YunYiYi luo-003

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

YunYiYi TT-BH060 Earpads Replacement Manual

Model: luo-003

Introduction

This manual provides comprehensive instructions for the installation, use, and maintenance of your YunYiYi TT-BH060 Earpads. These replacement earpads are designed to be compatible with Taotronics TT-BH060 SoundSurge 60 Headphones, offering a refreshed listening experience and extending the life of your headphones.

Pair of YunYiYi TT-BH060 replacement earpads

Image: A pair of black replacement earpads, showcasing their soft, cushioned design.

Installation Guide

Replacing your old earpads with the new YunYiYi TT-BH060 Earpads is a straightforward process. No specialized tools are typically required, though a small flathead screwdriver or pry tool may assist in detaching the old retaining rings.

Step-by-Step Installation:

  1. Prepare Your Headphones: Gently remove the existing earpads from your Taotronics TT-BH060 SoundSurge 60 Headphones. This usually involves carefully prying off the plastic retaining ring that holds the earpad in place. Observe how the old earpad is attached to understand the mechanism.
  2. Mark and Remove Old Rings: If your old earpads have a separate plastic retaining ring, carefully mark its orientation (if necessary) and remove it from the old earpad. This ring will be reused with the new earpads.
  3. Install Old Rings onto New Earpads: Place the previously removed plastic retaining rings onto the new YunYiYi earpads. Ensure they are seated correctly and securely.
  4. Attach New Earpads: Align the new earpads (with the old retaining rings attached) with the headphone cups. Gently press and snap the retaining ring back into place on the headphone. Ensure the earpad is fully seated and secure around the headphone speaker.
Diagram showing four steps for earpad replacement: Mark, Take off old rings, Install old rings, Install Earpads.

Image: A visual guide illustrating the four key steps for replacing headphone earpads, from marking the old earpad to installing the new one.

Once installed, gently adjust the earpads to ensure a comfortable and secure fit on your headphones.

Features and Materials

The YunYiYi TT-BH060 Earpads are crafted with user comfort and sound quality in mind. They feature a combination of materials designed for durability and an enhanced listening experience.

  • Memory Foam Cushioning: The earpads are filled with soft memory foam that conforms to the shape of your ears. This provides a comfortable fit and helps to isolate sound from your environment, contributing to improved sound quality.
  • Protein Leather Exterior: The outer material is made from protein leather, offering a smooth, durable, and skin-friendly surface.
Diagram highlighting Memory Foam and Protein Leather components of the earpad.

Image: A close-up diagram of an earpad, pointing out its construction from Memory Foam and Protein Leather for comfort and durability.

Maintenance and Care

Proper care will extend the lifespan of your replacement earpads and maintain their comfort and acoustic properties.

  • Cleaning: Gently wipe the surface of the earpads with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the protein leather.
  • Storage: When not in use, store your headphones in a clean, dry place away from direct sunlight and extreme temperatures.
  • Avoid Punctures: Be careful not to puncture or tear the earpad material, as this can compromise the internal foam and overall integrity.

Troubleshooting

If you encounter any issues with your new earpads, consider the following common solutions:

IssuePossible Cause / Solution
Earpads do not fit securely.
  • Ensure the plastic retaining ring from your original earpads is correctly installed onto the new earpads.
  • Verify that the retaining ring is fully snapped into place on the headphone cup. Apply gentle, even pressure around the circumference.
  • Confirm compatibility: These earpads are specifically designed for Taotronics TT-BH060 SoundSurge 60 Headphones.
Reduced noise isolation or sound quality.
  • Ensure the earpads are fully seated and create a proper seal around your ears.
  • Check for any gaps between the earpad and the headphone cup.
  • Verify the earpads are not damaged or torn, which could affect the seal.
Earpads feel uncomfortable.
  • Allow some time for the memory foam to adapt to the shape of your ears.
  • Ensure the earpads are oriented correctly on the headphones.

Product Specifications

  • Brand: YunYiYi
  • Model Number: luo-003
  • Compatible Devices: Taotronics TT-BH060 SoundSurge 60 Headphones
  • Material: Faux Leather, Memory Foam
  • Color: Black
  • Item Weight: 1.13 ounces (approximately 32 grams)
  • Package Dimensions: 6.3 x 4.29 x 1.02 inches (approximately 16 x 10.9 x 2.6 cm)
Earpads size chart showing dimensions: 4.1 inches (105mm) height, 3.3 inches (85mm) width, 0.9 inches (25mm) thickness.

Image: A size chart detailing the dimensions of the earpads, including height, width, and thickness.

Safety Information

Please observe the following safety warnings:

Multi-language warning label about plastic bag suffocation hazard, recycling symbol, and general warning triangle.

Image: A warning label indicating a suffocation hazard from plastic bags, a recycling symbol, and a general warning sign.

  • Plastic Bag Warning: To avoid suffocation danger, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
  • Disposal: Please dispose of packaging materials responsibly and in accordance with local recycling guidelines.
  • General Warning: Pay attention to all warning symbols and instructions provided with the product and its packaging.

© 2024 YunYiYi. All rights reserved.

For further assistance, please contact YunYiYi customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.