Introduction
Thank you for choosing the Naztech Driver ANC 1000 Bluetooth Headphones. These headphones are designed to provide a superior audio experience with active noise cancellation, comfortable over-ear design, and long-lasting battery life. This manual will guide you through the setup, operation, and maintenance of your new headphones to ensure optimal performance.
What's in the Box
- Naztech Driver ANC 1000 Bluetooth Headphones
- User Manual
- Charging Cable (USB-C)
- 3.5mm Audio Cable
- Hard Shell Travel Case
Product Overview
Familiarize yourself with the various components and controls of your Naztech Driver ANC 1000 headphones.
Image: Detailed view of headphone controls and features.
Controls and Indicators
- Volume Control +: Increase volume.
- Multi-Function / Power Button: Power on/off, play/pause, answer/end calls, activate voice assistant.
- Volume Control -: Decrease volume.
- 3.5mm AUX Port: For wired audio connection.
- USB-C Charging Port: For charging the headphones.
- ANC Toggle Switch: Activates or deactivates Active Noise Cancelling.
- LED Indicator: Shows power, charging, and Bluetooth status.
Setup
Charging the Headphones
Before first use, fully charge your headphones. A full charge takes approximately 2 hours.
- Connect the USB-C charging cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicator will show charging status (e.g., red while charging, blue when fully charged).
Image: Headphones connected for charging, highlighting quick charge capability.
Image: Product packaging emphasizing quick charge and ANC features.
Bluetooth Pairing
Pair your headphones with your device for wireless audio.
- Ensure the headphones are charged and powered off.
- Press and hold the Multi-Function / Power Button for approximately 3-5 seconds until the LED indicator flashes blue and red, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for new devices.
- Select "Naztech Driver ANC 1000" from the list of available devices.
- Once connected, the LED indicator will flash blue slowly.
Operating Instructions
Power On/Off
- Power On: Press and hold the Multi-Function / Power Button for 2 seconds.
- Power Off: Press and hold the Multi-Function / Power Button for 3 seconds.
Music Playback
- Play/Pause: Short press the Multi-Function / Power Button.
- Volume Up: Short press the Volume Control + button.
- Volume Down: Short press the Volume Control - button.
- Next Track: Long press the Volume Control + button.
- Previous Track: Long press the Volume Control - button.
Call Management
- Answer/End Call: Short press the Multi-Function / Power Button.
- Reject Call: Long press the Multi-Function / Power Button.
- Activate Voice Assistant: Double press the Multi-Function / Power Button.
Active Noise Cancelling (ANC)
The ANC 1000 features patented Noise Hush Active Noise Cancelling technology to reduce ambient noise.
Image: Features of the headphones including ANC, microphone, and travel design, with battery life details.
- Activate ANC: Slide the ANC Toggle Switch to the 'ON' position. The ANC indicator light will illuminate.
- Deactivate ANC: Slide the ANC Toggle Switch to the 'OFF' position. The ANC indicator light will turn off.
Note: Using ANC will slightly reduce overall battery life. The headphones offer up to 30 hours of playtime with ANC on and up to 50 hours with ANC off.
Wired Mode
You can use the headphones with the included 3.5mm audio cable when the battery is low or with non-Bluetooth devices.
- Connect one end of the 3.5mm audio cable to the AUX port on the headphones.
- Connect the other end to the audio output of your device.
- Note: ANC functionality may still be used in wired mode if the headphones have battery power.
Maintenance
- Cleaning: Wipe the headphones with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the headphones in the provided hard shell travel case to protect them from dust and damage.
- Battery Care: To preserve battery life, charge the headphones at least once every three months if not used regularly. Avoid extreme temperatures.
Image: Headphones folded and stored in their travel case.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones won't turn on | Low battery | Charge the headphones fully. |
| Cannot pair with device | Headphones not in pairing mode; Device Bluetooth off; Too far from device | Ensure headphones are in pairing mode (flashing blue/red). Turn on device Bluetooth. Move headphones closer to device (within 33 ft). |
| No sound | Volume too low; Not connected; Wrong audio source | Increase volume on headphones and device. Re-pair headphones. Check device's audio output settings. |
| ANC not effective | ANC switch off; Very high-frequency noise | Ensure ANC switch is ON. ANC is most effective on low-frequency, constant noises. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | 15136 |
| Connectivity Technology | Wireless (Bluetooth 5.0) |
| Headphones Jack | 3.5 mm Jack |
| Noise Control | Active Noise Cancellation |
| Battery Life (ANC Off) | Up to 50 Hours |
| Battery Life (ANC On) | Up to 30 Hours |
| Charging Time | 2 Hours |
| Bluetooth Range | 10 Meters (33 ft) |
| Frequency Range | 2.4 Hz to 2.48 kHz |
| Item Weight | 0.93 Kilograms (2.05 pounds) |
| Product Dimensions | 3.2 x 7.5 x 8.8 inches |
| Ear Placement | Over Ear |
| Included Components | User Manual |
Warranty and Support
Naztech products are designed for durability and performance. For warranty information and customer support, please refer to the warranty card included with your product or visit the official Naztech website. Keep your purchase receipt for warranty claims.
For further assistance, please contact Naztech customer service through their official channels.
