concrete shades. Do not use water, chemical cleaners, or abrasive materials, as these can damage the finish.
- Bulb Replacement:
- Switch off the main power supply to the fixture.
- Allow the old bulb to cool completely before touching it.
- Carefully unscrew the old E14 bulb.
- Screw in a new E14 LED bulb (max 5 Watts).
- Restore power and test the light.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Faulty bulb. Loose wiring connection. |
Check circuit breaker. Replace bulb. Check wiring (ensure power is off). |
| Light flickers. | Loose bulb. Incompatible dimmer switch (if applicable). Faulty bulb. |
Tighten bulb. Ensure dimmer is compatible with LED bulbs. Replace bulb. |
| One spotlight not working. | Faulty bulb in that spotlight. | Replace the specific bulb. |
If you encounter issues not listed here or if the problem persists after attempting the solutions, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Lindby |
| Model Number | 9621840 |
| Dimensions (L x W x H) | 77 x 7.2 x 12.3 cm |
| Weight | 1.23 Kilograms |
| Material | Wood, Stone (Concrete) |
| Color | Concrete Grey, Light Wood, Satin Nickel |
| Style | Modern |
| Number of Bulbs | 4 |
| Bulb Type | LED |
| Cap Type | E14 |
| Wattage per Bulb | 5 Watts (Max) |
| Voltage | 230 Volts |
| IP Rating | IP20 |
| Energy Efficiency | Energy-saving LED |
| Power Source | Corded Electric |
| Indoor/Outdoor Use | Indoor Use Only (IP20 rated) |
9. Warranty and Support
Lindby products are designed for quality and customer satisfaction. For warranty information, product support, or to report any issues, please contact your retailer or Lindby customer service directly.
Please have your model number (9621840) and purchase date available when contacting support.
