Introduction
The BISSELL Spotclean Professional is a compact and powerful portable carpet and upholstery deep cleaner designed for superior cleaning results. It effectively removes stubborn dirt and tough stains from various surfaces including carpets, upholstery, stairs, and area rugs. This manual provides essential information for the safe and efficient operation and maintenance of your cleaner.
Image: The BISSELL Spotclean Professional Portable Carpet and Upholstery Deep Cleaner, Model 2891B, in blue.
Safety Information
Always read and follow all instructions before using your BISSELL Spotclean Professional. This includes understanding electrical safety, proper handling of cleaning solutions, and safe operation on different surfaces. Keep children and pets away from the cleaner during operation. Do not immerse the appliance in water or other liquids.
What's in the Box
Your BISSELL Spotclean Professional package includes the following components:
- BISSELL Spotclean Professional Portable Carpet And Upholstery Deep Cleaner unit
- 5-foot hose with 3-inch Tough Stain Brush
- 3-in-1 Stair Tool
- HydroRinse Self-Cleaning Tool
- Trial size BISSELL PRO MAX Clean and Protect formula (8 oz)
- Trial size OXY Boost formula (8 oz)
Image: A user preparing the cleaner by filling the clean water tank.
Setup
- Fill the Clean Water Tank: Remove the clean water tank from the unit. Unscrew the cap and fill the tank with hot tap water up to the indicated fill line. Add the recommended amount of BISSELL cleaning formula (trial size PRO MAX Clean and Protect or OXY Boost) as per the instructions on the formula bottle. Securely replace the cap and reattach the tank to the unit.
- Attach the Desired Tool: Connect the flexible hose to the cleaner unit. Select the appropriate cleaning tool (3-inch Tough Stain Brush, 3-in-1 Stair Tool, or HydroRinse Self-Cleaning Tool) and securely attach it to the end of the hose.
- Power Connection: Unwind the 22-foot power cord and plug the cleaner into a grounded electrical outlet.
Operating Instructions
Before cleaning, vacuum the area to remove any loose dirt or debris. For best results, pre-treat tough stains with BISSELL pre-treatment solutions.
- Power On: Press the red power button located on the top of the unit to turn on the cleaner.
- Spray Cleaning Solution: Hold the selected tool directly over the stained area. Press the spray trigger on the tool handle to release the cleaning solution onto the stain. Ensure the area is adequately saturated.
- Scrub the Stain: Gently scrub the stained area with the brush on the cleaning tool. Use back-and-forth motions to work the solution into the carpet or upholstery fibers.
- Vacuum the Dirty Water: Release the spray trigger and tilt the tool slightly to engage the suction nozzle. Slowly pull the tool over the treated area to vacuum up the dirty solution. Repeat this step until no more dirty water can be extracted.
- Repeat if Necessary: For stubborn stains, repeat steps 2-4 until the stain is removed.
Using Specialized Tools:
- 3-inch Tough Stain Tool: Ideal for general spot cleaning on carpets and upholstery.
- 3-in-1 Stair Tool: Designed to clean the outer curves, corners, and treads of carpeted staircases.
- HydroRinse Self-Cleaning Tool: Use this tool to rinse the hose after each use, ensuring the hose remains clean and free of odors.
Image: A user cleaning carpeted stairs with the specialized stair tool.
Image: A user cleaning upholstery with the BISSELL Spotclean Professional.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your cleaner.
- Empty and Rinse Dirty Water Tank: After each use, remove the dirty water tank from the unit. Open the tank and pour out the dirty water. Rinse the tank thoroughly with clean water and allow it to air dry before reattaching.
- Rinse Clean Water Tank: If there is any remaining solution, empty it and rinse the clean water tank with fresh water.
- Clean Tools and Hose:
- Remove any attached cleaning tools and rinse them under running water.
- Attach the HydroRinse Self-Cleaning Tool to the hose. Turn on the machine and press the spray trigger while holding the HydroRinse tool over a sink. This will flush clean water through the hose, cleaning out any residue. Continue until the water runs clear.
- Wipe Down Unit: Wipe the exterior of the cleaner unit with a soft cloth to remove any dirt or residue.
- Store Properly: Wrap the power cord neatly and store the cleaner and its tools in a dry, safe place.
Image: The HydroRinse Self-Cleaning Tool for easy hose maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Not plugged in; Blown fuse/tripped breaker | Ensure unit is securely plugged into a working outlet; Check/reset fuse or breaker. |
| No Spray | Clean water tank empty; Tank not seated properly; Spray nozzle clogged | Refill clean water tank; Re-seat tank firmly; Clean spray nozzle. |
| Reduced Suction | Dirty water tank full; Dirty water tank lid not sealed; Hose/tool clogged | Empty dirty water tank; Ensure tank lid is securely fastened; Clear any clogs from hose or tool. |
Specifications
- Model Name: SpotClean Pro
- Power Source: Corded Electric (5.9 Amp)
- Product Dimensions: 25.4D x 35.6W x 35.6H Centimetres
- Power Cord Length: 22 ft
- Hose Length: 5 ft
- Tank Capacity: 3/4 gallon (approx. 2.8 liters)
- Included Components: BISSELL Spotclean Professional Portable Carpet And Upholstery Deep Cleaner, 3" Tough Stain Brush, 3-In-1 Stair Tool, Hydro-Rinse Self-Cleaning Tool
- Manufacturer: BISSELL International Trading Company B.V.
- ASIN: B08DBW17HD
- UPC: 011120258486
Warranty & Support
This product comes with a 5 Year Limited Warranty. For warranty claims, product support, or to purchase additional cleaning formulas and accessories, please visit the official Bissell website or contact their customer service. You can also visit the Bissell Store on Amazon.