1. Introduction
The FLEXISPOT Under Desk Cable Management Tray is designed to organize and conceal cables, power strips, and adapters beneath your desk. This metal raceway helps create a clutter-free and safer workspace by keeping wires tidy and out of sight. Its open design promotes airflow, preventing dust accumulation and allowing for easy access to cables when needed.
Image 1.1: The cable management tray installed under a desk, showing organized cables and a power strip.
2. Safety Information
Before installation, ensure your desktop material and thickness are suitable for drilling holes. The safe thickness of the table is at least 15mm (0.6 inches) to prevent damage during installation. Always use appropriate safety gear when drilling.
Image 2.1: Important safety notice regarding desktop thickness for drilling.
3. Package Contents
Verify that all components are present before beginning installation:
- Cable Management Tray (1 PC)
- Connecting Bracket (2 PCS)
- M4x6mm Screws (2 PCS)
- St4.8x12mm Screws (4 PCS)
- 2.5x2.5mm Allen Key (1 PC)
Image 3.1: Visual representation of all components included in the package.
Unboxing Video
Video 3.1: An unboxing video demonstrating the contents and initial setup of the cable management tray.
4. Setup and Installation
The cable management tray is designed for screw-in installation to ensure maximum stability. A cardboard template is typically provided to assist with marking drill points accurately. Ensure your desktop meets the minimum thickness requirement of 15mm (0.6 inches) before drilling.
- Position the Tray: Determine the desired location for the tray under your desk.
- Mark Drill Points: Use the provided cardboard template (if available) to accurately mark the screw holes on the underside of your desktop.
- Drill Pilot Holes: Carefully drill pilot holes at the marked points. Use a drill bit appropriate for your desktop material and ensure you do not drill too deep.
- Attach Brackets: Secure the connecting brackets to the desktop using the St4.8x12mm screws.
- Mount Tray: Attach the cable management tray to the installed brackets using the M4x6mm screws and the Allen key.
- Organize Cables: Place your power strips, cables, and adapters into the tray. Utilize the open slots and mesh design to route cables as needed.
Image 4.1: Detailed view of the drilling process for securing the tray.
Installation Guide Video
Video 4.1: Official installation guide for the FlexiSpot Cable Management Tray.
5. Usage and Benefits
The cable management tray provides several advantages for your workspace:
- Clutter-Free Workstation: Consolidate all your cords and power strips in one location, freeing up desk space and eliminating unsightly cable clutter.
- Improved Safety: By organizing cables, you reduce the risk of electrical fires, accidental disconnections, and tripping hazards. This is especially beneficial in busy office or home environments.
- Airflow Open Design: The ventilated design prevents dust accumulation and ensures adequate airflow around electronic components, potentially extending their lifespan. It also allows for easy addition or removal of cables without tangles.
- Pet and Child Safety: Keep wires out of reach of pets and small children, protecting them from potential harm and preventing damage to your electronic equipment.
Image 5.1: Before and after comparison illustrating the effectiveness of cable organization.
Image 5.2: Demonstrates how the tray protects cables from pets.
Cable Management Overview Video
Video 5.3: A short video showcasing the general use and benefits of under-desk cable management.
6. Maintenance
To ensure the longevity and continued effectiveness of your cable management tray:
- Regular Cleaning: Periodically wipe down the tray with a dry or slightly damp cloth to remove dust and debris.
- Check Fasteners: Occasionally inspect the screws and brackets to ensure they remain securely fastened to the desktop. Tighten if necessary.
- Avoid Overloading: Do not exceed the tray's capacity. Distribute the weight of cables and power strips evenly to prevent strain on the mounting points.
7. Troubleshooting
If you encounter any issues with your cable management tray:
- Tray Feels Loose: Check all mounting screws and ensure they are tightened properly. If the desktop material is soft, consider using wall anchors for better grip (though this product is designed for direct screw-in).
- Cables Falling Out: Ensure cables are properly routed through the designated slots and secured with cable ties if needed. The open design is for airflow, but very loose cables may require additional securing.
- Power Strip Does Not Fit: Verify the dimensions of your power strip against the tray's internal dimensions (approximately 4.7 inches wide). Some larger power strips may not fit.
8. Product Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 19.7"L x 4.7"W (500mm x 120mm) |
| Overall Dimensions | 20.16 x 5.24 x 2.8 inches |
| Item Weight | 2.74 pounds |
| Material | Metal |
| Color | White |
| Style | Modern |
| Manufacturer | FLEXISPOT |
| First Available | July 17, 2020 |
Image 8.1: Key dimensions of the cable management tray.
Image 8.2: The open design of the tray promotes airflow and prevents dust accumulation.
9. Warranty and Support
This FLEXISPOT product is manufactured by FLEXISPOT. For specific warranty details and support, please refer to the product's official documentation or contact FLEXISPOT customer service. General return policies may allow for refunds or replacements for up to 2026 days from purchase, depending on the retailer.
