EverNary Dog Doorbell User Manual

Introduction

The EverNary Wireless Dog Doorbell is designed to assist in potty training and communication for your pet. It provides a simple, effective way for dogs to signal when they need to go outside, reducing barking, scratching, or whining at the door. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Safety Information

• Keep the device away from excessive heat, direct sunlight, and moisture.
• Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
• Ensure the receiver is plugged into a standard electrical outlet with appropriate voltage.
• Avoid placing the transmitter near strong magnetic or electric fields, as this may cause interference or false alarms.

Package Contents

Your EverNary Dog Doorbell package includes the following components:

• 1 x Wireless Receiver
• 2 x Wireless Transmitters
• Mounting accessories (e.g., Velcro)
• User Manual

Figure 1: EverNary Dog Doorbell components (Receiver and Transmitters).

Product Overview

The EverNary Dog Doorbell system consists of a plug-in receiver and one or more wireless, touch-sensitive transmitters. The transmitters are designed to be easily activated by a pet's nose or paw, signaling the receiver to play a chosen chime.

Figure 2: Dimensions of the Receiver and Transmitter.

Figure 3: Transmitter features including IP55 waterproof rating and wide temperature range.

Setup Instructions

1. Installing the Transmitter

1. Choose a suitable location for the transmitter, such as near the door your pet uses to go outside. Ensure it's easily accessible for your pet to touch with their nose or paw.
2. Clean the surface where you intend to place the transmitter.
3. Attach the provided Velcro to the back of the transmitter button.
4. Securely stick the transmitter to the desired location (door, wall, floor, or a board).

Figure 4: Transmitter installation using Velcro.

2. Setting up the Receiver

1. Plug the receiver into any standard electrical outlet within range of the transmitter. The operating range is 800+ feet in open areas.

3. Pairing the Devices (if necessary)

The devices are typically pre-paired. If re-pairing is needed or you add new transmitters:

1. On the receiver, press and hold the pairing button (usually labeled with a bell icon) for 5 seconds until an indicator light flashes or a specific sound is heard, indicating it's in pairing mode.
2. Within a few seconds, activate the transmitter by touching its surface. The receiver should chime, confirming successful pairing.

Figure 5: Receiver buttons for chime selection, volume, and pairing.

Operating Instructions

1. Pet Usage

The EverNary Dog Doorbell is designed for easy activation. Your pet simply needs to lightly touch or slip over the touchpad with their nose or paw to activate the wireless doorbell. No significant pressure is required, making it suitable for dogs and cats of all sizes.

Figure 6: Dog activating the doorbell transmitter.

2. Adjusting Chime and Volume

• Chime Selection: Use the "Forward" and "Backward" buttons on the receiver to cycle through the 55 available ringtones.
• Volume Control: Press the volume control button to adjust the volume level. There are 5 levels, ranging from 0dB (mute mode) to 110dB.

3. Potty Training Tips

To effectively train your dog to use the doorbell:

• Consistency is Key: Every time you take your dog outside for potty breaks, guide their paw or nose to touch the transmitter button.
• Immediate Reward: As soon as your dog activates the doorbell, praise them enthusiastically and immediately open the door to go outside. This creates a positive association.
• Verbal Cue: Use a consistent verbal cue like "Outside" or "Potty" when your dog rings the bell and you open the door.
• Patience: Training takes time. Be patient and consistent, and your dog will learn to associate the doorbell with going outside.

Figure 7: The doorbell is suitable for all dog sizes.

Maintenance

• Cleaning: Wipe the receiver and transmitter with a soft, dry cloth. Do not use abrasive cleaners or immerse the devices in water.
• Waterproof Rating: The transmitter has an IP55 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand splashes, it should not be submerged.
• Temperature Range: The transmitter is designed to operate in temperatures from -30°C to +70°C.

Troubleshooting

Specifications

Warranty and Support

The EverNary Dog Doorbell comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any questions regarding your product, please contact EverNary customer service through the retailer's platform or the official EverNary website.

For additional resources and product information, you may visit the EverNary Store on Amazon.