Introduction
This manual provides instructions for the DEERC Programmable Remote Control Dog Toy, Model DEJ-3081870. Please read this manual thoroughly before operating the toy to ensure proper use and to maximize its features.
Image: The DEERC Programmable Remote Control Dog Toy, a white robot dog with black ears and spots, featuring LED eyes and articulated limbs.
Package Contents
Verify that all items listed below are included in your package:
- 1 x Robotic Dog
- 1 x Remote Controller
- 1 x USB Charging Cable
- 1 x User Manual (this document)
- 1 x 3.7V 600mAh Li-ion Battery (pre-installed in the robot)
Important Note:
- The remote controller requires 2 "AA" batteries (not included).
- Adult supervision is recommended during operation.
- Charge the robotic dog fully before first use. The battery may be low due to shipping.
Image: The DEERC robot dog positioned beside its white remote control, which features various buttons for different functions.
Setup
1. Charging the Robotic Dog
- Locate the charging port on the robotic dog. (Refer to image below for location).
- Connect the USB charging cable to the robotic dog's charging port.
- Connect the other end of the USB cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- Allow approximately 2 hours for a full charge. A full charge provides 2-3 hours of play time.
Image: The robot dog connected to a power bank with a USB cable, illustrating the charging process.
2. Installing Batteries in the Remote Controller
- Open the battery compartment on the back of the remote controller.
- Insert 2 "AA" batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
3. Powering On
- Locate the power switch on the robotic dog. (Refer to image below for location).
- Slide the power switch to the "ON" position.
- Turn on the remote controller. The dog and controller should automatically pair.
Image: Detailed view of the robot dog's components, highlighting the power switch and charging port, flexible waist, infrared sensor, and round smooth foot.
Operating Instructions
The DEERC Robotic Dog offers two primary control modes: Infrared Remote Control and Gesture Control.
1. Remote Control Operation
Use the provided remote controller to direct the robotic dog. The control range is approximately 33 feet (10 meters).
Key functions available via remote control include:
- Movement: Forward, Backward, Turn Left, Turn Right.
- Actions: Walk, Slide, Cruise.
- Interactive Functions: Dance, Sing, Play Instruments, Twist, Auto Demo, Bark ("bow wow").
- Programming: Create custom sequences of up to 50 actions.
2. Gesture Control Operation
The robotic dog features a built-in infrared sensor, allowing it to respond to hand gestures for basic movements.
- Position your hand in front of the dog's sensor.
- Move your hand to command the dog:
- Forward: Move hand forward.
- Backward: Move hand backward.
- Turn Left: Move hand left.
- Turn Right: Move hand right.
Image: A sequence of four images showing a hand performing gestures (forward, backward, left, right) to control the robot dog's movement.
3. Interactive Features
- Obstacle Avoidance: The infrared sensor also enables the dog to detect and avoid obstacles automatically.
- Head Touch Interaction:
- Short Press Head: The dog will perform random cute behaviors.
- Long Press Head: The dog will enter a rest mode.
- LED Eye Expressions: The dog's LED eyes display various expressions, enhancing its interactive personality.
Image: A detailed view of the robot dog's face, showcasing a grid of different LED eye patterns that convey various expressions.
Image: A collage showing the robot dog in six distinct poses, illustrating its ability to twist, dance, cruise, slide, walk, and perform coquetry.
Maintenance
- Cleaning: Wipe the robotic dog with a soft, dry cloth. Do not use water or cleaning solutions, as this may damage electronic components.
- Battery Care:
- Always ensure the robotic dog is fully charged before storage if it will not be used for an extended period.
- Remove "AA" batteries from the remote controller if it will not be used for an extended period to prevent leakage.
- Storage: Store the toy in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robotic dog does not turn on. | Battery is depleted or not properly connected. | Charge the robotic dog fully. Ensure the internal battery is correctly seated. |
| Remote controller not working. | "AA" batteries are depleted or incorrectly installed. | Replace "AA" batteries in the remote controller, ensuring correct polarity. |
| Dog does not respond to commands. | Out of range, interference, or pairing issue. | Ensure the dog and controller are within 33ft. Turn both off and on again to re-establish connection. Avoid operating near other strong radio signals. |
| Gesture control is inconsistent. | Obstruction of infrared sensor or improper gesture. | Ensure the infrared sensor on the dog's chest is clear. Perform gestures clearly and directly in front of the sensor. |
| Dog bumps into obstacles. | Infrared sensor is obstructed or dirty. | Clean the infrared sensor area. Ensure no objects are blocking the sensor's view. |
Specifications
| Feature | Detail |
|---|---|
| Brand | DEERC |
| Model Number | DEJ-3081870 |
| Material | Plastic |
| Color | White |
| Product Dimensions (LxWxH) | 24.9 x 21 x 24.9 cm (9.84 x 8.27 x 9.84 inches) |
| Item Weight | 1.2 kg (2.65 lbs) |
| Robotic Dog Battery | 3.7V 600mAh Li-ion (rechargeable) |
| Remote Controller Battery | 2 x "AA" batteries (not included) |
| Charging Time | Approx. 2 hours |
| Play Time | Approx. 2-3 hours |
| Control Range | Approx. 33 feet (10 meters) |
| Recommended Age | 3 years and up |
Warranty and Support
Information regarding product warranty and customer support was not provided in the source data. Please refer to the product packaging or the retailer's website for details on warranty coverage and how to contact customer support for the DEERC Programmable Remote Control Dog Toy.
