INTEX Deluxe Pressure-Side Above Ground Automatic Pool Cleaner Vacuum

1. Introduction and Overview

The INTEX Deluxe Pressure-Side Automatic Pool Cleaner (Model ZX300) is designed to provide efficient and convenient cleaning for above-ground pools. This hydraulic-powered cleaner connects directly to your pool's inlet fitting, utilizing water pressure to generate powerful suction and propel itself across the pool floor and walls. It is engineered to remove debris, ensuring a cleaner and more enjoyable swimming environment.

This cleaner is suitable for Intex and other above-ground pools up to 26 feet in diameter for round pools or 36 feet by 12 feet for rectangular pools. It requires a pool pump with a flow rate between 1,600 and 3,500 gallons per minute (GPM) for optimal performance.

Image: The INTEX ZX300 Deluxe Pressure-Side Automatic Pool Cleaner, a white and teal unit with brushes at the front and wheels on the sides.

2. Safety Information

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Always follow basic safety precautions when installing and using this product. Ensure your pool pump is turned off and disconnected from power before connecting or disconnecting the cleaner. Keep children and pets away from the pool area during operation. Do not operate the cleaner if it is damaged or malfunctioning. Refer to your pool pump's manual for additional safety guidelines.

3. Product Features

• Automatic Cleaning: Simply connect to the pool inlet fitting; powerful 700 gal/hour water suction is generated within the cleaner itself.
• Pool and Pump Compatibility: Designed for INTEX and other above-ground pools up to 26ft diameter (round) or 36ft x 12ft (rectangular). Works with pool pumps rated 1,600 - 3,500 gallons per minute water flow.
• Effective Debris Removal: Features dual dirt scrubbers for cleaning fine and hard-to-remove dirt up to the waterline.
• Water-Powered All-Wheel Drive: Provides superior wall-climbing performance and efficient movement across the pool floor.
• Tangle-Free Hose: Includes a 21-foot tangle-free hose for unhindered operation.
• Removable Filter Tray: Equipped with a large debris canister (0.48 gal capacity) and a fine 6-gauge mesh filter for easy cleaning.

Image: Diagram illustrating key features like pump compatibility (1600-3500 gal/h), pool size suitability (up to 26ft round, 32ft x 12ft rectangular), easy setup, and pressure-side cleaning.

Image: Close-up views of the cleaner's rotating dual dirt scrubbers, water-powered all-wheel drive, and the large debris canister with 0.48 gallon capacity.

4. Specifications

Image: Visual representation of key specifications including 700 gal/hour suction, 7 meters per minute cleaning speed, 6-gauge mesh filter, and 21ft 4in non-tangle hose.

Image: Icons detailing required pump flow rate (1600-3500 GPH), pool compatibility (up to 26ft round, 36ft x 12ft rectangular), dimensions (16.9" x 15.8" x 18.9"), and weight (12.45 pounds).

5. Setup

1. Prepare Your Pool: Ensure your pool is free of large debris that could clog the cleaner. Turn off and unplug your pool filter pump before proceeding.
2. Connect the Hose: Attach the provided 21-foot tangle-free hose to the cleaner's inlet. Ensure a secure connection to prevent leaks and maintain suction.
3. Connect to Pool Inlet: Connect the other end of the hose to your pool's inlet fitting. The cleaner comes with a 1-1/4" converter for compatibility. Ensure the connection is tight.
4. Submerge the Cleaner: Carefully lower the cleaner into the pool, allowing it to fill with water and sink to the bottom. Ensure no air is trapped inside the unit or the hose.
5. Start the Pump: Once the cleaner is fully submerged and connected, plug in and turn on your pool filter pump. The cleaner will begin to operate as water flows through it.

Image: A person connecting the hose of the Intex pool cleaner to the pool's inlet fitting, demonstrating the easy setup process.

6. Operation

The INTEX ZX300 operates automatically once connected to a running pool pump. The water pressure from your pump drives the cleaner's internal mechanism, creating powerful suction and propelling the unit. Its water-powered all-wheel drive allows it to move across the pool floor and climb walls, ensuring comprehensive cleaning.

• The cleaner will move randomly across the pool surface, covering the entire area.
• Dual dirt scrubbers actively loosen and collect debris as the cleaner moves.
• The powerful 700 gal/hour suction draws in dirt and debris, which are then trapped in the internal filter tray.
• The cleaner can reach speeds of up to 7 meters per minute, efficiently cleaning your pool.

Image: The Intex ZX300 automatic pool cleaner submerged and actively cleaning the floor of an above-ground pool.

7. Maintenance

Regular maintenance of your ZX300 pool cleaner is essential for optimal performance and longevity.

1. Empty the Filter Tray: The cleaner's removable filter tray should be emptied regularly, especially after each cleaning cycle or when you notice a decrease in suction. To do this, turn off and unplug your pool pump, remove the cleaner from the pool, open the debris canister, and dispose of the collected debris.
2. Clean the Filter Mesh: Rinse the 6-gauge mesh filter thoroughly with a garden hose to remove any fine particles.
3. Inspect Brushes and Wheels: Periodically check the dual dirt scrubbers and wheels for wear or damage. Ensure they rotate freely and are not obstructed by debris. Replace worn parts as necessary.
4. Check Hose: Inspect the 21-foot tangle-free hose for any kinks, tears, or blockages. A damaged hose can affect the cleaner's performance.
5. Storage: When not in use for extended periods, clean the unit thoroughly, allow it to dry completely, and store it in a cool, dry place away from direct sunlight and extreme temperatures.

Image: The underside of the Intex ZX300 cleaner, highlighting the dual rotating brushes and the accessible filter tray for easy maintenance.

8. Troubleshooting

9. Warranty and Support

The INTEX Deluxe Pressure-Side Automatic Pool Cleaner (Model ZX300) comes with a 1-Year Manufacturer Limited Warranty. Please retain your proof of purchase for warranty claims.

For detailed instructions, troubleshooting, and replacement parts, you can refer to the official User Manual PDF available online or visit the Intex brand store.

• Official User Manual (PDF): Download PDF
• Visit the Intex Store: Intex Official Store on Amazon