Intex Pineapple Baby Pool Instruction Manual

1. Product Overview

The Intex Pineapple Baby Pool is designed for young children aged 1 to 3 years. It features a built-in sunshade for partial protection from sunlight and a soft inflatable floor for comfort. The pool has an approximate water capacity of 12 gallons (45 liters) with a 5-inch wall height. Inflated dimensions are approximately 40 inches (102 cm) long by 37 inches (94 cm) wide.

Image 1: Overview of the Intex Pineapple Baby Pool, highlighting its soft inflatable floor and recommended age range of 1-3 years. Approximate inflated size is 39in x 37in (99cm x 94cm).

2. Safety Information

WARNING: ADULT SUPERVISION REQUIRED AT ALL TIMES.

This is not a life-saving device. Children can drown in very small amounts of water. Empty the pool when not in use. Do not install the paddling pool over concrete, asphalt, or any other hard surface. Keep children within arm's reach. See product for additional warnings and safety labels.

3. Setup Instructions

1. Choose a Location: Select a level, soft surface (such as grass) for setting up the pool. Ensure there are no sharp objects or debris that could puncture the pool. Avoid concrete, asphalt, or other hard surfaces.
2. Unfold the Pool: Carefully remove the pool from its packaging and unfold it completely on the chosen surface.
3. Inflate the Pool: The pool has multiple air chambers. Locate the inflation valves for the main ring, the soft inflatable floor, and the built-in sunshade. Use an air pump (not included) to inflate each chamber until it is firm to the touch but not over-inflated. Ensure all valves are securely closed after inflation.
4. Fill with Water: Once fully inflated, fill the pool with water to the recommended level, which is approximately 5 inches (13 cm) of wall height, or 12 gallons (45 liters). Do not overfill.

Image 2: The Intex Pineapple Baby Pool in use, illustrating the built-in sunshade for partial protection and the soft inflatable floor. It also mentions the approximate water capacity of 12 gallons (45L) and the importance of setting up on level ground.

4. Operating Instructions

Once the pool is set up and filled, children can enjoy splashing and playing. The built-in sunshade offers partial protection from direct sunlight. Always ensure an adult is actively supervising children in and around the pool.

5. Maintenance

• Cleaning: Regularly clean the pool with mild soap and water. Rinse thoroughly. Do not use abrasive cleaners or brushes.
• Draining: To drain the pool, open the drain valve (if present) or carefully tip the pool to empty the water.
• Drying: Ensure the pool is completely dry before deflating and storing to prevent mold and mildew.
• Storage: Deflate all air chambers, fold the pool neatly, and store it in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from sharp objects.

6. Troubleshooting

• Slow Deflation: If the pool slowly deflates, check all inflation valves to ensure they are securely closed. Inspect the pool surface for small punctures. A repair patch is typically included with the product for minor repairs.
• Uneven Inflation: Ensure all air chambers are inflated evenly. If one section appears softer, add more air to that specific chamber.
• Water Leakage: Check for visible tears or holes. Use the provided repair patch according to its instructions to seal any leaks.

7. Specifications

8. Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact Intex customer service directly. Specific warranty details are not provided in this manual.