VocoPro Smart TV Stay-at-Home Karaoke Package

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your VocoPro Smart TV Stay-at-Home Karaoke Package. Please read this manual thoroughly before using the product to ensure proper function and longevity. This package is designed to integrate with your internet-enabled Smart TV for an enhanced home karaoke experience.

Image 1.1: Overview of the VocoPro Smart TV Stay-at-Home Karaoke Package components. This includes the multi-effect DJ light, the SmartTVOke karaoke mixer, two wireless microphones, and the PV-Wedge powered monitor speaker.

2. Setup

1. Unpacking: Carefully remove all components from the packaging. Verify that all items listed in the 'Included Components' section are present.
2. SmartTVOke Mixer Connection to TV:
   • Connect the SmartTVOke mixer to your Smart TV's audio output. Use either the digital optical output (PCM Only) or the 1/8" headphone output.
   • Ensure the TV's audio output settings are configured correctly for the chosen connection type.
3. SmartTVOke Mixer Connection to PV-Wedge Speaker:
   • Connect the audio output of the SmartTVOke mixer to the input of the PV-Wedge powered monitor speaker using a 1/8" stereo or RCA cable.
4. Wireless Microphone Setup:
   • Insert fresh batteries into each wireless microphone.
   • The microphones are pre-paired with the SmartTVOke mixer. Power them on, and they should automatically connect.
5. DJ Light Placement:
   • Position the DJ light in a suitable location to achieve desired lighting effects. Ensure it is stable and secure.
6. Power Connections:
   • Connect the power adapters to the SmartTVOke mixer, PV-Wedge speaker, and DJ light.
   • Plug all power adapters into appropriate electrical outlets.

3. Operating Instructions

3.1. SmartTVOke Karaoke Mixer

• Power On/Off: Use the power button to turn the unit on or off.
• Input Selection: Select between digital optical input or 1/8" analog input based on your TV connection.
• Volume Control: Adjust the master music volume and individual microphone volumes using the dedicated controls.
• Effect Control: Adjust echo and other vocal effects to enhance your singing.

3.2. Wireless Microphones

• Power On/Off: Press and hold the power button on the microphone to turn it on or off.
• Volume Control: Use the volume buttons on the microphone to adjust your individual vocal level.
• Effect Control: Use the effect buttons on the microphone to apply or adjust vocal effects.
• Battery Replacement: When the battery indicator is low, replace the batteries with new ones.

3.3. PV-Wedge Powered Monitor Speaker

• Power On/Off: Use the power switch on the speaker to turn it on or off.
• Volume/Tone Controls: Adjust the overall output volume and tone (bass/treble) of the speaker for optimal sound.

3.4. DJ Light

• Power On/Off: Use the power switch to activate or deactivate the light.
• Mode Selection: Select desired lighting effects such as Moonflower, Water Wave, Strobe, UV/Black Light, or Laser using the controls on the unit.

3.5. Using with Smart TV Karaoke Apps

• Access your preferred karaoke application (e.g., YouTube, dedicated karaoke apps) on your Smart TV.
• Select a song and ensure the TV's audio is routed through the SmartTVOke mixer and PV-Wedge speaker.
• Adjust microphone and music volumes for a balanced mix.

4. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior surfaces of all components. Avoid using liquid cleaners or abrasive materials.
• Storage: When not in use for extended periods, store the package in a cool, dry place away from direct sunlight and extreme temperatures.
• Microphone Battery Care: Remove batteries from the wireless microphones if they will not be used for a long time to prevent leakage.

5. Troubleshooting

• No Sound from Speaker:
  • Ensure all power cables are securely connected and units are powered on.
  • Check audio cables between the TV, SmartTVOke, and PV-Wedge speaker.
  • Verify TV audio output settings (PCM Only for optical).
  • Increase volume levels on the TV, SmartTVOke, and PV-Wedge speaker.
• Microphones Not Working:
  • Check microphone batteries and replace if necessary.
  • Ensure microphones are powered on.
  • Verify microphone volume levels on both the microphone and the SmartTVOke mixer.
• DJ Light Not Functioning:
  • Ensure the DJ light is powered on and connected to a working outlet.
  • Check for any obstruction to the light output.
• Distorted Audio:
  • Reduce volume levels on the TV, SmartTVOke, or PV-Wedge speaker to prevent clipping.
  • Check cable connections for any damage or loose connections.

6. Specifications

• Model Number: Smart TV Stay-at-Home Karaoke Package
• Package Dimensions: 38.5 x 22.5 x 16 inches
• Item Weight: 34.3 pounds
• Power Source: Battery Powered (for microphones), AC Power (for mixer, speaker, light)
• Speaker Count: 1 (PV-Wedge 2.1 Monitor with Stereo Speaker and Subwoofer)
• Included Components: VocoPro - Home Karaoke Club system Package (VCOSmart TV Stay-At-Home)
• Mixer Compatibility: Digital optical output (PCM Only), 1/8" stereo or RCA input
• Speaker Output: 100W
• DJ Light Effects: Moonflower, Water Wave, Strobe, UV/Black Light, Laser

7. Warranty Information

For detailed warranty information regarding your VocoPro Smart TV Stay-at-Home Karaoke Package, please refer to the official VocoPro website or the warranty card included with your product packaging. Warranty terms and conditions may vary.

8. Support

If you require further assistance or have questions not covered in this manual, please visit the official VocoPro support website or contact their customer service department. Contact information can typically be found on the VocoPro website or product packaging.