1. Introduction
This user manual provides comprehensive instructions for the Blackmagic Design Video Assist 7 3G Monitor/Recorder. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the product.
The Blackmagic Video Assist 7 3G is a versatile monitor and recorder designed for professional video production, offering high-quality monitoring and recording capabilities in a compact form factor.
2. Product Overview
The Blackmagic Video Assist 7 3G combines a bright 7-inch display with professional recording features, allowing you to monitor and record video from virtually any camera. It supports various video formats and offers advanced monitoring tools.

Figure 2.1: Front view of the Blackmagic Design Video Assist 7 3G, showing the 7-inch display with an active video feed, on-screen controls, and monitoring overlays like waveform and audio meters. The screen displays a person in a kitchen setting.

Figure 2.2: Rear view of the Blackmagic Design Video Assist 7 3G, highlighting the dual battery slots for continuous power and the central cooling fan for thermal management during operation.
Key Features:
- 7-inch 3G-SDI/HDMI Monitor and Recorder
- High-resolution display for accurate monitoring
- Records to SD cards
- Professional scopes and monitoring tools
- Dual battery slots for extended power
- Durable black finish
3. Setup
3.1 Unboxing and Initial Inspection
Carefully remove the Video Assist from its packaging. Inspect the device for any signs of damage. Ensure all components listed in the packing slip are present.
3.2 Powering the Device
The Video Assist 7 3G can be powered using the included AC power adapter or via two compatible L-series batteries (not included). Insert fully charged batteries into the rear battery slots, ensuring they click into place. For continuous operation, connect the AC power adapter to the DC input port and a power outlet.
3.3 Inserting an SD Card
Locate the SD card slot on the side of the device. Insert a compatible SD card (UHS-I or UHS-II recommended for recording) with the label facing up until it clicks into place. The device will format the card upon first use or if a new card is detected.
3.4 Connecting to a Camera
Connect your camera's HDMI or SDI output to the corresponding input port on the Video Assist using a high-quality cable. The Video Assist will automatically detect the input signal. Ensure your camera's video output settings match the supported formats of the Video Assist.
4. Operating Instructions
4.1 Navigating the Touchscreen Interface
The Video Assist features an intuitive touchscreen interface. Tap icons to select functions, swipe to navigate menus, and pinch-to-zoom on the waveform monitor. The main screen displays the video feed, recording status, and various monitoring tools.
4.2 Recording Video
- Ensure an SD card is inserted and formatted.
- Select your desired recording codec and format from the settings menu.
- Press the Record button (red circle icon) on the touchscreen to start recording.
- Press the Stop button (square icon) to end recording.
4.3 Monitoring Tools
The Video Assist provides professional monitoring tools accessible via the touchscreen:
- Waveform: Displays the luminance levels of your video signal.
- Vectorscope: Shows the color information and saturation.
- Histogram: Illustrates the distribution of pixels across the tonal range.
- Zebra: Highlights overexposed areas.
- Focus Peaking: Assists in achieving sharp focus by highlighting in-focus edges.
4.4 Playback
To review recorded footage, tap the Playback icon. You can then select clips, play, pause, fast-forward, and rewind using the on-screen controls.
5. Maintenance
5.1 Cleaning
Use a soft, lint-free cloth to clean the screen and body of the Video Assist. For stubborn marks, dampen the cloth slightly with water or a screen-safe cleaning solution. Avoid abrasive materials or harsh chemicals.
5.2 Battery Care
To maximize battery life, store batteries in a cool, dry place when not in use. Avoid fully discharging lithium-ion batteries frequently. Recharge them regularly, even if not completely depleted.
5.3 Firmware Updates
Periodically check the Blackmagic Design website for firmware updates. Updates can improve performance, add new features, and fix bugs. Follow the instructions provided by Blackmagic Design for safe firmware installation.
5.4 Storage
When not in use, store the Video Assist in a protective case to prevent dust and physical damage. Avoid extreme temperatures and high humidity.
6. Troubleshooting
Common Issues and Solutions:
- No Signal on Screen:
- Check HDMI/SDI cable connections.
- Ensure camera output settings match Video Assist input capabilities.
- Verify camera is powered on and outputting video.
- Cannot Record:
- Check if an SD card is inserted and properly formatted.
- Ensure the SD card has sufficient free space.
- Verify the SD card speed rating meets recording requirements.
- Check recording format settings.
- Battery Not Charging:
- Ensure the AC power adapter is securely connected to the device and a working power outlet.
- Check if the batteries are inserted correctly.
- Try a different power outlet or AC adapter if available.
- Device Freezes/Unresponsive:
- Perform a soft reset by holding the power button until the device turns off, then restart.
- If persistent, remove batteries and AC power, wait a few seconds, then reconnect.
If issues persist, refer to the Blackmagic Design support website or contact customer service.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Blackmagic Design |
| Model Number | OB02656 |
| Color | Black |
| Screen Size | 7 Inches |
| Connectivity Technology | HDMI, Wi-Fi (Note: Wi-Fi not explicitly mentioned for data transfer in product description, primarily HDMI/SDI for video) |
| Compatible Devices | Camera |
| Battery Composition | Lithium-ion (requires 1 battery) |
| Rechargeable Battery | No (refers to included battery, but device uses rechargeable L-series batteries) |
| Spare Parts Availability | 2 Years |
| Item Weight | 3 Pounds (approx. 1.36 kg) |
| Digital Video Media Format | SD Card |
8. Warranty and Support
The Blackmagic Design Video Assist 7 3G Monitor/Recorder comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. Spare parts are indicated to be available for 2 years from the date of purchase.
For technical support, firmware updates, or additional resources, please visit the official Blackmagic Design support website: www.blackmagicdesign.com/support
Always ensure you are using the latest firmware for optimal performance and compatibility.