Introduction
This document provides comprehensive instructions for the installation, operation, and maintenance of your TOPPIN TPAP001 Air Purifier Replacement Filter. This 4-in-1 filter is designed to work exclusively with the TOPPIN TPAP001 Air Purifier, ensuring optimal performance and air quality.
The filter system includes a nylon pre-filter, an H13 True HEPA filter, and an activated carbon layer, effectively removing up to 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, smoke, and odors.
Image 1: TOPPIN TPAP001 Replacement Filter. This cylindrical filter features a white pleated HEPA layer and a red "TOPPIN GENUINE" seal, indicating its authenticity and compatibility with the TPAP001 air purifier.
Product Features
- 3-in-1 Filtration System: Combines a pre-filter, H13 True HEPA filter, and activated carbon filter for comprehensive air purification.
- High Efficiency: Captures up to 99.97% of airborne particles as small as 0.3 microns.
- Odor Reduction: Activated carbon layer effectively absorbs smoke, cooking odors, and pet odors.
- Compatibility: Specifically designed for the TOPPIN TPAP001 Air Purifier.
Image 2: Compatible TOPPIN Air Purifier (Model TPAP001). This image displays the sleek, white TOPPIN air purifier, highlighting its design and the model number TPAP001, confirming the filter's intended use.
Setup and Installation
Follow these steps to correctly install your new replacement filter:
- Prepare the Filter: Before installation, remove the new filter from its plastic packaging.
- Access the Filter Compartment: Twist open the base cover of your TOPPIN TPAP001 Air Purifier.
- Remove Old Filter: Carefully remove the used or dirty filter from the air purifier.
- Insert New Filter: Place the new filter into the air purifier, ensuring it is seated correctly.
- Secure Base Cover: Twist and lock the base cover back into place.
Image 3: Step-by-step guide for replacing the filter. This visual aid illustrates twisting the base, removing the old filter, unwrapping the new filter, inserting it, locking the base, and finally, resetting the filter button.
Operating Instructions
After replacing the filter, it is crucial to reset the filter indicator on your air purifier:
- Reset Filter Button: Press and hold the "Filter" button on the air purifier for 5 seconds until you hear a beep. This action resets the filter life timer and turns off the filter replacement indicator light.
Video 1: TOPPIN HEPA Air Purifier True H13 TPAP001 Filter. This video demonstrates the installation and reset process for the TPAP001 filter, providing a visual guide to ensure correct setup and operation.
Maintenance
- Filter Cleaning: It is recommended to clean the pre-filter once each month by gently brushing off any visible dust or dirt. Avoid disturbing the interior fibers of the HEPA filter.
- Filter Replacement: Filters should be replaced at least once every 3 to 6 months. More frequent cleaning and replacement may be necessary depending on environmental conditions and usage.
- Important Note: The filter is not washable. Do not immerse any part of the air purifier or filter in water, as this will cause damage.
Troubleshooting
If the filter indicator light remains on after replacing the filter, ensure you have performed the filter reset procedure correctly:
- Filter Light Not Resetting: After installing the new filter, power on the air purifier. Then, press and hold the "Filter" button for 5 seconds until you hear a beep. The red filter light should then turn off. If it persists, repeat the steps or consult the main air purifier manual.
Specifications
| Feature | Detail |
|---|---|
| Model Number | TPAP001 |
| Filter Type | 4-in-1 (Pre-Filter, H13 True HEPA, Activated Carbon) |
| Filtration Efficiency | Removes up to 99.97% of particles as small as 0.3 microns |
| Material | Nylon (Pre-Filter) |
| Recommended Replacement | Every 3 to 6 months |
| Product Dimensions | 5.94 x 5.94 x 7.76 inches |
| Item Weight | 13.76 ounces (390 Grams) |
| UPC | 782943473935 |
Warranty and Support
To ensure the continued optimal performance and validity of any product warranty for your TOPPIN Air Purifier, always use genuine TOPPIN replacement filters. Using non-genuine filters may void your product warranty and could affect the air purifier's efficiency and lifespan.
For further assistance or inquiries, please refer to the official TOPPIN website or contact customer support.
