Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your RPNB Deluxe Safe and Lock Box. Designed with reinforced solid steel and a double-cylinder latch, this safe offers enhanced security for your valuables. Please read this manual thoroughly before using your safe.
Setup and Installation
Unboxing and Initial Inspection
Upon receiving your RPNB Deluxe Safe, carefully remove it from its packaging. Inspect the safe for any signs of damage. Ensure all components, including backup keys and mounting hardware, are present.
Figure 1: RPNB Deluxe Safe with interior view.
Battery Installation
The safe's digital keypad requires 4 AA alkaline batteries (not included). Locate the battery compartment on the inside of the safe door. Open the cover, insert the batteries according to the polarity indicators, and close the cover. A short beep will confirm correct installation.
Official Product Video: Safe Overview and Setup
Video: A brief overview of the RPNB ESA Series Electronic Security Home Safe, including key features and initial setup.
Mounting the Safe
Your safe comes with pre-drilled mounting holes and hardware for secure installation in a closet, shelf, or under the floor. For optimal security, it is highly recommended to bolt the safe to a fixed surface to prevent unauthorized removal.
Figure 2: Safe interior showing pre-drilled mounting holes.
Operating Instructions
Opening the Safe for the First Time (Emergency Key)
For initial access, remove the RPNB logo cover to reveal the emergency keyhole. Insert the emergency key and turn it counter-clockwise while simultaneously turning the knob clockwise to open the safe door. Keep emergency keys outside the safe to avoid being locked out.
Figure 3: Two methods of entry: Key and Digital Code.
Programming Your Digital Code
With the door open, press the "PROGRAM" button (usually located on the inside of the door near the battery compartment). The green light will illuminate, and you will hear a beep. Enter your new 3 to 8 digit code, then press the confirming button (usually a checkmark or 'E'). A successful programming will be indicated by a beep. If an error occurs, the red light will flash, and you will need to repeat the process.
Opening with Digital Code
Enter your programmed digital code (3 to 8 digits) on the keypad. The green light will illuminate. Turn the knob clockwise within 5 seconds to open the safe door.
Silent Mode
To enable or disable silent mode (keypad sound), press the "Voice Button" (usually indicated by a speaker icon). The green light will flash once to confirm the change.
Figure 4: Keypad indicator lights: Red (Warning), Green (Correct), Yellow (Low Power).
Maintenance
Battery Replacement
When the yellow indicator light flashes, it signifies low battery power. Replace all 4 AA alkaline batteries promptly to ensure continuous operation. If batteries completely drain, use the emergency key for access.
Cleaning
Clean the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
Troubleshooting
Forgotten Code
If you forget your digital code, use the emergency key to open the safe. Once open, you can reprogram a new code following the "Programming Your Digital Code" instructions.
Keypad Not Responding
Check the batteries. If they are low or dead, replace them. Ensure they are inserted with correct polarity. If the issue persists, use the emergency key for access and contact customer support.
Door Alignment Issues
If the door does not close or open smoothly, check for any obstructions around the door frame or hinges. Ensure the safe is mounted on a level surface. If the problem continues, contact customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | RPNB |
| Product Dimensions | 12.97"D x 13.76"W x 19.65"H |
| Lock Type | Electronic Combination Lock, Key |
| Color | Black |
| Capacity | 1.8 Cubic Feet |
| Material | Alloy Steel |
| Special Feature | Anti-Theft, Removable Shelf |
| Mounting Type | Wall Mount; Floor Mount |
| Control Type | Push Button Control |
| Included Components | Backup Keys |
| Alarm | anti-theft |
| Water Resistance Level | Not Water Resistant |
| Chamber Depth | 10.63 Inches |
| Chamber Height | 40 Centimeters |
| Chamber Width | 13.66 Inches |
| UPC | 779605537234 |
| Manufacturer | RPNB |
| Part Number | RP50ESA |
| Item Weight | 34.8 pounds |
| Country of Origin | China |
| Item model number | RP50ESA |
| Size | 19.65"×13.76"×12.97" |
| Style | Contemporary |
| Special Features | Anti-Theft, Removable Shelf |
| Batteries Included? | No |
| Batteries Required? | Yes |
| ASIN | B08DCTXNQQ |
| Customer Reviews | 4.5 4.5 out of 5 stars 3,728 ratings 4.5 out of 5 stars |
| Best Sellers Rank | #26,470 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #53 in Cabinet Safes |
| Date First Available | July 21, 2020 |
Figure 5: Exterior Dimensions (19.65"H x 13.76"W x 12.97"D).
Warranty and Support
RPNB stands behind its products. If you encounter any questions or difficulties with your safe, please contact RPNB customer support. Refer to the official RPNB website or the included user manual PDF for contact information.
For a complete user manual, please download the PDF version: User Manual (PDF)
Visit the official RPNB Store for more products and support: RPNB Store
