MAST TATTOO Flash Rotary Tattoo Machine Kit User Manual

1. Product Overview

The MAST TATTOO Flash Rotary Tattoo Machine Kit provides a comprehensive solution for tattooing, featuring a lightweight rotary machine, power supply, needles, and essential accessories. Designed for smooth and efficient ink transfer, this kit is suitable for various tattooing styles.

Key Features:

• Complete kit including tattoo machine, power supply, 20 tattoo needles (1205RL/1207M1), 0.5 oz triple black ink, and essential accessories.
• Sleek, lightweight Mast Flash tattoo machine, exclusively compatible with cartridge needles.
• Reliable 3.5mm stroke length with an adjustable needle protrusion from 0mm to 4.5mm.
• Ergonomic cartridge grip with a 1" diameter, durable and autoclave-safe.
• Advanced gear system for smooth, soft, and quiet operation, suitable for all skin types.
• Efficient cartridge change and replacement for ease of use.

2. Kit Components

The Mast Flash Rotary Tattoo Machine Kit includes the following items:

• Mast Flash Rotary Tattoo Machine
• Tattoo Power Supply
• 20 Tattoo Cartridge Needles (1205RL/1207M1)
• 0.5 oz Triple Black Tattoo Ink
• Foot Pedal
• RCA Clip Cord
• Power Cord
• Grip Wrap
• Practice Skin

Figure 2.1: Complete Kit Contents

3. Setup Instructions

1. Connect Power Supply: Plug the power cord into the tattoo power supply and then into a suitable electrical outlet.
2. Connect Foot Pedal: Insert the foot pedal cable into the designated port on the power supply.
3. Connect Tattoo Machine: Attach the RCA clip cord to the RCA interface on the Mast Flash tattoo machine. Then, connect the other end of the RCA clip cord to the power supply.
   

   Figure 3.1: RCA Interface Connection
4. Install Cartridge Needle: Gently push a compatible cartridge needle into the machine's grip until it clicks securely into place. Ensure the needle is properly seated.
   

   Figure 3.2: Cartridge Needle Installation

5. Adjust Needle Depth: Rotate the cartridge grip to adjust the needle protrusion. The grip allows for adjustment from 0mm up to 4.5mm. Each turn or "click" adjusts the depth.

4. Operating Instructions

1. Power On: Turn on the tattoo power supply. The display will show the current voltage.
2. Adjust Voltage: Use the voltage adjustment knob on the power supply to set the desired working voltage. The Mast Flash machine operates between 4-10V.
   

   Figure 4.1: Machine Parameters and Voltage Range
3. Begin Tattooing: Press the foot pedal to activate the tattoo machine. Release the foot pedal to stop the machine.
4. Ink Application: Dip the needle cartridge into tattoo ink. The machine's advanced gear system ensures smooth and consistent ink transfer.
5. Needle Depth Adjustment During Operation: Fine-tune the needle depth by rotating the grip as needed during the tattooing process.

Video Demonstration:

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Mast Flash Rotary Tattoo Machine.

• Cleaning the Grip: The cartridge grip is durable and autoclave-safe. After each use, disassemble the grip from the machine and sterilize it according to standard tattooing hygiene practices.
• Machine Body Cleaning: Wipe the machine body with a clean, damp cloth and a mild disinfectant. Avoid submerging the machine in liquids.
• Needle Cartridges: Always use new, sterilized disposable needle cartridges for each client. Dispose of used cartridges safely in a sharps container.
• Storage: Store the tattoo machine and power supply in a clean, dry environment away from direct sunlight and extreme temperatures.

Figure 5.1: Durable Design for Longevity

6. Troubleshooting

If you encounter issues with your Mast Flash Rotary Tattoo Machine, refer to the following common troubleshooting steps:

• Machine Not Turning On:
  • Ensure all power connections are secure (power cord, foot pedal, RCA clip cord).
  • Verify the power supply is switched on and receiving power from the outlet.
  • Check the RCA clip cord for any damage or loose connections.
• Inconsistent Needle Movement:
  • Ensure the cartridge needle is correctly seated and locked into the grip.
  • Check for any debris or obstruction in the needle drive mechanism.
  • Verify the voltage setting on the power supply is appropriate for the needle type and task.
• Excessive Noise or Vibration:
  • Confirm the cartridge needle is properly installed.
  • Inspect the machine for any loose parts.
  • Ensure the grip is securely attached.

If problems persist after following these steps, please contact customer support.

7. Specifications

8. Warranty and Support

For warranty information, product support, or service inquiries, please contact the manufacturer, MAST TATTOO, or the seller directly. Retain your proof of purchase for any warranty claims.

Manufacturer: MAST TATTOO

Seller: Mast Direct